TITLE

Electrochromic properties of niobium oxide thin films prepared by radio-frequency magnetron

AUTHOR(S)
Maruyama, Toshiro; Arai, Susumu
PUB. DATE
August 1993
SOURCE
Applied Physics Letters;8/16/1993, Vol. 63 Issue 7, p869
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Presents the electrochemical and optical properties of niobium oxide thin films prepared by radio frequency magnetron sputtering method. Examination of the optical properties under electrochemical polarization in spectroelectrochemical cells; Electrochromic behavior of the amorphous films; Use of x-ray diffraction to confirm deposition conditions.
ACCESSION #
4258219

 

Related Articles

  • Green luminescent center in undoped zinc oxide films deposited on silicon substrates. Lin, Bixia; Fu, Zhuxi; Jia, Yunbo // Applied Physics Letters;8/13/2001, Vol. 79 Issue 7 

    The photoluminescence (PL) spectra of the undoped ZnO films deposited on Si substrates by dc reactive sputtering have been studied. There are two emission peaks, centered at 3.18 eV (UV) and 2.38 eV (green). The variation of these peak intensities and that of the I–V properties of the...

  • Pulsing frequency induced change in optical constants and dispersion energy parameters of WO3 films grown by pulsed direct current magnetron sputtering. Punitha, K.; Sivakumar, R.; Sanjeeviraja, C. // Journal of Applied Physics;2014, Vol. 115 Issue 11, p113512-1 

    In this work, we present the pulsing frequency induced change in the structural, optical, vibrational, and luminescence properties of tungsten oxide (WO3) thin films deposited on microscopic glass and fluorine doped tin oxide (SnO2:F) coated glass substrates by pulsed dc magnetron sputtering...

  • Effect of Substrate Temperature on Structural and Optical Properties of Nitrogen Doped SnO2 Thin Film. Thakur, Anup; Kumar, Varinder; Se Jun Kang; Ik-Jae Lee; Gautam, Sanjeev; Chae, K. H.; Hyun Joon Shin // AIP Conference Proceedings;2014, Vol. 1591, p1027 

    Nitrogen doped SnO2thin films (thickness ~ 250 nm) were deposited at different substrate temperature by radio frequency (rf) sputtering method. Crystal structure, morphology and optical properties of these films were investigated by x-ray diffraction (XRD), atomic force microscopy (AFM) and...

  • Correlation between microstructure and optical properties of ... thin films. Kim, Jin-Hong // Journal of Applied Physics;12/15/1999, Vol. 86 Issue 12, p6770 

    Presents information on a study which investigated the microstructure and optical properties of amorphous and crystalline thin films created under different sputtering conditions. Experimental method; Results and discussion; Conclusions.

  • Electrical and optical properties of CN[sub x](0≤x≤0.25) films deposited by reactive magnetron sputtering. Broitman, E.; Hellgren, N.; Ja¨rrendahl, K.; Johansson, M. P.; Olafsson, S.; Radnóczi, G.; Sundgren, J.-E.; Hultman, L. // Journal of Applied Physics;1/15/2001, Vol. 89 Issue 2, p1184 

    The electrical and optical properties of carbon-nitride CN[sub x] films (0≤x≤0.25) deposited by unbalanced reactive magnetron sputtering from a graphite target in mixed Ar/N[sub 2] discharges at a substrate temperature of 350 °C have been investigated. Pure C films exhibit a dark...

  • Optical and electrochemical properties of dc magnetron sputtered Ti-Ce oxide films. Azens, A.; Kullman, L. // Applied Physics Letters;6/24/1996, Vol. 68 Issue 26, p3701 

    Examines the optical and electrochemical properties of direct current magnetron sputtered titanium-cerium oxide films. Dependence of the optical and electrochemical properties to the composition; Optical behavior of the films under charge insertion; Suitability of optically passive films as...

  • High-performing visible-blind photodetectors based on SnO2/CuO nanoheterojunctions. Ting Xie; Hasan, Md Rezaul; Botong Qiu; Arinze, Ebuka S.; Nguyen, Nhan V.; Motayed, Abhishek; Thon, Susanna M.; Debnath, Ratan // Applied Physics Letters;12/14/2015, Vol. 107 Issue 24, p1 

    We report on the significant performance enhancement of SnO2 thin film ultraviolet (UV) photodetectors (PDs) through incorporation of CuO/SnO2 p-n nanoscale heterojunctions. The nanoheterojunctions are self-assembled by sputtering Cu clusters that oxidize in ambient to form CuO. We attribute the...

  • Sol-gel versus sputtering indium tin oxide films as transparent conducting oxide materials. Duta, M.; Anastasescu, M.; Calderon-Moreno, J.; Predoana, L.; Preda, S.; Nicolescu, M.; Stroescu, H.; Bratan, V.; Dascalu, I.; Aperathitis, E.; Modreanu, M.; Zaharescu, M.; Gartner, M. // Journal of Materials Science: Materials in Electronics;May2016, Vol. 27 Issue 5, p4913 

    The aim of this paper is the replacing of the expensive sputtering method with the low cost sol-gel one in TCO applications. To this end two sets of indium tin oxide (ITO) thin films are compared and discussed in this paper: one obtained by r.f. sputtering and one by the sol-gel technique and...

  • Fiber laser annealing of indium-tin-oxide nanoparticles for large area transparent conductive layers and optical film characterization. Pan, Heng; Lee, Daeho; Ko, Seung; Grigoropoulos, Costas; Park, Hee; Hoult, Tony // Applied Physics A: Materials Science & Processing;Jul2011, Vol. 104 Issue 1, p29 

    Indium tin oxide (ITO) coatings are widely used as transparent electrodes for optoelectronic devices. The most common preparation methods are sputtering, evaporation, and wet chemical deposition. ITO coatings can also be manufactured by solution deposition of ITO nanoparticles followed by...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics