Synthesis of (BiPb)[sub 2]Sr[sub 2]Ca[sub 2]Cu[sub 3]O[sub 10] superconducting thin films on MgO

Sajjadi, Amin; Boyd, Ian W.
December 1993
Applied Physics Letters;12/13/1993, Vol. 63 Issue 24, p3373
Academic Journal
Examines the synthesis of (BiPb)[sub 2]Sr[sub 2]Ca[sub 2]Cu[sub 3]O[sub 10] superconducting films on magnesium oxide substrate using multilayered pulse laser deposition method. Use of lead oxide target to dope lead into the films; Effect of post-annealing temperature on phase formation; Use of x-ray diffraction technique for c-axis orientation of the films.


Related Articles

  • Pulsed laser deposition of oriented In[sub 2]O[sub 3] on (001) InAs, MgO, and yttria-stabilized.... Tarsa, E.J.; English, J.H.; Speck, J.S. // Applied Physics Letters;5/10/1993, Vol. 62 Issue 19, p2332 

    Investigates the growth of oriented In[sub 2]O[sub 3] films on indium arsenide, magnesium oxide and yttria-stabilized zirconia substrate using pulsed laser deposition. Use of in situ reflection high energy electron diffraction and x-ray diffraction analysis; Resistivity and Hall mobility of the...

  • High quality crystalline ZnO buffer layers on sapphire (001) by pulsed laser deposition for.... Vispute, R.D.; Talyansky, V. // Applied Physics Letters;5/19/1997, Vol. 70 Issue 20, p2735 

    Examines the growth of zinc oxide films with high crystalline and optical quality on sapphire by pulsed laser deposition. Characteristics of the films deposited under optimized growth conditions; Information on the energy gap and optical transparency in the visible region; Crystalline...

  • Laser-deposited PrGaO[sub 3] films on SrTiO[sub 3] substrates and in.... Brorsson, G.; Nilsson, P.A. // Applied Physics Letters;7/27/1992, Vol. 61 Issue 4, p486 

    Examines the growth of PrGaO[sub 3] films by laser deposition. Observation of several distinct layers; Resistivity of the layers; Occurrence of orthogonal in-plane orientations.

  • Nature of in situ superconducting film formation. Ying, Q. Y.; Kim, H. S.; Shaw, D. T.; Kwok, H. S. // Applied Physics Letters;9/4/1989, Vol. 55 Issue 10, p1041 

    The resistivity of a Y-Ba-Cu-O film was monitored during laser deposition in real time. Both deposition parameters leading to in situ films and those requiring high-temperature (850 °C) post-annealing were examined. It was found that in both cases, the resistivity was dependent on the oxygen...

  • Plasma plume characteristics and properties of pulsed laser deposited diamond-like carbon films. Haverkamp, J.; Mayo, R. M.; Bourham, M. A.; Narayan, J.; Jin, C.; Duscher, G. // Journal of Applied Physics;3/15/2003, Vol. 93 Issue 6, p3627 

    Pulsed laser deposition is a unique technique for the deposition of hydrogen-free diamond-like carbon films. During deposition, amorphous carbon is evaporated from a solid target by a high-energy KrF laser, ionized, and ejected as a plasma plume. The plume expands outwards and deposits the...

  • Nature of the pulsed laser process for the deposition of high Tc superconducting thin films. Venkatesan, T.; Wu, X. D.; Inam, A.; Jeon, Y.; Croft, M.; Chase, E. W.; Chang, C. C.; Wachtman, J. B.; Odom, R. W.; di Brozolo, F. Radicati; Magee, C. A. // Applied Physics Letters;10/10/1988, Vol. 53 Issue 15, p1431 

    The pulsed laser thin-film deposition process can enable preparation of thin films of complex composition with good control over the film stoichiometry. The film compositions are similar to that of the target pellet and as a consequence this technique appears to be an ideal method for preparing...

  • Growth of epitaxial Al[sub x]Ga[sub 1-x]N films by pulsed laser deposition. Huang, Tzu-fang; Harris, James S. // Applied Physics Letters;3/9/1998, Vol. 72 Issue 10 

    Epitaxial Al[sub x]Ga[sub 1-x]N films have been grown on c-cut sapphire substrates at 800 °C and 10[sup -2] Torr N[sub 2] by pulsed laser deposition (PLD) using a KrF laser. Throughout the composition range from x=0 to 0.6, the films show epitaxial patterns in reflection high-energy electron...

  • Characterization of Y-Ba-Cu-O thin films and yttria-stabilized zirconia intermediate layers on.... Reade, R.P.; Mao, X.L.; Russo, R.E. // Applied Physics Letters;8/5/1991, Vol. 59 Issue 6, p739 

    Investigates the use of an intermediate layer for the growth of yttrium barium copper oxide (YBCO) thin films on polycrystalline metallic alloys for tape conductor applications. Development of pulsed laser deposition process; Application of different growth conditions; Deposition of YBCO thin...

  • Investigation of dead-layer thickness in SrRuO[sub 3]/Ba[sub 0.5]Sr[sub 0.5]TiO[sub 3]/Au thin-film capacitors. Sinnamon, L. J.; Bowman, R. M.; Gregg, J. M. // Applied Physics Letters;3/19/2001, Vol. 78 Issue 12, p1724 

    Thin-film capacitors, with barium strontium titanate (BST) dielectric layers between 7.5 and 950 nm in thickness, were fabricated by pulsed-laser deposition. Both crystallography and cation chemistry were consistent with successful growth of the BST perovskite. At room temperature, all...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics