Mechanical alloying process of the zirconia-8 mol % yttria ceramic powder

Chen, Y.L.; Qi, M.
July 1994
Applied Physics Letters;7/18/1994, Vol. 65 Issue 3, p303
Academic Journal
Examines the mechanical alloying process of zirconia and yttria ceramic powders containing eight mole percent yttria. Use of the x-ray diffraction technique; Transformation of monoclinic zirconia into tetragonal zirconia solid solution; Formation of single cubic zirconia after prolonged milling.


Related Articles

  • Structural properties of high energy mechanical milled Ca-Zr doped BaTiO3:Ca0.1Ba0.9Zr0.1Ti0.9O3. Tanna, Ashish R.; Joshi, H. H. // AIP Conference Proceedings;Jun2013, Vol. 1536 Issue 1, p827 

    The perovskite Ca0.1Ba0.9Zr0.1Ti0.9O3 (abbreviated as CBZT) material was synthesized by solid state reaction. The ceramic powder of CBZT sample was milled in a planetary ball mill for different hours (12 hrs, 18 hrs and 30 hrs). The powder X-ray Diffractograms of all the CBZT samples show single...

  • Mechanically alloyed nanocomposite magnets. Gong, Wei; Hadjipanayis, G. C.; Krause, R. F. // Journal of Applied Physics;5/15/1994, Vol. 75 Issue 10, p6649 

    Presents a study that investigated the magnetic and structural properties of mechanically alloyed Nd[sub2]Fe[sub14]B+ (Fe,FeCo) powders over a wide range of temperatures. Measurement of the magnetic properties of the powders; Background on mechanical alloying; Composition of powders after x-ray...

  • Formation of amorphous Ge-S semiconductor alloys by mechanical alloying. Shen, T.D.; Wang, K.Y. // Applied Physics Letters;9/20/1993, Vol. 63 Issue 12, p1637 

    Examines the formation of amorphous germanium-sulphur (Ge-S) semiconductor alloys by ball milling of powder mixtures of elemental Ge and S. Investigation of amorphization process and ball-milled products using x-ray diffraction; Execution of mechanical alloying; Preparation of amorphous...

  • M�ssbauer characterization of Fe-doped ZnO prepared by mechanical milling. Baum, L.; Meyer, M.; Richard, D.; Damonte, L. C.; Mendoza-Z�lis, L. // Hyperfine Interactions;2007, Vol. 176 Issue 1-3, p87 

    The preparation of massive oxides Zn1 - x Fe x O by means of mechanical milling in diverse gaseous atmospheres and starting with different powder mixtures was investigated. ZnO powder with 10 at.% admixture of Fe, FeO or Fe2O3, were milled during 1, 4 or 16 h and characterized by X-ray...

  • Formation of amorphous Zr-Al-Cu-Ni with a large supercooled liquid region by mechanical alloying. Seidel, M.; Eckert, J.; Schultz, L. // Journal of Applied Physics;5/15/1995, Vol. 77 Issue 10, p5446 

    Examines the formation of amorphous zirconium-aluminum-copper-nickel with large supercooled liquid region by mechanical alloying. Use of mechanical alloying from crystalline elemental powders in preparing amorphous powder; Characterization of the powders by x-ray diffraction and differential...

  • De-mixing of Nd[sub 2]Fe[sub 14]B during mechanical milling. Alonso, T.; Yang, H. // Applied Physics Letters;2/17/1992, Vol. 60 Issue 7, p833 

    Investigates the effect of mechanical milling on Nd[sub 2]Fe[sub 14]B intermetallic structure using x-ray diffraction and electron microscopy. Decomposition of Nd[sub 2]Fe[sub 14]B phase during mechanical milling; Examination on the as-milled powder by transmission electron microscopy;...

  • The Transition from Paramagnetic to Ferromagnetic States as Influenced by Evolving Microstructure of NiZnFeO. Ismail, Ismayadi; Hashim, Mansor; Matori, Khamirul; Alias, Rosidah; Hassan, Jumiah // Journal of Superconductivity & Novel Magnetism;Jan2012, Vol. 25 Issue 1, p71 

    In this paper the effect of sintering temperature on NiZnFeO is examined closely. The evolution of toward magnetically ordered materials was to be tracked with the parallel evolving microstructure subjected to sintering temperatures in an ascending order. The starting powder of NiZnFeO was...

  • Synthesis and characterization of Fe3AlC0.5 by mechanical alloying. Mercado, W. Barona; Fajardo, M.; Alcázar, G. A. Pérez; Sthepa, H. Sánchez // Hyperfine Interactions;2006, Vol. 168 Issue 1-3, p943 

    Double iron and aluminum carbides were prepared by mechanical alloying from elemental powders, with a ball-to-powder weight ratio 20:1. The samples were milled for 1, 3, 5, 10, 15, 20 and 25 h. The alloy progress for each milling time was evaluated by X-ray diffraction (XRD) and 57Fe...

  • The mixing of iron and cobalt during mechanical alloying. Brüning, R.; Samwer, K.; Kuhrt, C.; Schultz, L. // Journal of Applied Physics;10/1/1992, Vol. 72 Issue 7, p2978 

    Presents a study which investigated the interdiffusion of FeCo during mechanical alloying. Characteristics of mechanical alloying; Experimental techniques and data analysis; Values of the magnetic hyperfine field; Result of the x-ray diffraction for FeCo; Description of the Mössbauer spectra...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics