TITLE

Torsional modulus of vapor-grown carbon fibers

AUTHOR(S)
Jianhui Chen; Yan Lu
PUB. DATE
May 1992
SOURCE
Applied Physics Letters;5/11/1992, Vol. 60 Issue 19, p2347
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Determines the torsional modulus (G) of vapor-deposited carbon fibers in as-grown and annealed samples. Application of a torsion pendulum; Relation of G with stress and size; Variation in the extrapolated zero-stress value of G on varying fibers; Factors affecting the G values.
ACCESSION #
4227359

 

Related Articles

  • THE INFLUENCE OF MATERIAL TYPES ON TWIST ANGLES AND TORSION STABILITY OF A COMPOSITE SHAFT. Djordjevic, Zorica; Blagojevic, Mirko; Marjanovic, Vesna; Jovanovic, Sasa // Tehnicki vjesnik / Technical Gazette;Sep/Oct2014, Vol. 21 Issue 5, p917 

    The advantages of composite materials over the conventional ones include the ability to vary their properties in order to ensure the best combination for each application. This is achieved through selection of their constituent materials, quantities, distribution and fibre orientation angle. In...

  • Torsional modulus and internal friction of polyacrylonitrile- and pitch-based carbon fibers. Ishikawa, Masashi; Kogo, Yasuo; Koyanagi, Jun; Tanaka, Fumihiko; Okabe, Tomonaga // Journal of Materials Science;Nov2015, Vol. 50 Issue 21, p7018 

    In the present work, the torsional modulus and internal friction of different types of polyacrylonitrile (PAN)- and pitch-based carbon fibers were measured with the torsional pendulum method to evaluate the relationship between these properties and the microstructure of carbon fibers. For easier...

  • Reliabilty-based Torsional Design of Reinforced Concrete Beams Strengthened with CFRP Laminate. Dehghani, H.; Fadaee, M. J. // International Journal of Engineering (1025-2495);Oct2013, Vol. 26 Issue 10, p1103 

    The structural reliability of torsional concrete beams strengthened with full and strip wrapping of carbon fiber reinforced polymer (CFRP) laminate is investigated. The first order-second moment reliability method has been applied to make a reliability assessment on the torsional capacity...

  • Theoretical calculation of strength and method of determining the stiffness of twisted yarn in torsion. Skulanova, N.; Popova, E. // Fibre Chemistry;Jul2013, Vol. 45 Issue 2, p101 

    Theoretical calculations are performed for three compositions of Kamvol yarn made with the use of polyacrylonitrile fibers. The instruments, equipment, and method used to determine the stiffness characteristics of the fibers and yarn are described, and results are presented from experimental...

  • Carbon fiber shows promise in hip replacements.  // R&D Magazine;Apr96, Vol. 38 Issue 5, p66 

    Reports that carbon-fiber femoral stems made in England, are an alternative to metal implants prone to fatiguing or losing at the bone interface. Development of original carbon-fiber fermoral stems for the aerospace industry.

  • Mechanical properties of the 3D polymerized, sp2-sp3 amorphous, and diamond-plus-graphite... Brazhkin, V.V.; Lyapin, A.G.; Popova, S.V.; Kyuev, Yu. A.; Naietov, A.M. // Journal of Applied Physics;7/1/1998, Vol. 84 Issue 1, p219 

    Researches the mechanical properties of various kinds of carbon materials prepared from C60. Methodology used to conduct the study; Structural transformation under pressure 12.5 GPa; Information on the mechanical properties of sp2-sp3 carbon phases; Examination of the hardness affecting the...

  • Carbon fibre comes full circle. Wilson, Dave // Design Engineering;Jun96 Supplement, p35 

    Reports on the British Defense Evaluation and Research Agency's (DERA) development of the first continuous hollow carbon fiber from a poly-acrylo-nitrile precursor (PAN). Use of carbon fiber reinforced composite materials; Advantages of reduced weight and high specific strength and stiffness.

  • Less is more in race to be strong.  // New Scientist;4/13/96, Vol. 150 Issue 2025, p23 

    Reports that researchers at the Defence Evaluation and Research Agency's Structural Materials Centre, Farnborough, Hampshire, have developed the first hollow strands of carbon fiber. Application of the fiber in improving the speeds of aircraft and racing cars; Composition; Difficulties in...

  • Physics update. P.F.S. // Physics Today;Sep96, Vol. 49 Issue 9, p9 

    Reports on the measurement of the electrical and mechanical properties of individual carbon nanotubes. Study conducted by researchers at the NEC Research Institute and the University of Illinois at Urbana-Champaign; Average modulus of the fibers.

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics