Low temperature magnetic force microscope utilizing a piezoresistive cantilever

Yuan, C.W.; Batalla, E.
September 1994
Applied Physics Letters;9/5/1994, Vol. 65 Issue 10, p1308
Academic Journal
Investigates the development of a low temperature magnetic force microscope using a piezoresistive cantilever. Uses of the non-contact frequency modulation technique; Operation of the instrument; Applications of the microscope.


Related Articles

  • Compact, piezo-driven, vacuum compatible rotation device. van der Wulp, H.; de With, E.; Pistecky, P.V.; Spronck, J.W. // Review of Scientific Instruments;Nov95, Vol. 66 Issue 11, p5339 

    Describes a vacuum compatible piezo-driven rotation device based on inertial sliding. Working principle; Performance of the device; Compact configuration; Suitability of the device for specimen rotation in the vacuum chamber of a transmission electron microscope.

  • Swapping bits improves performance of FPGA-PWM counter. Vanheesbeke, Stefaan // EDN Europe;Oct2007, Vol. 52 Issue 10, p62 

    The article discusses tips on improving the performance of field-programmable gate array (FPGA)-pulse-width modulation (PWM) counter. In rewiring modication, output frequency can also be lowered by connecting it to a prescaler where making the frequency fixed makes it easy to calculate. Listings...

  • Relays eliminate high-voltage noise. Jul-I Tsai; Woei-Wu Pai; Feng-Chang Hsu; Po-Jui Chen; Ching-Cheng Teng; Tai-Shan Liao // EDN Europe;Oct2007, Vol. 52 Issue 10, p64 

    The article discusses a practical approach in reducing high-voltage-induced noise. Acting as an antenna, the floating input of a scanning electron microscope has a high impedance which picks up noise signals. On the other hand, actuators also needs high-voltage signal to drive piezoelectric...

  • Scanning tunneling microscope with a rotary piezoelectric stepping motor. Yakimov, V. N. // Review of Scientific Instruments;Feb1996, Vol. 67 Issue 2, p384 

    Describes the development of a compact scanning tunneling microscope (STM) with a novel rotary piezoelectric stepping motor for coarse positioning. Inertial slip-stick positioners; STM design; Tip to sample approaching.

  • Shear force scanning near-field optical microscope based on a piezoelectric bimorph cantilever. Shang, G. Y.; Wang, C.; Wu, J.; Bai, C. L.; Lei, F. H. // Review of Scientific Instruments;May2001, Vol. 72 Issue 5, p2344 

    In this article we present a simple, nonoptical shear force detection scheme to control probe-sample distance for a scanning near-field optical microscope (SNOM). Shear force detection is realized by attaching a tapered optical fiber probe to a piezoelectric bimorph cantilever in which one piezo...

  • Direct measurement of oxygen in lead-based ceramics using the ζ-factor method in an analytical electron microscope. Gorzkowski, E. P.; Watanabe, M.; Scotch, A. M.; Chan, H. M.; Harmer, M. P. // Journal of Materials Science;Nov2004, Vol. 39 Issue 22, p6735 

    X-ray absorption of oxygen is significant in thin specimens of Pb(Mg1/3Nb2/3)O3-35 mol% PbTiO3 [PMN-35PT] due to the presence of heavy elements such as Pb and Nb. Therefore, direct measurement of the oxygen concentration in these types of systems can be difficult. Furthermore, assumption of the...

  • Piezoelectric bimorph-based scanner in the tip-scan mode for high speed atomic force microscope. Zhao, Jianyong; Gong, Weitao; Cai, Wei; Shang, Guangyi // Review of Scientific Instruments;Aug2013, Vol. 84 Issue 8, p083706 

    A piezoelectric bimorph-based scanner operating in tip-scan mode for high speed atomic force microscope (AFM) is first presented. The free end of the bimorph is used for fixing an AFM cantilever probe and the other one is mounted on the AFM head. The sample is placed on the top of a...

  • Compact design of a transmission electron microscope-scanning tunneling microscope holder with three-dimensional coarse motion. Svensson, K.; Jompol, Y.; Olin, H.; Olsson, F. // Review of Scientific Instruments;Nov2003, Vol. 74 Issue 11, p4945 

    A scanning tunneling microscope (STM) with a compact, three-dimensional, inertial slider design is presented. Inertial sliding of the STM tip, in three dimensions, enables coarse motion and scanning using only one piezoelectric tube. Using the same electronics both for scanning and inertial...

  • Inkjet printed electronics using copper nanoparticle ink. Jin Sung Kang; Hak Sung Kim; Jongeun Ryu; Hahn, H. Thomas; Seonhee Jang; Jae Woo Joung // Journal of Materials Science: Materials in Electronics;Nov2010, Vol. 21 Issue 11, p1213 

    Inkjet printing of electrode using copper nanoparticle ink is presented. Electrode was printed on a flexible glass epoxy composite substrate using drop on demand piezoelectric dispenser and was sintered at 200 °C of low temperature in N gas condition. The printed electrodes were made with...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics