TITLE

YBa[sub 2]Cu[sub 3]O[sub 7-delta] Josephson junctions on directionally ion beam etched MgO

AUTHOR(S)
Ramos, J.; Ivanov, Z.G.
PUB. DATE
October 1993
SOURCE
Applied Physics Letters;10/11/1993, Vol. 63 Issue 15, p2141
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Fabricates YBa[sub 2]Cu[sub 3]O[sub 7-delta] Josephson junctions on ion beam etched magnesium oxide substrates. Control of junction parameters by step height variation; Comparison of the noise measurements between shallow and deeper step junctions; Advantage of the fabrication method used.
ACCESSION #
4240861

 

Related Articles

  • Fabrication and properties of Nb/Al, Alox/Nb Josephson tunnel junctions with a double-oxide barrier. Houwman, E. P.; Veldhuis, D.; Flokstra, J.; Rogalla, H. // Journal of Applied Physics;2/15/1990, Vol. 67 Issue 4, p1992 

    Presents a study that investigated the dependence of critical current junctions of single oxide barrier on the oxygen pressure and oxidation temperature in a Josephson tunnel junction. Details of the fabrication process of the Josephson tunnel junction; Influence of oxygen during thermal...

  • Self-aligned contact process for Nb/Al-AlOx/Nb Josephson junctions. Morohashi, Shin’ichi; Hasuo, Shinya; Yamaoka, Toyoshi // Applied Physics Letters;1/20/1986, Vol. 48 Issue 3, p254 

    High quality Nb/Al-AlOx/Nb Josephson junctions have been fabricated by a novel process named the self-aligned contact process. After the definition of the junction area by a reactive ion etching (RIE) technique, the exposed Nb layer and the junction edge are anodized to protect against...

  • Vortex structure and cavity modes in stacked double Nb/AlOx/Nb Josephson junctions. Song, S. N.; Maglic, S.; Thomas, C. D.; Ulmer, M.; Ketterson, J. B. // Journal of Applied Physics;9/1/1996, Vol. 80 Issue 5, p2949 

    Presents a study which examined the static I-V characteristics and cavity modes in stacked double niobium/aluminum oxide[subx]/niobium Josephson junctions. Experimental procedure; Results and discussion; Conclusion.

  • Single intrinsic Josephson junction with double-sided fabrication technique. You, L. X.; Torstensson, M.; Yurgens, A.; Winkler, D.; Lin, C. T.; Liang, B. // Applied Physics Letters;5/29/2006, Vol. 88 Issue 22, p222501 

    We make stacks of intrinsic Josephson junctions (IJJs) embedded in the bulk of very thin (d≤=100 nm) Bi2Sr2CaCu2O8+x single crystals. By precisely controlling the etching depth during the double-sided fabrication process, the stacks can be reproducibly tailor-made to be of any microscopic...

  • Evaluation of AlOx barrier thickness in Nb Josephson junctions using anodization profiles. Imamura, Takeshi; Hasuo, Shinya // Applied Physics Letters;12/11/1989, Vol. 55 Issue 24, p2550 

    Using anodization profiles, we have analyzed the thin AlOx-Al tunneling barrier in a Nb/AlOx-Al/Nb Josephson junction. We measured the voltage width at the AlOx-Al barrier in the profiles and found that it is closely related to the AlOx-Al thickness. We proposed a way to evaluate this thickness...

  • Nb/yttria-stabilized-zirconia/Nb nonhysteretic Josephson junctions. Lam, S. K. H.; Gnanarajan, S. // Applied Physics Letters;7/28/2003, Vol. 83 Issue 4, p716 

    Yttria-stabilized zirconia (YSZ) is used as an insulating barrier for the fabrication of niobium edge junctions. Using the ion beam assisted deposition technique, Nb/YSZ/Nb edge junctions with YSZ thin film of a few nanometers in thickness have been fabricated. The junctions are nonhysteretic...

  • Impurity effects in rf O2 plasma oxidation for Pb-alloy Josephson junctions. Nakano, Junichi; Wada, Masato // Journal of Applied Physics;3/1/1986, Vol. 59 Issue 5, p1696 

    Discusses the impurity-gas effects on the electrical properties of lead-indium alloy Josephson junctions fabricated by radio frequency plasma oxidation. Relationships between electrical properties and oxidation conditions; Techniques used to analyze impurity gases; Changes in junction...

  • Ion milling damage and regrowth of oxide substrates studied by ion channeling and atomic force.... Takeuchi, I.; Sharma, R.P. // Applied Physics Letters;6/9/1997, Vol. 70 Issue 23, p3098 

    Examines the effect of ion milling on the surface crystallinity of metal oxides substrates used for fabricating high temperature Josephson junctions and circuits. Use of LaAlO[sub 3], SrTiO[sub 3] and NdGaO[sub 3] substrates; Damage-induced peak corresponding to a surface disordered layer;...

  • YBa[sub 2]Cu[sub 3]O[sub 7] thin-film step junctions on MgO substrates. Edwards, J.A.; Satchell, J.S. // Applied Physics Letters;5/11/1992, Vol. 60 Issue 19, p2433 

    Examines the creation of Josephson junctions by YBa[sub 2]Cu[sub 3]O[sub 7] thin-film evaporation on manganese oxide substrates. Comparison of Josephson junctions with junctions grown on perovskite substrates; Determination of the current temperature; Fabrication of direct current...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics