TITLE

Investigation of excimer laser ablation of ceramic and thin film Y-Ba-Cu-O using nanosecond

AUTHOR(S)
Dyer, P.E.; Farrar, S.
PUB. DATE
April 1992
SOURCE
Applied Physics Letters;4/13/1992, Vol. 60 Issue 15, p1890
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Investigates the excimer laser ablation of ceramic and thin film yttrium-barium-copper-oxygen superconductors. Use of nanosecond photoacoustic techniques; Validation of transient surface pressure within the framework of a surface evaporation model; Establishment of an alternative removal mechanism based on explosive removal concept.
ACCESSION #
4250506

 

Related Articles

  • Superconducting (Bi,Pb)-Ca-Sr-Cu-O thin films prepared in situ by laser ablation. Ivanov, Z.; Brorsson, G. // Applied Physics Letters;11/13/1989, Vol. 55 Issue 20, p2123 

    Superconducting Bi-Ca-Sr-Cu-O and Bi-Pb-Ca-Sr-Cu-O films were grown in situ by excimer laser ablation from pressed powder and sintered superconducting targets, respectively. The substrate temperature during deposition was found to be important to obtain a maximum transition temperature. Both 110...

  • Effects of beam parameters on excimer laser deposition of YBa2Cu3O7-δ. Muenchausen, R. E.; Hubbard, K. M.; Foltyn, S.; Estler, R. C.; Nogar, N. S.; Jenkins, C. // Applied Physics Letters;2/5/1990, Vol. 56 Issue 6, p578 

    Broad angular distributions have been observed for XeCl laser ablation plumes used in the deposition of YBa2Cu3O7-δ thin films. Distributions (inferred from film thickness) and film stoichiometry were measured as a function of laser fluence, beam shape, and oxygen pressure. Parallel to the...

  • Empirical photoablation rate model exemplified with the etching of polyphenylquinoxaline. Lazare, Sylvain; Granier, Vincent // Applied Physics Letters;2/27/1989, Vol. 54 Issue 9, p862 

    A kinetic model of photoablation with the nanosecond pulses of an excimer laser, based on the so-called moving interface, is presented. The rate of the ablating interface is assumed to be v=k(I-It) when the intensity I exceeds the threshold intensity It. The intensity reaching the interface I...

  • Influence of the beam spot size on ablation rates in pulsed-laser processing. Eyett, M.; Bäuerle, D. // Applied Physics Letters;12/14/1987, Vol. 51 Issue 24, p2054 

    Ablation rates in pulsed-laser processing depend heavily on the laser beam spot size. This has been observed for the first time for a number of different materials. Detailed investigations on this effect, performed by means of XeCl excimer-laser radiation and the example of LiNbO3, are reported...

  • Periodic morphological modification developed on the surface of polyethersulfone by XeCl excimer laser photoablation. Niino, Hiroyuki; Nakano, Masashi; Nagano, Shozaburo; Yabe, Akira; Miki, Tetsuro // Applied Physics Letters;7/31/1989, Vol. 55 Issue 5, p510 

    Periodic and stable micropatterns appeared on the surface of amorphous polyethersulfone etched with an excimer laser at 308 nm in ambient air and a vacuum. The control of such radiative conditions as fluence and incident angle enables us to modify the spacing and pattern of the microstructures....

  • Laser photoablation processes in organosilane thin films. Marinero, E. E.; Miller, R. D. // Applied Physics Letters;4/20/1987, Vol. 50 Issue 16, p1041 

    We report on the excimer laser-induced photoablation of some organosilane polymers utilizing quartz microbalance techniques to monitor the nature of the ablation phenomenon. A fluence threshold for the ablation process is identified beyond which the material removal rate depends nonlinearly on...

  • XeCl excimer laser ablation of a polyethersulfone film: Dependence of periodic microstructures on a polarized beam. Niino, Hiroyuki; Shimoyama, Masashi; Yabe, Akira // Applied Physics Letters;11/26/1990, Vol. 57 Issue 22, p2368 

    Highly periodic stable microstructures appeared on the surface of polyethersulfone (PES) by XeCl excimer laser ablation with a single polarized beam in ambient air. Its formation mechanism was investigated using the time-resolved light scattering technique with the pulsed light of an XeF excimer...

  • Switching from photochemical to photothermal mechanism in laser ablation of benzene solutions. Hatanaka, Koji; Kawao, Mitsushi; Tsuboi, Yasuyuki; Fukumura, Hiroshi; Masuhara, Hiroshi // Journal of Applied Physics;12/1/1997, Vol. 82 Issue 11, p5799 

    Investigates the nanosecond KrF excimer laser ablation of benzyl chloride, benzyl alcohol, toluene, ethylbenzene and n-propylbenzene diluted in n-hexane, n-heptane, dichloromethane and 1,2-dichloroethane. Correlation of ablation threshold values for solutions to photochemical reactivity of the...

  • Excimer-laser ablation of RuO2 observed by a streak camera. Fang, Xiaodong; Tachiki, Minoru // Journal of Applied Physics;2/15/1999, Vol. 85 Issue 4, p2402 

    Presents information on a study which investigated the propagation of oxygen and ruthenium atoms in vacuum and in an oxygen ambient in the laser ablation of ruthenium dioxide. Experimental details; Results and discussion; Conclusions.

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics