TITLE

Frequency and power stabilization of a three longitudinal mode He-Ne laser using secondary beat

AUTHOR(S)
Suh, H.S.; Yoon, T.H.
PUB. DATE
October 1993
SOURCE
Applied Physics Letters;10/11/1993, Vol. 63 Issue 15, p2027
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the frequency and power stabilization of helium-neon (He-Ne) laser using secondary beat frequency. Detection of the secondary beat signal on silicon-p-i-n photodiode; Observation of the beat frequency between lasers; Application of the stabilized laser for multiaxial interferometer.
ACCESSION #
4240822

 

Related Articles

  • Frequency stabilization and control of a mode-locked dye laser. Kruger, E. // Review of Scientific Instruments;Oct95, Vol. 66 Issue 10, p4806 

    Examines the frequency stabilization and control of a mode-locked laser. Locking of one of the modes to a transmission maximum of a reference Fabry-Perot interferometer; Effects of the insertion of an appropriate loop filter; Introduction of a special ramp automatic reset function to avoid...

  • Dimensional Stability of Hexoloy SA® Silicon Carbide and Zerodurâ„¢ Materials for the LISA Mission. Preston, Alix; Cruz, Rachel J.; Thorpe, J. Ira; Mueller, Guido; Boothe, G. Trask; Delgadillo, Rodrigo; Guntaka, Sridhar R. // AIP Conference Proceedings;2006, Vol. 873 Issue 1, p369 

    In the LISA mission, incoming gravitational waves will modulate the distance between proof masses while laser beams monitor the optical path length changes with 20 pm/[formula] accuracy. Optical path length changes between bench components or the relative motion between the primary and secondary...

  • Measurement of the frequency modulation transfer function of a laser using a Mach-Zehnder interferometer. McRae, T.; Field, B.; Manson, P. // Applied Physics B: Lasers & Optics;Jun2005 Part 1, Vol. 80 Issue 7, p849 

    A technique is presented for determining the frequency modulation transfer function of a laser. The method is based on a Mach-Zehnder interferometer, with a significant difference in the optical path lengths of the two arms. A frequency-modulated laser beam incident on the interferometer...

  • Laser Frequency Stabilization by Using Arm-Locking. Schulte, Hans Reiner; Gath, Peter F.; Herz, Markus // AIP Conference Proceedings;2006, Vol. 873 Issue 1, p379 

    In order to achieve the required measurement performance on LISA, the laser frequency must be stabilized to approximately [formula] in the LISA measurement bandwidth from 0.03 mHz up to 1 Hz for the master laser in the constellation. All other lasers are offset locked to the master laser such...

  • Frequency stabilization to 6 × 10?16 via spectral-hole burning. Thorpe, Michael J.; Rippe, Lars; Fortier, Tara M.; Kirchner, Matthew S.; Rosenband, Till // Nature Photonics;Nov2011, Vol. 5 Issue 11, p688 

    We demonstrate two-stage laser stabilization based on a combination of Fabry-Pérot and spectral-hole burning techniques. The laser is first pre-stabilized by the Fabry-Pérot cavity to a fractional-frequency stability of ?y(?) < 1 × 10?13. A pattern of multiple spectral holes written in...

  • A laser-lock concept to reach cms-1-precision in Doppler experiments with Fabry-Pérot wavelength calibrators. Reiners, A.; Banyal, R. K.; Ulbrich, R. G. // Astronomy & Astrophysics / Astronomie et Astrophysique;Sep2014, Vol. 569, p1 

    State-of-the-art Doppler experiments require wavelength calibration with precision at the cms-1 level. A low-finesse Fabry-Pérot interferometer (FPI) can provide a wavelength comb with a very large bandwidth as required for astronomical experiments, but unavoidable spectral drifts are...

  • Long-term laser frequency stabilization using fiber interferometers. Jia Kong; Lucivero, Vito Giovanni; Jiménez-Martínez, Ricardo; Mitchell, Morgan W. // Review of Scientific Instruments;Jul2015, Vol. 86 Issue 7, p1 

    We report long-term laser frequency stabilization using only the target laser and a pair of 5 m fiber interferometers, one as a frequency reference and the second as a sensitive thermometer to stabilize the frequency reference. When used to stabilize a distributed feedback laser at 795 nm, the...

  • Frequency stabilization of an internal-mirror He-Ne laser using axial-mode beat. Sasaki, A.; Okada, T. // Applied Physics Letters;9/7/1992, Vol. 61 Issue 10, p1151 

    Presents the frequency stabilization of an internal-mirror He-Ne laser using the axial-mode beat frequency. Detection of the frequency by a silicone avalanche photodiode; Achievement of 2.2. MHz frequency stability; Amplitude stability of the stabilized laser.

  • Stable single-frequency operation of a high-power external cavity tapered diode laser at 780 nm. Goyal, A.K.; Gavrilovic, P. // Applied Physics Letters;9/8/1997, Vol. 71 Issue 10, p1296 

    Examines the frequency stability in tapered diode laser oscillation on an external cavity mode at high power. Use of an intercavity etalon to gain frequency stability and side-mode discrimination; Application of current range measurement for tunable single-frequency emission; Utilization in...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics