TITLE

Hard x-ray phase zone plate fabricated by lithographic techniques

AUTHOR(S)
Lai, B.; Yun, W.B.
PUB. DATE
October 1992
SOURCE
Applied Physics Letters;10/19/1992, Vol. 61 Issue 16, p1877
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the fabrication of Fresnel phase zone plate by x-ray lithographic technique. Derivation of spatial resolution in the micrometer range; Dominance of geometric demagnification of the source; Application of zeroth-order x-ray to the focusing device.
ACCESSION #
4240743

 

Related Articles

  • Toward high resolution and high efficiency Zone Plate for X-ray applications. Di Fabrizio, Enzo; Romanato, Filippo; Gentili, Massimo // AIP Conference Proceedings;2000, Vol. 507 Issue 1, p635 

    High resolution and high efficiency Zone Plate for X-rays in the energy range of 300 eV and 12 KeV fabricated by means of electron beam and X-ray lithography are presented. Regarding the high resolution issue gold zone plate with 70 nm resolution and thickness of 0.4 μm are shown. When the...

  • Using E-Beam and X-Ray Lithography Techniques to Fabricate Zone Plates for Hard X-ray. Lo, T. N.; Chen, Y. T.; Liu, C. J.; Chang, W. D.; Lai, T. Y.; Wu, H. J.; Lin, I. K.; Su, C. I.; Shew, B. Y.; Je, J. H.; Margaritondo, G.; Hwu, Y. // AIP Conference Proceedings;2007, Vol. 879 Issue 1, p1466 

    A high-resolution zone plate for focusing and magnifying hard-x-rays require very high fabrication precision and high aspect ratio metal structures and therefore post perhaps the most challenging task to the nanofabrication. We present a nanofabrication strategy to fabricate such devices for...

  • Astigmatism correction in x-ray scanning photoemission microscope with use of elliptical zone plate. Ade, H.; Ko, C.-H. // Applied Physics Letters;3/2/1992, Vol. 60 Issue 9, p1040 

    Examines the impact of an elliptical, high resolution zone plate on the performance of an initially astigmatic soft x-ray scanning photoemission microscope. Improvement in spatial resolution; Domination of source size and chromatic aberrations in the resolution; Possibility of a future gain in...

  • Fabrication of multilayer Laue lenses by a combination of pulsed laser deposition and focused ion beam. Liese, Tobias; Radisch, Volker; Krebs, Hans-Ulrich // Review of Scientific Instruments;Jul2010, Vol. 81 Issue 7, p073710 

    X-ray diffractive techniques using Fresnel zone plate lenses of various forms are of great technical interest because of their ability to form images at very high spatial resolution, but the zone plates are unfortunately very hard to produce by lithography. Alternatively, multilayer Laue lenses...

  • Depth-graded multilayers for application in transmission geometry as linear zone plates. Chian Liu; Conley, R.; Macrander, A. T.; Maser, J.; Kang, H. C.; Zurbuchen, M. A.; Stephenson, G. B. // Journal of Applied Physics;12/1/2005, Vol. 98 Issue 11, p113519 

    Fresnel zone plates for x-ray focusing optics are typically made using lithographic techniques. To achieve optimum efficiency for hard x rays, a depth of several microns is required, which limits the minimum zone width and hence minimum focal spot size achievable using lithography. We are...

  • 1 nm x-ray lithography using novel mask fabrication technique. Berry, G.J.; Cairns, J.A.; Davidson, M.R.; Rodley, D.R.G.; Thompson, J.; Turcu, I.C.E.; Shaikh, W. // Review of Scientific Instruments;Sep98, Vol. 69 Issue 9, p3350 

    Examines the use of mask fabrication in 1 nm x-ray lithography. Manufacture of high-resolution commercial photomasks and x-ray masks through etching; Dependence of the resolution on electron scattering and electron beam diameter; Production of gold features on silicon nitride membrane by...

  • Zone plate focused soft X-ray lithography. Leontowich, Adam; Hitchcock, Adam // Applied Physics A: Materials Science & Processing;Apr2011, Vol. 103 Issue 1, p1 

    The zone plate focused soft X-rays of a scanning transmission X-ray microscope have been used to pattern poly(methyl methacrylate) and poly(dimethylglutarimide) films by a direct write method which is analogous to lithography with a focused electron beam. The lithographic characteristics of both...

  • High-resolution X-ray Microdiffraction System for Characterization of Selectively Grown Layers using a Zone Plate Combined with a Narrow Slit. Kimura, Shigeru; Kagoshima, Yasushi; Koyama, Takahisa; Wada, Izumi; Niimi, Toshihiro; Tsusaka, Yoshiyuki; Matsui, Junji; Izumi, Koich; Warwick, T. // AIP Conference Proceedings;2004, Vol. 705 Issue 1, p1275 

    We have developed a high-resolution x-ray microdiffraction system at the BL24XU of the SPring-8. This system uses a focused beam produced by using a zone plate combined with a narrow slit. The size of the focused beam is 0.32 μm vertically and 1.3 μm horizontally and the angular divergence...

  • Zernike-type phase contrast X-ray microscopy at 4 keV photon energy with 60 nm resolution. Neuhäusler, Ulrich; Schneider, Gerd; Warwick, T. // AIP Conference Proceedings;2004, Vol. 705 Issue 1, p1255 

    X-ray microscopy in the multi-keV photon energy range offers unique possibilities to study thick dense samples with high spatial resolution. When employing a high numerical aperture (N.A.) condenser zone plate sample illumination in combination with a high resolution micro zone plate objective...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics