TITLE

Organic electroluminescent devices based on the molecularly doped polymers

AUTHOR(S)
Kido, Junji; Kohda, Masafumi
PUB. DATE
August 1992
SOURCE
Applied Physics Letters;8/17/1992, Vol. 61 Issue 7, p761
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Presents organic electroluminescent (EL) devices based on molecularly doped polymers (MDP). Observation of carrier injection from the electrodes to the doped poly(methyl methacrylate) (PMMA) layer; Dependence of the EL intensity on the ratio of the dopants in the PMMA layer; Basis of the carrier transport mechanism in MDP.
ACCESSION #
4258176

 

Related Articles

  • Graded doping profiles for reduction of carrier trapping in organic light-emitting devices incorporating doped polymers. Chang, Hsin-Hua; Wu, Chung-Chih; Yang, Cheng-Chung; Chen, Chieh-Wei; Lee, Cheng-Chung // Applied Physics Letters;1/29/2001, Vol. 78 Issue 5, p574 

    Dispersing emissive dopants into luminescent polymers is an effective approach to enhance luminescence and to tune emission color in organic light-emitting devices incorporating polymer films. However, the carrier trapping effect due to emissive dopants often causes deterioration of electrical...

  • Efficient multilayer electroluminescence devices with... O'Brien, D.; Bleyer, A.; Lidzey, D. G.; Bradley, D. D. C.; Tsutsui, T. // Journal of Applied Physics;9/1/1997, Vol. 82 Issue 5, p2662 

    Studies the use of a highly luminescent conjugated polymer as an emissive layer in single and multilayer electroluminescence devices. External quantum efficiencies; Optimization of the injection and transport of each carrier type; Introduction of energy offsets at the polymer/polymer interface.

  • Single-layer white light-emitting organic electroluminescent devices based on dye-dispersed.... Kido, J.; Shionoya, H. // Applied Physics Letters;10/16/1995, Vol. 67 Issue 16, p2281 

    Presents a bright single-layer white light-emitting organic electroluminescent devices. Presence of a polymer layer in the active layer; Dispersion of poly(N-vinylcarbazole) with electron-transporting additives; Derivation of white light with a maximum luminescence of 4100 cd/square meter.

  • Voltage controlled two color light-emitting electrochemical cells. Yang Yang; Qibing Pei // Applied Physics Letters;5/6/1996, Vol. 68 Issue 19, p2708 

    Presents a two color light emitting electrochemical cell (LEC) made from semiconducting polymers and controlled by bias voltage reversal. Composition of the LEC polymers; Characteristics of the electroluminescence spectra of the cell; Effects of polarity changes on the device.

  • Bulk limited conduction in electroluminiscent polymer devices. Campbell, A. J.; Weaver, M. S. // Journal of Applied Physics;12/15/1998, Vol. 84 Issue 12, p6737 

    Investigates bulk limited conduction in electroluminiscent polymer devices. Details on the experiment; Results and discussion.

  • Planar light-emitting devices fabricated with luminescent electrochemical polyblends. Yu, G.; Pei, Q. // Applied Physics Letters;2/24/1997, Vol. 70 Issue 8, p934 

    Develops light-emitting devices fabricated in planar configurations with luminescent electrochemical polyblends. Composition of the polymer blends used as active materials; Location of the electrochemical doping under external bias exposure; Light emission of the device on transparent substrates.

  • Polarity- and voltage-controlled color-variable light-emitting devices based on conjugated polymers. Wang, Y.Z.; Sun, R.G.; Wang, D.K.; Swager, T.M.; Epstein, A.J. // Applied Physics Letters;5/3/1999, Vol. 74 Issue 18, p2593 

    Studies the fabrication of voltage and polarity controlled multilayer multicolor light-emitting devices based on conjugated polymers. Common approach to color-variable devices; Reaction of the devices on reverse and forward bias; Configuration of the voltage-controlled multicolor device.

  • Taking the buzz out of office lights.  // Chemistry in Australia;Mar2013, p9 

    The article reports that Wake Forest University scientists have developed a flicker-free, shatterproof alternative for large-scale lighting that is based on field-induced polymer electroluminescent (FIPEL) technology that gives off soft, white light.

  • Organic light emitting devices with enhanced outcoupling via microlenses fabricated by imprint lithography. Sun, Yiru; Forrest, Stephen R. // Journal of Applied Physics;10/1/2006, Vol. 100 Issue 7, p073106 

    High efficiency white organic light emitting devices (WOLEDs) with optical outcoupling enhanced by hexagonal polymethylmethacrylate microlens arrays fabricated by imprint lithography on a glass substrate are demonstrated. Monte Carlo and finite difference time domain simulations of the emitted...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics