Tracer diffusion of [sup 110]Ag in Bi[sub 2]Sr[sub 2]CaCu[sub 2]O[sub x]

Fang, Y.; Danyluk, S.
May 1992
Applied Physics Letters;5/4/1992, Vol. 60 Issue 18, p2291
Academic Journal
Examines the tracer diffusion of [sup 110]Ag in dense. Measurement of the polycrystalline Bi[sub 2]Sr[sub 2]CaCu[sub 2]O[sub x] at different temperatures at an oxygen pressures; Analysis of the types of penetration curves; Identification of the substantial diffusivity of silver during normal heat treatment.


Related Articles

  • Effect of Structure on the Damping Capacity and Mechanical Properties of Iron Alloys with Magnetomechanical Damping. Skvortsov, A. I. // Metal Science & Heat Treatment;May/Jun2004, Vol. 46 Issue 5/6, p196 

    The effect of the size of grains and magnetic domains on the damping capacity primarily determined by magnetomechanical damping is considered for iron alloys with the ferrite structure. The indeterminacy of the value of magnetomechanical damping in a single crystal and in large-grain...

  • Microstructure evolution of CuZr polycrystals processed by high-pressure torsion. Dopita, Milan; Janeček, Miloš; Kužel, Radomír; Seifert, Hans Jürgen; Dobatkin, Sergey // Journal of Materials Science;Sep2010, Vol. 45 Issue 17, p4631 

    The microstructure evolution of extruded Cu–0.18 wt% Zr polycrystals processed by high-pressure torsion (HPT) at room temperature at the pressure of 4 GPa and the different number of the HPT revolutions (i.e. different strain) was investigated using the combination of the electron...

  • Stress-induced morphology and fine-line stability enhancement of NiSi on poly-SiGe with a buffer polycrystalline silicon interlayer. Chi-Chang Wu; Wen-Fa Wu; Fu-Hsiang Ko; Hsin-Chiang You; Wen-Luh Yang // Applied Physics Letters;5/5/2008, Vol. 92 Issue 18, p182106 

    The thermal and morphological stability of NiSi is enhanced by inserting a polycrystalline (poly-Si) buffer layer between the Ni and poly-SiGe films. NiSi films formed on poly-Si/poly-SiGe stack layers possessed continuous, smooth structures after annealing at 500–850 °C. Moreover,...

  • Tracer diffusion of Ag in Bi[sub 2]Sr[sub 2]Ca[sub n-1]Cu[sub n]O[sub 2n+4]. Fang, Y.; Routbort, J.L. // Journal of Applied Physics;1/1/1994, Vol. 75 Issue 1, p210 

    Tracer diffusion of Ag in the c direction of single crystal Bi2Sr2CaCu2Ox (2212), and in dense polycrystalline Bi2Sr2CuOx (2201) and (Bi,Pb)2Sr2Ca2Cu3Ox (2223) has been investigated. Concentration profiles were measured by secondary-ion mass spectrometry and by a radiotracer serial-sectioning...

  • Glass-ceramics: Their production from wastes–A Review. Rawlings, R. D.; Wu, J. P.; Boccaccini, A. R. // Journal of Materials Science;Feb2006, Vol. 41 Issue 3, p733 

    Glass-ceramics are polycrystalline materials of fine microstructure that are produced by the controlled crystallisation (devitrification) of a glass. Numerous silicate based wastes, such as coal combustion ash, slag from steel production, fly ash and filter dusts from waste incinerators, mud...

  • The Effect of Cooling Rate from Solution on the Lattice Misfit During Isothermal Aging of a Ni-Base Superalloy. Connor, L.; Stone, H.; Collins, D.; Preuss, M.; Hardy, M.; Rae, C. // Metallurgical & Materials Transactions. Part A;May2014, Vol. 45 Issue 5, p2436 

    The evolution of lattice misfit in the polycrystalline nickel-base superalloy, RR1000, has been investigated using high resolution neutron diffraction at interrupted time intervals during an aging heat treatment. Samples were subjected to a super-solvus heat treatment followed by either a 100 or...

  • Structure and electrical conductivity of selenium-ion-implanted CdSe films. Georgobiani, A. N.; Levonovich, B. N.; Avetisov, I. Kh. // Inorganic Materials;Jun2010, Vol. 46 Issue 6, p598 

    We have studied the effect of annealing on the spectral and photoelectric properties of polycrystalline CdSe films produced by thermal evaporation and implanted with Se ions to doses from 5 × 1015 to 5 × 1016 cm−2. The results demonstrate that, when cadmium vacancies and selenium...

  • Effects of microstructure and environment on room-temperature tensile properties of B2-type polycrystalline CoTi intermetallic compound. Kaneno, Yasuyuki; Takasugi, Takayuki // Journal of Materials Science;Mar2003, Vol. 38 Issue 5, p869 

    Room-temperature tensile property and fracture mode of B2-type polycrystalline CoTi intermetallic compound was studied as functions of microstructure and environment. Using a hot-rolled CoTi sheet, various microstructures were prepared by different heat treatments and pre-straining. Tensile...

  • Effect of Substitution and Heat Treatment Route on Polycrystalline FeSeTe Superconductors. Hacisalihoglu, M.; Yanmaz, E. // Journal of Superconductivity & Novel Magnetism;Jul2013, Vol. 26 Issue 7, p2369 

    The effect of atomic substitution of Te in iron based superconductors FeSe (1:1 type), which exhibits the simplest crystal structure among the iron-based superconductors, has been investigated in terms of structural, electronic transport, and magnetic properties. Polycrystalline samples with...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics