Improved microscratch hardness of ion-plated carbon film by nitrogen inclusion evaluated by

Miyake, S.; Watanabe, S.
December 1994
Applied Physics Letters;12/19/1994, Vol. 65 Issue 25, p3206
Academic Journal
Examines the effect of reactive ion plating of extremely thin nitrogen-containing carbon films on indentation and microscratch hardness. Influence of surface roughness and substrate hardness on indentation hardness; Efficacy of an atomic force microscope to determine the effect of nitrogen inclusion on scratched wear depth.


Related Articles

  • Surface pattern and large low-field magnetoresistance in La[sub 0.5]Ca[sub 0.5]MnO[sub 3] films. Peng, H. B.; Zhao, B. R. // Applied Physics Letters;3/15/1999, Vol. 74 Issue 11, p1606 

    Studies surface pattern and large low-field magnetoresistance in LaCaMnO[sub3] films. Mismatch of the thermal expansion coefficient between the film and the substrate; Grain chains in the surface pattern.

  • The effect of Al-Ta[sub 2]O[sub 5] topographic interface roughness on the leakage current of...  // Applied Physics Letters;5/10/1999, Vol. 74 Issue 19, p2800 

    Studies the effect of Al-Ta[sub2]O[sub5] topographic interface roughness on the leakage current of Ta[sub2]O[sub5] thin films. Electrical properties of the thin films; Increase of the thickness of the thin films.

  • Kinetic and Monte Carlo models of thin film coarsening: Cross over from diffusion-coalescence to Ostwald growth modes. Lo, Alan; Skodje, Rex T. // Journal of Chemical Physics;1/22/2000, Vol. 112 Issue 4 

    Thin films of adsorbates on solid surfaces often exhibit irreversible clustering and island growth phenomena where the mean island size grows larger with a temporal power law dependence, accompanied by a scaling island size distribution function. This coarsening process is typically described...

  • Experimental test for elastic compliance during growth on glass-bonded compliant substrates. Moran, P. D.; Moran, P.D.; Hansen, D. M.; Hansen, D.M.; Matyi, R. J.; Matyi, R.J; Mawst, L. J.; Mawst, L.J.; Kuech, T. F.; Kuech, T.F. // Applied Physics Letters;5/1/2000, Vol. 76 Issue 18 

    Highly mismatched films (In[sub 0.44]Ga[sub 0.56]As, 3% mismatch) grown well beyond their critical thickness (to 3 μm) on GaAs glass-bonded compliant substrates exhibit surfaces four times smoother and strain distributions twice as narrow as films grown simultaneously on conventional GaAs...

  • Electronic properties of In[sub 2]O[sub 3] surfaces. Klein, Andreas // Applied Physics Letters;9/25/2000, Vol. 77 Issue 13 

    Surfaces of reactively evaporated In[sub 2]O[sub 3] films were investigated in situ by synchrotron-excited photoemission. Work function, valence band maximum, and electronic states in the band gap were determined as a function of oxygen pressure. Surface and bulk electronic properties can only...

  • Local capacitance measurements on InAs dot-covered GaAs surfaces by scanning capacitance microscopy. Yamamoto, H.; Takahashi, T.; Kamiya, I. // Applied Physics Letters;9/25/2000, Vol. 77 Issue 13 

    Capacitance images responsible for surface depletion were observed on an InAs dot-covered GaAs surface by scanning capacitance microscopy. We performed local capacitance versus bias voltage measurements on quantum dots (QDs) and a wetting layer (WL) as well as conductance versus bias voltage...

  • Highly anisotropic morphologies of GaAs(331) surfaces. Yazdanpanah, V. R.; Wang, Z. M.; Salamo, G. J. // Applied Physics Letters;3/17/2003, Vol. 82 Issue 11, p1766 

    The surface morphology of the GaAs(331) surface was investigated by in situ reflection high-energy electron diffraction and scanning tunneling microscopy. It was found, that GaAs(331) A and B surfaces are both faceted on a nanometer scale, containing (110) and (111) facets which are atomically...

  • Two-step preparation of 6H-SiC(0001) surface for epitaxial growth of GaN thin film. Qizhen Xue; Xue, Q.K.; Hasegawa, Y.; Tsong, I.S.T.; Sakurai, T. // Applied Physics Letters;4/26/1999, Vol. 74 Issue 17, p2468 

    Describes a two-step preparation of 6H-SiC(0001) surface for epitaxial growth of GaN thin film. GaN thin film obtained by radio frequency nitrogen plasma assisted molecular beam epitaxy; Morphology of the surface.

  • Tailoring the surface morphology of amorphous thin films by appropriately chosen deposition conditions. Mayr, S. G.; Samwer, K. // Journal of Applied Physics;3/1/2002, Vol. 91 Issue 5, p2779 

    Amorphous thin film growth on a substrate by cocondensation is dominated by growth instabilities arising from self shadowing and surface diffusion, and these lead to pronounced three dimensional growth. It is possible to influence structure formation profoundly through systematic variation of...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics