TITLE

Improved aqueous etchant for high T[sub c] superconductor materials

AUTHOR(S)
Ashby, Carol I.H.; Martens, Jon
PUB. DATE
April 1992
SOURCE
Applied Physics Letters;4/27/1992, Vol. 60 Issue 17, p2147
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Develops an aqueous etchant for high temperature superconductor materials. Factors responsible for the increase in surface resistance; Cause of the reduction of surface-resistance degradation; Selection of etching times for surface resistant measurements.
ACCESSION #
4232856

 

Related Articles

  • Di- and Tricarboxylic-acid-based etches for processing high temperature superconducting thin films. Ginley, D.S.; Ashby, C.I.H.; Plut, T.A.; Urea, D.; Siegal, M.P.; Martens, J.S. // Applied Physics Letters;10/25/1993, Vol. 63 Issue 17, p2429 

    Presents a class of chelating etches for processing yttrium-barium-copper and thallium-barium-calcium-cobalt high temperature superconductors. Implications for the fabrication of high-frequency devices; Increase in microwave surface resistance; Applications of the etch technology.

  • Applied unveils remote plasma etcher system.  // Electronic News (10616624);7/10/95, Vol. 41 Issue 2073, p102 

    Comments on Applied Materials' introduction of an etch system with what it called the remote plasma source (RPS) for solving problems associated with wet etch systems used for many isotropic etch procedures. Its suitability for devices with 0.5 micron features and below; How it extends...

  • Catalyzed gaseous etching of silicon. Selamoglu, Nur; Mucha, John A.; Flamm, Daniel L.; Ibbotson, Dale E. // Journal of Applied Physics;8/1/1987, Vol. 62 Issue 3, p1049 

    Presents the traces of copper and silver to accelerate the etching of silicon by molecular fluorine. Examples of enhancement of silicon etching; Arrhenius plot of silicon etch rate with and without copper present; Effect of etchant gas and metal contaminant on silicon etching.

  • Mass spectrometric transient study of dc plasma etching of Si in CF4 and CF4/O2 mixtures. Brandt, W. W.; Honda, T. // Journal of Applied Physics;1/1/1985, Vol. 57 Issue 1, p119 

    Carries out the direct current plasma experiments on polycrystalline silicon wafers using californium (CF)[sub4] and CF[sub4]/oxygen mixtures as etchants. Rate of oxygen absorption; Effect on the etching rate when oxygen pulses are injected simultaneously with CF[sub4] pulses; Removal of oxide...

  • Formation of optoelectronic structures based on InAsSb/InAsSbP solid solutions. Grebenshchikova, E. A.; Litvak, A. M.; Sherstnev, V. V.; Yakovlev, Yu. P. // Technical Physics Letters;Aug98, Vol. 24 Issue 8, p593 

    An etchant having the composition HCl/CrO[sub 3]/HF/H[sub 2]O is proposed for fabricating optoelectronic devices (lasers, light-emitting diodes, and photodiodes) based on InAs solid solutions for the 3 - 5 µm spectral range. It is shown that the proposed etchant ensures isotropic rates of...

  • High efficiency chemical etchant for the formation of luminescent porous silicon. Kelly, Michael T.; Chun, Jonathan K.M. // Applied Physics Letters;3/28/1994, Vol. 64 Issue 13, p1693 

    Describes a chemical etchant for the formation of a porous silicon. Comparison of the photoluminescent intensity between hydrofluoric acid (HF) solutions with ion NO[sup +] and nitric acid/HF based stain etches; Improvement of the etch induction time; Identification of NO[sup +] as the active...

  • Etchants for ancient iron implements. Piaskowski, Jerzy; Radzikowska, Janina // Advanced Materials & Processes;Feb2001, Vol. 159 Issue 2, p45 

    Focuses on the microstructure of ancient and medieval iron implements. Klemm's I color etchant and its component; Analysis of the microstructures of ancient iron implements, including Damascus steel blades, Japanese swords and bloomery iron.

  • Liquid etching of metallization layers on GaAs/Al x Ga1 - x as heterostructures with HNO3 + HCl + glycerol mixture. Arbenina, V.; Marmalyuk, A.; Arbenin, D.; Budkin, I.; Govorkov, O. // Inorganic Materials;Nov2008, Vol. 44 Issue 12, p1278 

    A program package is developed for simplex-lattice-design processing of the data on etching of solid systems in multicomponent etchants. The procedure suggested is implemented in studying the processes of etching of metallization layers on GaAs/Al x Ga1 - x As semiconductor heterostructures in...

  • Developing Cross Section Sets for Fluorocarbon Etchants. Winstead, Carl; McKoy, Vincent // AIP Conference Proceedings;2002, Vol. 636 Issue 1, p241 

    Successful modeling of plasmas used in materials processing depends on knowledge of a variety of collision cross sections and reaction rates, both within the plasma and at the surface. Electron-molecule collision cross sections are especially important, affecting both electron transport and the...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics