TITLE

Off-axis laser deposition of YBa[sub 2]Cu[sub 3]O[sub 7 - delta] thin films

AUTHOR(S)
Holzapfel, B.; Roas, B.
PUB. DATE
December 1992
SOURCE
Applied Physics Letters;12/28/1992, Vol. 61 Issue 26, p3178
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the Yba[sub 2]Cu[sub 3]O[sub 7-delta] (YBCO) thin-film preparation by laser deposition geometry. Modification of laser deposition by substrate orientation change; Rotation of the substrate to obtain uniform temperature; Measurement of the critical current density in YBCO films.
ACCESSION #
4250685

 

Related Articles

  • Effective surface resistance of LuBa[sub 2]Cu[sub 3]O[sub 7-delta] thin films. Pinto, R.; Chourey, A.G. // Applied Physics Letters;4/18/1994, Vol. 64 Issue 16, p2166 

    Examines the surface resistance of LuBa[sub 2]Cu[sub 3]O[sub 7-delta] thin films grown on LaAlO[sub 3] by pulsed laser deposition. Use of microstrip resonator technique to assess the surface resistance; Details on critical current density and film thickness; Existence of strain caused by ionic...

  • Growth of HgBa[sub 2]Ca[sub 2]Cu[sub 3]O[sub 8] thin films using stable Re[sub 0.1]Ba[sub 2]Ca[sub 2]Cu[sub 3]O[sub x] precursor by pulsed laser deposition. Kang, W. N.; Meng, R. L.; Chu, C. W. // Applied Physics Letters;7/20/1998, Vol. 73 Issue 3 

    High quality c-axis oriented HgBa[sub 2]Ca[sub 2]Cu[sub 3]O[sub 8] thin films have been fabricated with the stable Re-doped Ba[sub 2]Ca[sub 2]Cu[sub 3]O[sub x] precursor powder by pulsed laser deposition followed by postannealing without any special handling. As-grown films on (100) SrTiO[sub 3]...

  • Flux pinning properties of YBCO/DyBCO multilayers. Develos-Bagarinao, K.; Yamasaki, H.; Ohki, K. // Journal of Applied Physics;Sep2008, Vol. 104 Issue 6, p063907 

    Multilayered structures of YBa2Cu3O7-δ (YBCO) interlayered with thin layers of DyBa2Cu3O7-δ (DyBCO) were prepared on CeO2-buffered r-cut sapphire (Al2O3) substrates by pulsed laser deposition. Evaluation of the magnetic-field angular dependence of the critical current density [Jc(H,θ)]...

  • Relation between the critical current and the n value of ReBCO thin films: A scaling law for flux pinning of ReBCO thin films. Oh, Sangjun; Choi, Heekyung; Lee, Chulhee; Lee, Sangmoo; Yoo, Jaeun; Youm, Dojun; Yamada, H.; Yamasaki, H. // Journal of Applied Physics;8/15/2007, Vol. 102 Issue 4, p043904 

    Detailed field and angle dependencies of the critical current and the n value for a SmBCO coated conductor have been measured. It was found that the field dependence of the n value can be fitted by an empirical power law with three parameters including the irreversibility field. We also found...

  • Growth of Bi2Sr2CaCu2O8+δ thin films with enhanced superconducting properties by incorporating CaIrO3 nanoparticles. De Vero, J. C.; Hwang, I.; Santiago, A. C. L.; Chang, J.; Kim, J.; Sarmago, R. V.; Song, J. H. // Applied Physics Letters;4/28/2014, Vol. 104 Issue 17, p1 

    We synthesized Bi2Sr2CaCu2O8+δ (Bi-2212) thin films with incorporated CaIrO3 (Ca-iridate) nanoparticles, by using pulsed laser deposition and post-growth ex situ annealing. We found that the density of incorporated Ca-iridate strongly affected the superconducting properties and microstructure...

  • Mechanisms for enhanced supercurrent across meandered grain boundaries in high-temperature superconductors. Feldmann, D. M.; Holesinger, T. G.; Feenstra, R.; Cantoni, C.; Zhang, W.; Rupich, M.; Li, X.; Durrell, J. H.; Gurevich, A.; Larbalestier, D. C. // Journal of Applied Physics;Oct2007, Vol. 102 Issue 8, p083912 

    It has been well established that the critical current density Jc across grain boundaries (GBs) in high-temperature superconductors decreases exponentially with misorientation angle θ beyond ∼2°–3°. This rapid decrease is due to a suppression of the superconducting order...

  • Fabrication and photosensitivity of AgInSe[sub 2]/III�VI isotypic heterojunctions. Rud�, V. Yu.; Gremenok, V. F.; Rud�, Yu. V.; Bekimbetov, R. N.; Bodnar�, I. V. // Semiconductors;Oct99, Vol. 33 Issue 10, p1097 

    AgInSe[sub 2] thin films on glass substrates have been prepared by pulsed laser deposition. Rectifying heterojunctions with a pronounced photovoltaic effect have been fabricated for the first time by placing such films in optical contact with layered III-VI (InSe, GaSe) semiconductors. The...

  • Critical dimensions for YBCO islands grown by pulsed laser deposition. Gilmore, C.M.; Kim, J. // Applied Physics A: Materials Science & Processing;2002, Vol. 75 Issue 5, p565 

    Islands of constant width at half maximum of approximately 100 nm have been observed during the pulsed laser deposition of films of nominal thickness from 0.7 to 3.0 nm of the material YBa[sub 2] Cu[sub 3] O[sub 7-d] (YBCO) on substrates of SrTiO[sub 3] . The critical island dimensions of width,...

  • Laser deposition of diamondlike carbon films at high intensities. Qian, F.; Singh, R.K. // Applied Physics Letters;11/20/1995, Vol. 67 Issue 21, p3120 

    Presents a method of laser deposition of diamondlike carbon films at high intensities. Utilization of high titanium: sapphire solid state laser system in the process; Analysis of the film quality using scanning and transmission electron microscopy; Production of smooth, partially transparent films.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics