Gain-guided laser diode having a curved-mirror-cavity with a low astigmatism

Toda, A.; Kobayashi, T.
August 1993
Applied Physics Letters;8/9/1993, Vol. 63 Issue 6, p726
Academic Journal
Examines the fabrication of gain-guided laser diode containing curved-mirror-cavity by dry etching. Determination of the astigmatism and threshold current of the laser; Description of the etched mirrors of the laser diode cavity; Similarity between the etched mirror lasers and cleaved laser diodes.


Related Articles

  • High quantum efficiency monolithic arrays of surface-emitting AlGaAs diode lasers with.... Donnelly, J.P.; Goodhue, W.D. // Applied Physics Letters;9/28/1992, Vol. 61 Issue 13, p1487 

    Examines the operation of monolithic arrays of surface-emitting AlGaAs diode lasers with dry-etched vertical facets and parabolic deflecting mirrors in wave current pulses. Formation of vertical facets and parabolic deflecting mirrors; Improvement in facet smoothness and quality; Reduction in...

  • Low-threshold InGaAs/GaAs strained-layer ridge waveguide surface emitting lasers with two.... Chih-Ping Chao; Kwok-Keung Law; Merz, James L. // Applied Physics Letters;9/23/1991, Vol. 59 Issue 13, p1532 

    Demonstrates in-plane surface emitting laser structure with dry etched two 45 degree mirrors. Features of the device with an epitaxially grown distributed Bragg reflector; Impact of angle etching on the device performance; Mechanisms for coupling loss reduction.

  • Real-time in situ detection of SF[sub 6] in a plasma reactor. Sun, H.C.; Whittaker, E.A. // Applied Physics Letters;8/23/1993, Vol. 63 Issue 8, p1035 

    Describes the real-time in situ detection of sulfur hexafluoride (SF[sub 6]) in a plasma etching reactor. Use of a tunable diode laser absorption spectrometer in detecting SF[sub 6]; Employment of the combined wavelength and frequency modulation of the laser diode in the spectrometry; Provision...

  • Laser etching for flip-chip de-bug and inverse stereolithography for MEMS. Ehrlich, Daniel; Silverman, Scott; Aucoin, Richard; Burns, Michael // Solid State Technology;Jun2001, Vol. 44 Issue 6, p145 

    Presents information on a study which focused on the mechanisms for laser microchemical etching of silicon. Surface morphology, quality and chemical selectivity of silicon; Anatomy of a laser microchemical instrument; Conclusion.

  • Single pulse nm-size grating formation in polymers using laser ablation with an irradiation... Lippert, T.; Gerber, T. // Applied Physics Letters;8/16/1999, Vol. 75 Issue 7, p1018 

    Discusses the use of laser ablation of 355 nanometer of a specially designed polymer as a true single step dry-etching process to create a two-beam interference grating. Attainment of variable modulation frequencies by varying the laser fluence and/or the angle between the two beams.

  • Detection of Cl in rf plasmas by laser-excited stimulated emission. Sappey, Andrew D.; Jeffries, Jay B. // Applied Physics Letters;9/18/1989, Vol. 55 Issue 12, p1182 

    Laser-excited stimulated emission is used to detect chlorine atoms in a Cl2/Ar rf etching plasma. Two laser photons near 233.3 nm excite the 3p44p 4S0 electronic state of atomic chlorine in a spin-forbidden transition from the 3p5 2P0 ground state. At modest laser fluence stimulated emission is...

  • Performance of dry-etched short cavity GaAs/AlGaAs multiquantum-well lasers. Yuasa, Tonao; Yamada, Tomoyuki; Asakawa, Kiyoshi; Ishii, Makoto; Uchida, Mamoru // Journal of Applied Physics;3/1/1988, Vol. 63 Issue 5, p1321 

    Presents a study which described the fabrication and lasing characteristics of short cavity gallium arsenide/aluminum gallium arsenide multiquantum-well lasers with dry-etched facets. Information on short cavity lasers and dry etching; Fabrication procedure; Results and discussion.

  • Atomic chlorine concentration and gas temperature measurements in a plasma etching reactor. Wormhoudt, J.; Stanton, A. C.; Richards, A. D.; Sawin, H. H. // Journal of Applied Physics;1/1/1987, Vol. 61 Issue 1, p142 

    Describes the use of tunable diode laser absorption to measure both gas temperatures and chlorine atom concentrations in a plasma etching reactor. Causes of anistrophic etching; Techniques used to measure rotational and vibrational plasma temperatures; Drawbacks of titration techniques.

  • Spatially and temporally resolved laser-induced fluorescence measurements of CF2 and CF radicals in a CF4 rf plasma. Booth, J. P.; Hancock, G.; Perry, N. D.; Toogood, M. J. // Journal of Applied Physics;12/1/1989, Vol. 66 Issue 11, p5251 

    Presents a study which examined the temporal behavior of ground-state CF[sub2] and CF radicals in a CF[sub4] plasma etching reactor using laser-induced fluorescence. Methods used in the study of atomic, molecular, and ionic species in the gas discharges used for semiconductor processing;...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics