Rise time in shock consolidation of materials

Tong, W.; Ravichandran, G.
November 1994
Applied Physics Letters;11/28/1994, Vol. 65 Issue 22, p2783
Academic Journal
Examines the effect of dynamic loading rate and initial powder temperature on shock rise time in porous materials. Formulation of finite elastic/viscoplastic deformation of a spherical shell; Particularity of increasing shock pressure with shock rise time; Discussion on the analysis in relation to time-resolved shock rise time measurement.


Related Articles

  • Mesoscale Descriptions of Shock-Loaded Heterogeneous Porous Materials. Baer, M. R.; Trott, W. M. // AIP Conference Proceedings;2002, Vol. 620 Issue 1, p713 

    Recent simulations and experimental studies have revealed that dispersive waves are associated with impact on heterogeneous materials. The shock response includes fluctuating states and localization effects due to the interaction of multiple waves and deformation at material boundaries. These...

  • Calculated Hugoniot Curves of Porous Metal: Copper, Nickel, and Molybdenum. Wang, Y.; Ahuja, R.; Johansson, B. // AIP Conference Proceedings;2002, Vol. 620 Issue 1, p67 

    Calculated Hugoniots curves of porous metal Cu, Ni, and Mo are reported using the newly developed classical mean-field potential approach where both the cold and thermal parts of the Helmholtz free-energy are derived entirely from the 0-K total energies and electronic density of states...

  • Dynamic compression and recovery of cancellous bone for microstructural investigation. Prot, M.; Cloete, T. J.; Pattofatto, S. // EPJ Web of Conferences;2012, Issue 26, Special section p1 

    Knowledge of soft porous materials, such as cancellous bone, under dynamic loading requires accurate descriptions of high-rate mechanical responses. A novel modification of the standard Split Hopkinson Pressure Bar (SHPB) technique, that makes dynamic specimen recovery possible, is presented....

  • Thermal Decomposition Models for High Explosive Compositions. Zucker, J. M.; Barra, A. J.; Zerkle, D. K.; Kaneshige, M. J.; Dickson, P. M. // AIP Conference Proceedings;2006, Vol. 845 Issue 1, p559 

    As interest in the cook-off response of high explosives expands to include commercially-available compositions, the need has arisen for a broad spectrum of predictive capabilities to describe the untoward thermal decomposition of these explosives. Empirical models for several compositions,...

  • THE IMPULSIVE LOADING INFLUENCE ON DYNAMIC RESPONSE PARAMETERS OF THE VIADUCT TYPE STRUCTURE. Leopa, Adrian // Annals of the University Dunarea de Jos of Galati: Fascicle XIV,;2011, Issue 2, p59 

    Bridges and viaducts are vital structures ensuring ways of communication, so they must be protected from dynamic loads from traffic or seismic activity. For this reason are embedded in their structure dynamic isolation systems for damping and isolating the shocks and vibration to which they are...

  • Family of shock adiabats of a solid with different initial temperatures. Molodets, A. // Combustion, Explosion, & Shock Waves;May2006, Vol. 42 Issue 3, p346 

    A family of shock adiabats for an elementary solid is considered for different initial thermodynamic states of the solid. In this family, each shock adiabat is calculated using a known reference shock adiabat for the same monolithic material under specified initial conditions. Initial states for...

  • Shock and impact initiation of a porous incendiary material. Davis, Jeffery J.; Woody, Diana L.; Miller, Philip J. // AIP Conference Proceedings;2000, Vol. 505 Issue 1, p771 

    In order to better understand the deformation - initiation process, experiments have been performed in which an energetic composition containing KClO[SUB4] and Al/Mg was impact tested via gas gun at velocities ranging from 0.33-0.98 mm/μs at two densities: 84 and 70% TMD. An investigation of...

  • Experiment and Theory for the Characterization of Porous Materials. Resnyansky, A. D.; Bourne, N. K.; Millett, J. C. F. // AIP Conference Proceedings;2002, Vol. 620 Issue 1, p717 

    Two basic experimental methods are generally used for constructing the Hugoniot of porous materials. The first allows measurement of the shock versus the particle velocity in the medium whilst the second emphasises measurement of the profiles with embedded gauges. The first technique uses the...

  • Comparative study of analytical methods for Hugoniot curves of porous materials. Boshoff-Mostert, L.; Viljoen, H. J. // Journal of Applied Physics;8/1/1999, Vol. 86 Issue 3, p1245 

    Presents information on a study which compared the methods used for the computation of Hugoniots for porous materials. Analytical models for shock Hugoniots; Comparison of methods with experimental results; Conclusions.


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics