TITLE

Integrated optic mode-size tapers by selective organometallic chemical vapor deposition of

AUTHOR(S)
Deri, R.J.; Caneau, C.
PUB. DATE
August 1992
SOURCE
Applied Physics Letters;8/24/1992, Vol. 61 Issue 8, p952
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Demonstrates low-loss optical mode-size tapers in indium gallium arsenide/indium phosphide optical wave guides grown by organometallic chemical vapor deposition. Increase of the vertical mode size; Achievement of taper losses; Application of the grown tapers on improving coupling to lasers.
ACCESSION #
4254965

 

Related Articles

  • High-power operation of index-guided visible GaAs/GaAlAs multiquantum well lasers. Uomi, K.; Nakatsuka, S.; Ohtoshi, T.; Ono, Y.; Chinone, N.; Kajimura, T. // Applied Physics Letters;1984, Vol. 45 Issue 8, p818 

    Stable transverse mode operation has been realized for the first time in visible (780 nm) multiquantum well lasers composed of seven 3-nm-thick GaAs wells separated by six 5-nm-thick Ga0.8Al0.2As barriers grown by metalorganic chemical vapor deposition. A self-aligned structure with a built-in...

  • 8 W continuous wave front-facet power from broad-waveguide Al-free 980 nm diode lasers. Mawst, L. J.; Bhattacharya, A.; Lopez, J.; Botez, D.; Garbuzov, D. Z.; DeMarco, L.; Connolly, J. C.; Jansen, M.; Fang, F.; Nabiev, R. F. // Applied Physics Letters;9/9/1996, Vol. 69 Issue 11, p1532 

    Al-free 980 nm InGaAs/InGaAsP/InGaP laser structures grown by low-pressure metalorganic chemical vapor deposition (LP-MOCVD) have been optimized for high cw output power by incorporating a broad waveguide design. Increasing the optical-confinement layer total thickness from 0.2 to 1.0 μm...

  • Very low threshold buried ridge structure lasers emitting at 1.3 μm grown by low pressure metalorganic chemical vapor deposition. Razeghi, M.; Blondeau, R.; Kazmierski, K.; Krakowski, M.; Duchemin, J. P. // Applied Physics Letters;1/15/1985, Vol. 46 Issue 2, p131 

    GaInAsP-InP buried ridge structure lasers emitting at 1.3 μm have been fabricated on material grown completely by low pressure metalorganic chemical vapor deposition. These lasers have low threshold (11 mA), exhibit linear (kink-free) light-current characteristics up to high powers (10...

  • Dynamics of patterned laser-induced chemical vapor deposition. Jelski, Daniel A.; George, Thomas F. // Journal of Applied Physics;3/15/1987, Vol. 61 Issue 6, p2353 

    Presents a study which examined the patterned laser-induced chemical vapor deposition. Growth mechanism; Derivation of rate equation; Discussion.

  • High-power single longitudinal mode operation of inverted channel substrate planar lasers. Yang, Jane J.; Hong, C. S.; Niesen, J.; Figueroa, L. // Journal of Applied Physics;12/1/1985, Vol. 58 Issue 11, p4480 

    Presents a study which developed a high-power single longitudinal mode operation of inverted channel substrate planar lasers using the metalorganic chemical vapor deposition technique. Method of the study; Results and discussion; Conclusion.

  • A criterion for the suppression of plastic deformation in laser-assisted chemical vapor deposition of GaAs. Hussien, S. A.; Fahmy, A. A.; El-Masry, N. A.; Bedair, S. M. // Journal of Applied Physics;4/15/1990, Vol. 67 Issue 8, p3853 

    Presents a study which proposed a model to estimate the allowed temperature rise during the laser-induced chemical vapor deposition process. Details of the model; Results and discussion; Conclusions.

  • Etched-groove coupled-cavity vapor-phase-transported window lasers at 1.55 μm. Coldren, L. A.; Koch, T. L.; Bridges, T. J.; Burkhardt, E. G.; Miller, B. I.; Rentschler, J. A. // Applied Physics Letters;Jan1985, Vol. 46 Issue 1, p5 

    The fabrication and characterization of a new two-section etched-groove laser that uses vapor phase regrowth are given. A single undoped InP regrowth forms the buried heterostructure laser sidewalls and facilitates the formation of high-quality single-material etched-mirror facets. Low threshold...

  • Photon mode localization in disordered arrays of vertical cavity surface emitting lasers. Golshani, A.; Pier, H. // Journal of Applied Physics;2/15/1999, Vol. 85 Issue 4, p2454 

    Presents information on a study of coupled arrays of vertical cavity surface emitting lasers with controlled optical disorder. Information on organometallic chemical vapor deposition; Reflectivity patterning of the top cavity mirrors; Localization of photon modes; Results and discussions.

  • Laser chemical vapor deposition of gold. Baum, Thomas H.; Jones, Carol R. // Applied Physics Letters;9/1/1985, Vol. 47 Issue 5, p538 

    High quality gold spots and lines have been deposited from gaseous dimethyl (2, 4-pentanedionato) gold (III) using a focused argon ion laser. Growth rates of 1 μm/s at power densities of 4×105 W/cm2 were obtained. Resistivity, threshold writing power densities, and deposition rates were...

  • Atomic layer growth of silicon by excimer laser induced cryogenic chemical vapor deposition. Tanaka, T.; Fukuda, T.; Nagasawa, Y.; Miyazaki, S.; Hirose, M. // Applied Physics Letters;4/9/1990, Vol. 56 Issue 15, p1445 

    Polycrystalline silicon has been grown by ArF excimer laser (193 nm) induced dissociation of Si2H6 adsorbed on a quartz substrate cooled to -69 °C. Silicon atomic layer growth has also been achieved by controlling the Si2H6 adsorbed layer thickness. It is found that the chemical reactivity of...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics