Separate confinement electroabsorption modulator for 633 nm light

Haase, M.A.; Misemer, D.K.
April 1992
Applied Physics Letters;4/27/1992, Vol. 60 Issue 17, p2054
Academic Journal
Describes a guided-wave electroabsorption modulator. Basis of the modulator; Use of aluminum gallium arsenide waveguide technology; Advantages of the modulator; Magnitude of extinction ratios.


Related Articles

  • Single-mode/multimode waveguide electro-optic grating coupler modulator. Wang, Michael R.; Guoda Xu // Applied Physics Letters;5/15/1995, Vol. 66 Issue 20, p2628 

    Evaluates the single-mode/multimode waveguide electro-optic grating coupling modulator (EGCM). Composition of EGCM; Application of modulation signals on the interdigital electrodes; Presence of a wide wavelength range.

  • High efficiency guided-wave magnetooptic Bragg cell modulator using nonuniform bias magnetic field. Tsai, C.S.; Lin, Y.S. // Applied Physics Letters;12/22/1997, Vol. 71 Issue 25, p3715 

    Presents a technique for enhancement of the diffraction efficiency of a guided-wave magnetooptic Bragg cell modulator. Use of nonuniform bias magnetic field in bismuth-doped yttrium iron garnet-gadolinium gallium garnet wave guide; Creation of a lensing effect upon the magnetostatic forward...

  • Gallium arsenide supports efficient 1300-nm electro-absorption waveguide modulator.  // Laser Focus World;Oct97, Vol. 33 Issue 10, p11 

    Focuses on University of California-San Diego researchers' demonstration of what they believe is the first high-speed multiple-quantum-well electro-absorption waveguide modulator using a relatively thin step-graded relaxed buffer on a gallium arsenide substrate. Electro-optic slope efficiency;...

  • Waveguide coupler-Bragg reflector operates as optical switch.  // Laser Focus World;Oct97, Vol. 33 Issue 10, p13 

    Focuses on a study suggesting that a metal-semiconductor-metal structure consisting of an aluminum grating on a silicon-on-insulator waveguide acts as an intensity-dependent modulator for normal incidence beams. Development of a device into an optical switch; Modulating the reflectivity of the...

  • High performance electro-optic polymer waveguide device. Hyang-Mok Lee; Wol-Yon Hwang // Applied Physics Letters;12/29/1997, Vol. 71 Issue 26, p3779 

    Assesses the performance of electro-optic modulators. Selection of materials in the electro-optic waveguide devices; Characteristic of the cladding material in relation to optical insertion loss; Response of the Mach-Zehnder modulator to electrical input.

  • Demonstration of the heterostructure field-effect transistor as an optical modulator. Taylor, G.W.; Vang, T.; Sargood, S.K.; Cooke, P.; Claisse, P. // Applied Physics Letters;8/26/1991, Vol. 59 Issue 9, p1031 

    Presents a semiconductor waveguide absorption modulator utilizing a heterostructure field-effect transistor structure. Device extinction ratio; Measurement of transistor transconductance of the materials; Integration of an identical structure in optoelectronic devices.

  • New modulator for far-infrared light: Integrated mirror optical switch. Stiens, J.; Kuijk, M.; Vounckx, R.; Borghs, G. // Applied Physics Letters;12/16/1991, Vol. 59 Issue 25, p3210 

    Proposes an integrated mirror optical switch of the far-infrared light modulator. Operation of the modulator based on the reflection properties; Plasma properties of an electron gas in semiconductors; Technological problems associated with the design of waveguides.

  • Wide-bandwidth guided-wave electro-optic intensity modulator at λ=3.39 μm. Becker, R. A.; Rediker, R. H.; Lind, T. A. // Applied Physics Letters;5/1/1985, Vol. 46 Issue 9, p809 

    A Ti-indiffused guided-wave interferometric modulator has been demonstrated at λ = 3.39 µm with a linear small-signal 3-dB bandwidth of 1.8 GHz. This is the first interferometric modulator operating at λ > 1.6 µm. An extinction ratio of 18.9 dB was obtained with Vπ = 31 V for...

  • Overlap integral factor enhancement using buried electrode structure in polymer Mach-Zehnder modulator. Song, Reem; Steier, William H. // Applied Physics Letters;1/21/2008, Vol. 92 Issue 3, p031103 

    A buried coplanar waveguide (CPW) electrode for a polymer modulator is introduced in this letter. In this configuration, the electric and the optical fields are aligned and the overlap factor is enhanced. Thus, the poling efficiency can increase and VÏ€ decreases. Using two electro-optic...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics