TITLE

Optical transmission systems employing vertical cavity surface emitting lasers and

AUTHOR(S)
Nichols, D.T.; Hobson, W.S.
PUB. DATE
December 1994
SOURCE
Applied Physics Letters;12/12/1994, Vol. 65 Issue 24, p3054
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Presents an optical fiber transmission system employing a vertical cavity surface emitting laser and an integrated p-i-n/metal semiconductor field effect transistor photoreceiver. Use of proton implantation for current confinement; Signal bandwidth of the device; Composition of the integrated photoreceiver circuit.
ACCESSION #
4241422

 

Related Articles

  • Monolithic integration of a vertical cavity surface emitting laser and a metal semiconductor.... Yang, Y.J.; Dziura, T.G.; Bardin, T.; Wang, S.C.; Fernandez, R.; Liao, Andrew S.H. // Applied Physics Letters;2/8/1993, Vol. 62 Issue 6, p600 

    Examines the monolithic integration of a vertical cavity surface emitting laser and a metal semiconductor field effect transistor. Effects of the conductive n-type substrate on optoelectronic integrated circuit (OEIC); Diagram of the OEIC structure; Fabrication process of the OEIC.

  • Monolithic optical transmitter circuit using the InGaP/GaAs material system. Nichols, D.T.; Lopata, J. // Applied Physics Letters;2/27/1995, Vol. 66 Issue 9, p1033 

    Investigates the integration of strained indium gallium phosphide (InGaP)/gallium arsenide (GaAs)/InGaAs multiquantum well laser with GaAs metal semiconductor field effect transistors. Formation of a transmitter circuit; Utilization of a single epitaxial growth step; Bandwidths for the...

  • Oxidized noble metal Schottky contacts to n-type ZnO. Allen, M. W.; Mendelsberg, R. J.; Reeves, R. J.; Durbin, S. M. // Applied Physics Letters;3/9/2009, Vol. 94 Issue 10, pN.PAG 

    Deliberately oxidized iridium, platinum, and palladium Schottky contacts were fabricated on the Zn-polar and O-polar faces of hydrothermal bulk ZnO by eclipse pulsed laser deposition in an oxygen ambient. The barrier heights of these oxidized contacts were significantly higher than their plain...

  • Low frequency noise of ZnO based metal-semiconductor field-effect transistors. Klüpfel, F. J.; von Wenckstern, H.; Grundman, M. // Applied Physics Letters;1/19/2015, Vol. 106 Issue 3, p1 

    The low frequency noise of metal-semiconductor field-effect transistors (MESFETs) based on ZnO:Mg thin films grown by pulsed laser deposition on a-plane sapphire was investigated. In order to distinguish between noise generation in the bulk channel material, at the semiconductor surface, and at...

  • Microrelations for Diagnostic Devices. Muravov, S.; Voronov, S.; Bogorosh, A.; Royzman, V.; Bubulis, A. // Electronics & Electrical Engineering;2008, Issue 88, p29 

    Modem receivers operating on the basis of photonic and Quantum effects, the structure and manufacture technologies of such receivers are rewiewed in the paper. Principle schemes of IR system appled in MEMS and integrated with clips explaited in the condition of acoustic emission and mechanical...

  • Network Coding Based Schemes for Imperfect Wireless Packet Retransmission Problems: A Divide and Conquer Approach. Gao, Zhenguo; Yang, Mei; Wang, Jianping; Nahrstedt, Klara; Cai, Shaobin; Li, Xiang; Wang, Huiqiang // Wireless Personal Communications;Feb2012, Vol. 62 Issue 4, p937 

    NC (Network Coding) provides a new approach to packet retransmission problems in wireless networks, which are named as WPRTPs (Wireless Packet Retransmission Problems) in this paper. Some research has been conducted on P-WPRTPs (Perfect WPRTPs) where, for one receiver, a packet is either being...

  • Omron Network Products optical subsystem supports HDMI, USB, Ethernet.  // Fiber Optics Weekly Update;12/7/2012, Vol. 32 Issue 49, p5 

    The article offers brief information on the SX51-02E transmitter and receiver modules from Omron Network Products LLC.

  • Isolating high-speed data interfaces. Kugelstadt, Thomas // Control Engineering;Dec2013, Vol. 60 Issue 12, pDE-1 

    The article discusses the low-voltage differential signalling (LVDS) and multi-point LVDS (M-LVDS) to ease the design task in choosing the right digital isolators. It mentions that typical LVDS uses include intra-circuit communication connections within a printed circuit board (PCB) and data...

  • A Novel Unconditionally Secure Oblivious Polynomial Evaluation Protocol. Vanishree, H.; George, Koshy // Proceedings of the International Workshop on Information Securit;2009, p450 

    Oblivious polynomial evaluation is a protocol involving two parties, a sender whose input is a polynomial P, and a receiver whose input is a value x. At the end of the protocol, the receiver learns P(x) and nothing more about P, while the sender remains oblivious of both x and P(x). It is used...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics