TITLE

Study of Y[sub 1]Ba[sub 2]Cu[sub 3]O[sub 7--delta] film growth on (200) oriented yttria

AUTHOR(S)
Chatterjee, R.; Fukutomi, M.
PUB. DATE
July 1994
SOURCE
Applied Physics Letters;7/4/1994, Vol. 65 Issue 1, p109
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Demonstrates the growth mechanism of 123 films on metallic substrates with oriented and partially a-b plane oriented polycrystalline yttria stabilized zirconia buffer layer. Microstructure and grain morphology of yttrium barium copper oxide (YBCO); Manifestation on YBCO films on c-axis; Growth mechanism of YBCO films on metallic substrates.
ACCESSION #
4227590

 

Related Articles

  • Low-temperature grain growth of initially <100> textured polycrystalline silicon films amorphized by silicon ion implantation with normal incident angle. Egami, Koji; Ogura, Atsushi; Kimura, Masakazu // Journal of Applied Physics;1/1/1986, Vol. 59 Issue 1, p289 

    Presents a study which examined the low-temperature grain growth of initially <100> textured polycrystalline silicon films amorphized by silicon ion implantation with normal incident angle. Information on the seed selection through ion chanelling technique in solid-state re growth; Methodology;...

  • Highly crystallized (La,Sr)MnO3 films deposited by facing targets sputtering apparatus. Matsushita, N.; Noma, K.; Nakagawa, S.; Naoe, M. // Journal of Applied Physics;4/15/1996, Vol. 79 Issue 8, p5247 

    Focuses on a study which investigated the crystalline orientation and magnetic characteristics of (La[sub1-x]Sr[subx]MnO[sub 3] films deposited on thermally oxidized silicon wafers. Composition of the film; Crystalline orientation of the film; Magnetic characteristic of the film.

  • Incontinuous grain growth in pure Co nanocrystalline powders prepared by mechanical attrition. Xiaoyan Song; Jiuxing Zhang; Keyong Yang // Journal of Materials Research;Nov2005, Vol. 20 Issue 11, p3054 

    Highly pure Co nanocrystalline powders were prepared by high-energy ball milling under the condition that all operations on the powders were performed in the glovebox filled with highly purified argon gas. A series of annealing experiments at different temperatures were carried out to...

  • Grain size control in polycrystalline colloidal solids. Palberg, Thomas; Mönch, Wolfgang; Schwarz, Jürgen; Leiderer, Paul // Journal of Chemical Physics;3/22/1995, Vol. 102 Issue 12, p5082 

    Recent experiments on the static and dynamic properties of polycrystalline colloidal solids show a pronounced influence of morphological details. Here we investigate several possibilities to vary systematically one key morphological parameter, namely the average crystallite radius rc of...

  • Sputtered BiPbSrCaCuO films on polycrystalline CuO substrates. Das, S. K.; Suryanarayanan, R.; Gorochov, O. // Applied Physics Letters;4/9/1990, Vol. 56 Issue 15, p1496 

    BiPbSrCaCuO films have been deposited for the first time onto polycrystalline CuO substrates by dc sputtering. The films become superconducting after they are post-annealed in air. Zero resistivity is observed between 38 and 72 K depending on the annealing conditions. The sample showing an onset...

  • Evolution of texture at growth of titanium nitride films prepared by photon and ion beam.... Zeitler, M.; Gerlach, J.W. // Applied Physics Letters;3/10/1997, Vol. 70 Issue 10, p1254 

    Investigates the effect of film thickness on the evolution of polycrystalline titanium nitride films texture grown by photon and ion beam assisted deposition. Deposition of layers in high-vacuum on (111)Si with the N-ion energy constant at 2kev; Measurement of x-ray pole figure; Explanation for...

  • Microhardness and Young’s modulus of diamond and diamondlike carbon films. Savvides, N.; Bell, T. J. // Journal of Applied Physics;10/1/1992, Vol. 72 Issue 7, p2791 

    Presents a study which examined the microhardness and Young's modulus of a polycrystalline diamond film and several amorphous diamond like carbon films using an ultralow-load microhardness instrument. Preparation of the films; Mechanical properties of films; Method used in obtaining the...

  • Fully in plane aligned SmCo based films prepared by pulsed laser deposition. Cadieu, F.J.; Rani, R. // Journal of Applied Physics;4/15/1999 Part 2B of 2, Vol. 85 Issue 8, p5895 

    Describes how the samarium-cobalt based films directly crystallized onto moderately heated polycrystalline substrates have been synthesized by pulsed laser deposition. Experimental details; Results.

  • Microstructural control of diamond thin films by microlithographic patterning. DeNatale, J. F.; Flintoff, J. F.; Harker, A. B. // Journal of Applied Physics;10/15/1990, Vol. 68 Issue 8, p4014 

    Presents a study which utilized microlithographic patterning to elucidate the mechanisms controlling diamond film nucleation and grain growth. Experimental details; Results and discussion; Conclusion.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics