TITLE

Fabrication of polymer light-emitting diodes using doped silicon electrodes

AUTHOR(S)
Parker, I.D.; Kim, Helen H.
PUB. DATE
April 1994
SOURCE
Applied Physics Letters;4/4/1994, Vol. 64 Issue 14, p1774
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the fabrication of light-emitting diodes (LED) from semiconducting conjugated polymer. Use of doped silicon substrates as an electrode material; Possibility of the procedure to integrate LED into silicon based integrated circuitry; Demonstration of low-voltage light emission from polymer LED.
ACCESSION #
4255075

 

Related Articles

  • Stabilization of electrode migration in polymer electroluminescent devices. Chua, Soo-Jin; Ke, Lin; Kumar, Ramadas Senthil; Zhang, Keran // Applied Physics Letters;8/5/2002, Vol. 81 Issue 6, p1119 

    A thin 3-nm-thick parylene layer is deposited by chemical vapor deposition at room temperature on the indium tin oxide (ITO) coated glass substrate to form a bilayer anode of an organic light emitting diode. The parylene layer forms a conformal film to cover the spikes present in the ITO film....

  • Polymeric anodes for improved polymer light-emitting diode performance. Carter, S.A.; Angelopoulos, M. // Applied Physics Letters;4/21/1997, Vol. 70 Issue 16, p2067 

    Examines the use of polyaniline and polyethylenedioxythiophene transparent electrodes as hole-injecting anodes in polymer light emitting diodes. Presentation of the anodes doped with variety of polymer and monomer-based acid; Effect of the dopant and solvent on the hole-injection properties;...

  • Light outcoupling efficiency of top-emitting organic light-emitting diodes. Smith, L. H.; Wasey, J. A. E.; Barnes, W. L. // Applied Physics Letters;4/19/2004, Vol. 84 Issue 16, p2986 

    We report results obtained from modeling the light outcoupling efficiency of top–emitting organic light-emitting diode (OLED) structures and compare them with results from conventional substrate-emitting structures. We investigate two types of emissive material, small molecule and...

  • High efficiency low operating voltage polymer light-emitting diodes with aluminum cathode. Deng, X.Y.; Lau, W.M.; Wong, K.Y.; Low, K.H.; Chow, H.F.; Cao, Y. // Applied Physics Letters;5/3/2004, Vol. 84 Issue 18, p3522 

    By blending poly(ethylene glycol) (PEG) into an electroluminescence (EL) polymer, significantly enhanced EL efficiency in a polymer light-emitting diode (PLED) with aluminum electrode was achieved. An orange-color-emitting PLED with 10 wt % PEG blending achieved device efficiencies exceeding 2.6...

  • Efficiency enhancement of an organic light-emitting diode with a cathode forming two-dimensional periodic hole array. Liu, C.; Kamaev, V.; Vardeny, Z. V. // Applied Physics Letters;4/4/2005, Vol. 86 Issue 14, p143501 

    We fabricated an organic light-emitting diode using a π-conjugated polymer emissive layer sandwiched between two semitransparent electrodes: an optically thin gold film anode, whereas the cathode was in the form of an optically thick aluminum (Al) film with patterned periodic subwavelength...

  • Hybrid light-emitting polymer device fabricated on a metallic nanowire array. Strevens, A. E.; Drury, A.; Lipson, S. M.; Kröll, M.; Blau, W. J.; Hörhold, H. H. // Applied Physics Letters;4/4/2005, Vol. 86 Issue 14, p143503 

    An electrode comprised of a copper nanowire array, fabricated by electrodeposition into a porous alumina membrane, is incorporated into a single-layer organic light-emitting device. The 48-nm-diameter copper nanowires form an array of electrical nanocontacts. Current–voltage and...

  • Efficient multilayer white polymer light-emitting diodes with aluminum cathodes. Niu, Xiaodi; Qin, Chuanjiang; Zhang, Baohua; Yang, Junwei; Xie, Zhiyuan; Cheng, Yanxiang; Wang, Lixiang // Applied Physics Letters;5/14/2007, Vol. 90 Issue 20, p203513 

    Efficient multilayer white polymer light-emitting diodes (WPLEDs) with aluminum cathodes are fabricated. The multilayer structure is composed of a water soluble hole-injection layer, a toluene-soluble emissive layer, and an alcohol-soluble emissive layer. The polarity difference of the solvents...

  • Emission through one of two metal electrodes of an organic light-emitting diode via surface-plasmon cross coupling. Gifford, Dawn K.; Hall, Dennis G. // Applied Physics Letters;12/2/2002, Vol. 81 Issue 23, p4315 

    We report strong surface emission from an organic light-emitting diode in which the luminescent material resides between two nearly opaque metal electrodes. Experimental and theoretical analyses indicate that cross coupling between surface plasmons on opposite sides of the metal cathode layer...

  • Mechanisms of injection enhancement in organic light-emitting diodes through an Al/LiF electrode. Heil, H.; Steiger, J.; Karg, S.; Gastel, M.; Ortner, H.; von Seggern, H.; Sto¨ßel, M. // Journal of Applied Physics;1/1/2001, Vol. 89 Issue 1, p420 

    The mechanisms of enhanced electron injection into the electron transport layer of Alq[sub 3] [tris(8-hydroxyquinoline)-aluminum] via LiF interlayers are studied by means of I-V characteristics, secondary ion mass spectroscopy (SIMS), and Kelvin probe measurements. Devices for single carrier...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics