TITLE

Mechanically alloyed and gas-phase carbonated highly coercive Sm[sub 2]Fe[sub 17]C[sub x]

AUTHOR(S)
Kuhrt, C.; Katter, M.
PUB. DATE
April 1992
SOURCE
Applied Physics Letters;4/20/1992, Vol. 60 Issue 16, p2029
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the microcrystalline Sm[sub 2]Fe[sub 17]C[sub x] powders with high carbon content. Preparation of the microcrystalline powders by mechanical alloying; Magnetic properties of the Sm[sub 2]Fe[sub 17]C[sub x] powder; Ways to magnetically harden the interstitial Sm[sub 2]Fe[sub 17]C[sub x] phase.
ACCESSION #
4241200

 

Related Articles

  • Mechanical alloying process of Fe-Cr powders studied by magnetic measurements. Koyano, T.; Takizawa, T.; Fukunaga, T.; Mizutani, U.; Kamizuru, S.; Kita, E.; Tasaki, A. // Journal of Applied Physics;1/1/1993, Vol. 73 Issue 1, p429 

    Provides information on a study that analyzed the mechanical alloying process for a mixture of elemental iron and chromium powders on the basis of the data on magnetic properties and iron M ö ssbauer spectroscopy. Details on the experimental procedure; Results and discussion; Conclusion.

  • Mechanical properties of submicron-grained TiAl alloys prepared by mechanical alloying. Oehring, M.; Appel, F. // Applied Physics Letters;2/20/1995, Vol. 66 Issue 8, p941 

    Examines the mechanical alloying preparation of TiAl powders with grain size of 15 nanometer by hot isotonic pressing. Exhibition of the material globular microstructure; Observation of Hall Petch type dependence on grain size of microhardness measurements; Decrease ductility at room...

  • Structure and magnetic properties of Sm[sub x]Co[sub 5]/α-Fe (x=0.65-1.3) prepared by mechanical milling and subsequent annealing. Zhang, Jian; Zhang, Shao-ying; Zhang, Hong-wei; Shen, Bao-gen; Li, Bao-he // Journal of Applied Physics;3/1/2001, Vol. 89 Issue 5, p2857 

    Powder mixtures of Sm[sub x]Co[sub 5] (x=0.65-1.3)+20 wt % α-Fe were mechanically milled. Annealing these as-milled powders results in the formation of a mixture of the hard phase Sm-(Co, Fe) and the soft phase Fe-Co. For the as-milled Sm[sub 1]Co[sub 5]+20 wt % α-Fe powder, the hard phase...

  • Nitrogen-induced amorphization of Ti-Zr powders during mechanical alloying. Aoki, K.; Memezawa, A. // Applied Physics Letters;8/31/1992, Vol. 61 Issue 9, p1037 

    Demonstrates the nitrogen-induced amorphization of titanium-zirconium powders during mechanical alloying. Characterization of the products by transmission electron microscopy and differential scanning calorimetry; Comparison between crystalline-TiZrN[sub 0.9] and amorphous-TiZrN[sib 0.3] alloy...

  • Formation of gallium nitride by a novel hot mechanical alloying process. Millet, P.; Calka, A. // Applied Physics Letters;11/1/1993, Vol. 63 Issue 18, p2505 

    Reports the first formation of gallium nitride powder by a hot mechanical alloying process. Study on the structural changes resulting from milling; Analysis on the elemental composition of as-milled product; Manifestation of the nanostructural phase; Demonstration of gallium nitride formation.

  • Study of permanent magnetic properties of the 1-12 nitrides with Nd and Pr. Yang, Ying-Chang; Pan, Qi; Cheng, Ben-Pai; Zhang, Xiao-Dong; Liu, Zun-Xiao; Sun, Yun-Xi; Ge, Sen-Ling // Journal of Applied Physics;11/15/1994, Vol. 76 Issue 10, p6725 

    Focuses on a study which investigated the permanent magnetic properties of isotropic and anisotropic powders of R(Fe,Mo)[sub12]N[subx] compounds. Sample preparation; Use of mechanical alloying and a conventional milling process; Results and discussion.

  • Carbon microspheres produced by high energy ball milling of graphite powder. Li, J. L.; Wang, L. J.; Jiang, W. // Applied Physics A: Materials Science & Processing;Jun2006, Vol. 83 Issue 3, p385 

    During high energy ball milling of graphite powder, carbon microspheres were produced from necklace-like carbon structures that were gradually peeled off and finally fractured into particles. The current formation process of carbon microspheres is completely different to those reported...

  • Magnetic Properties of Mechanically Alloyed and Annealed Powders Fe100 — XCX (X = 5 and 15 at.%). Ul'yanov, A. I.; Elsukov, E. P.; Zagainov, A. V.; Arsent'eva, N. B.; Dorofeev, G. A.; Fomin, V. M. // Russian Journal of Nondestructive Testing;Sep2003, Vol. 39 Issue 9, p683 

    The effect of the structural state and the phase composition on the magnetic hysteresis properties of Fe(95)C(5) and Fe(85)C(15) powders after mechanical alloying and annealing is investigated. It is shown that in the initial stage of grinding in a ball planetary mill the coercive force of the...

  • Al—Ti powder produced through mechanical alloying for different times. Cuevas, F. G.; Cintas, J.; Montes, J. M.; Gallardo, J. M. // Journal of Materials Science;Dec2006, Vol. 41 Issue 24, p8339 

    A powder mixture of aluminum, 10 wt% titanium, and 1.5 wt% of a wax acting as process control agent (PCA), has been attrition-milled for 2–20 h. Titanium powder had been previously ground to a lower particle size to make it similar to the as-received aluminum particle size. The overall...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics