TITLE

Heat propagation in high T[sub c] films investigated by optical response measurements

AUTHOR(S)
Zeuner, S.; Lengfellner, H.
PUB. DATE
August 1992
SOURCE
Applied Physics Letters;8/24/1992, Vol. 61 Issue 8, p973
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Investigates the thermal properties of the granular thallium-barium-calcium-copper-oxygen films. Analysis of the optical response of the films; Use of a heat transfer model; Estimation of the boundary resistance between the film and the substrate; Dependence of the response time on the film thickness; Origin of the response.
ACCESSION #
4254974

 

Related Articles

  • Meet the Demands of High-Temperature Applications With Thin Film Resistors. Flassayer, Claude // ECN: Electronic Component News;Oct2010, Vol. 54 Issue 11, p16 

    The article offers information on thermal management that would meet the growing demand for high-temperature applications with thin film resistors. It explores the two types of surface-mounted thin film resistors including the wraparound chip resistors and arrays by solder reflow, and the bare...

  • Thermal criticality for a reactive gravity driven thin film flow of a third-grade fluid with adiabatic free surface down an inclined plane. Makinde, Oluwole // Applied Mathematics & Mechanics;Mar2009, Vol. 30 Issue 3, p373 

    This study is devoted to the investigation of thermal criticality for a reactive gravity driven thin film flow of a third-grade fluid with adiabatic free surface down an inclined isothermal plane. It is assumed that the reaction is exothermic under Arrhenius kinetics, neglecting the consumption...

  • Thermal transport in organic semiconducting polymers. Duda, John C.; Hopkins, Patrick E.; Shen, Yang; Gupta, Mool C. // Applied Physics Letters;6/24/2013, Vol. 102 Issue 25, p251912 

    We report on the thermal conductivities of poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate), [6,6]-phenyl C61-butyric acid methyl ester (PCBM), poly(3-hexylthiophene-2,5-diyl) (P3HT), and P3HT:PCBM blend thin films as measured by time domain thermoreflectance. Thermal conductivities vary...

  • Thickness dependent thermal conductivity of gallium nitride. Ziade, Elbara; Jia Yang; Brummer, Gordie; Nothern, Denis; Moustakas, Theodore; Schmidt, Aaron J. // Applied Physics Letters;1/16/2017, Vol. 110 Issue 3, p1 

    As the size of gallium nitride (GaN) transistors is reduced in order to reach higher operating frequencies, heat dissipation becomes the critical bottleneck in device performance and longevity. Despite the importance of characterizing the physics governing the thermal transport in thin GaN...

  • Stability of the normal phase in a bounded current-carrying superconducting film. Rudyı, A. S. // Technical Physics;Jun98, Vol. 43 Issue 6, p678 

    The two-phase equilibrium states of a current-carrying thin superconducting film in the case of convective heat transfer on the free surface are considered, and their stability is investigated in a first approximation. It is shown that of the two equilibrium states, the state with the...

  • Modeling for thermal conductivity measurements of thin films using photothermal deflection with obliquely crossed configuration. Li, B.-C.; Zhang, S.-Y. // Applied Physics B: Lasers & Optics;1997, Vol. 65 Issue 3, p403 

    A three-dimensional theoretical model has been developed to calculate the normal probe-beam deflection of obliquely crossed photothermal deflection configuration in samples including thin films and substrates, which is applied to thermal conductivity measurements of thin films deposited on the...

  • Manage the Risk of Radiant Energy. BAILEY, DOUG // Fire Engineering;Nov2012, Vol. 165 Issue 11, p101 

    The article discusses radiant energy from heat transfer in fires, focusing on the risk of burns or scalds from exposure to radiant energy such as electromagnetic radiation (EMR). First responders have used lightweight protective proximity suits made from vacuum vapor deposition (VVD) aluminized...

  • Comparing heat transfer fluids.  // Process Heating;Jan/Feb97, Vol. 4 Issue 1, p27 

    Presents a chart highlighting the features of different heat transfer fluids. Includes fluids by Amoco Lubricants; Ausimont USA Inc.; Coastal Chemical Co. Inc.

  • Microstructure and electrical resistivity of Cu and Cu...Ge thin films on ... alloy layers. Aboelfotoh, M. O.; Borek, M. A. // Journal of Applied Physics;1/1/2000, Vol. 87 Issue 1, p365 

    Presents information on a study on the reaction between Cu and ... thin films and ... alloy layers epitaxially grown on Si(100) in the temperature of 250-400 degree Celsius. Experimental procedure; Results and discussion; Conclusion.

  • Local probing of thermal properties at submicron depths with megahertz photothermal vibrations. Tomoda, M.; Shiraishi, N.; Kolosov, O. V.; Wright, O. B. // Applied Physics Letters;1/27/2003, Vol. 82 Issue 4, p622 

    We demonstrate the imaging of buried features in a microstructure—a tiny hole in an aluminum thin film covered by a chromium layer—with nanometer lateral resolution using a transient temperature distribution restricted to within ∼0.5 µm of the sample surface. This is...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics