TITLE

Artificial two-phase Nb-Ti nanostructures using powder metallurgy techniques

AUTHOR(S)
Jablonski, P.D.; Lee, P.J.
PUB. DATE
August 1994
SOURCE
Applied Physics Letters;8/8/1994, Vol. 65 Issue 6, p767
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Describes a powder metallurgy process for the formation of artificial two-phase niobium-titanium nanostructures. Estimation of critical current density values; Description of the strain space used to produce the nanometer scale flux pinning centers; Optimization of the matrix niobium-titanium composition.
ACCESSION #
4221586

 

Related Articles

  • Room-Temperature Tensile and High-Cycle-Fatigue Strength of Fine TiB Paniculate-Reinforced Ti-22Al-27Nb Composites. Emura, Satoshi; Hagiwara, Masuo; Seung Jin Yang // Metallurgical & Materials Transactions. Part A;Sep2004, Vol. 35 Issue 9, p2971 

    To further improve the mechanical properties of a Ti-22Al-27Nb (mol pct) alloy, based on the ordered orthorhombic Ti2 (O phase), a TiB particulate-reinforced Ti-22A1-27Nb matrix composite was prepared using the gas-atomized powder metallurgy method. Because of the rapid solidification during the...

  • EDITOR'S NOTE. Lawley, Alan // International Journal of Powder Metallurgy;Jan/Feb2009, Vol. 45 Issue 1, p2 

    The article discusses various reports published within the issue, including one by David Whittaker which looks at the future prospects for powder metallurgy (PM) titanium applications and another by Nikolaos Vlachos and T. H. Chang which offered insights into the program module on the...

  • Cutting the cost of TITANIUM. Hurless, Brian E.; Froes, F.H. // Advanced Materials & Processes;Dec2002, Vol. 160 Issue 12, p37 

    Reports the development of titanium cost reduction technologies in the areas of powder production and powder consolidation. Accounts on the cost of titanium extraction; Commercialization of the thermochemical Kroll process; Purification of the titanium metal by removing dissolved oxygen.

  • Efeito da adi��o de Nb, Mo, Cr e Ti na microestrutura do WC-6Co. Savi, Jose Roberto; Wilson Corr�a Rodrigues; Martins, Vin�cius; Limberger, Rodrigo Prestes; Schaeffer, L�rio // Estudos Tecnol�gicos em Engenharia;2010, Vol. 6 Issue 3, p162 

    Hard metals are a group of materials known as sintered composites involving hard phases (carbides) with a metallic phase, being widely used in applications where you want high hardness and wear resistance combined with high toughness. This article presents the results of adding 1% by weight of...

  • Shape-memory NiTi-Nb foams. Bansiddhi, Ampika; Dunand, David C. // Journal of Materials Research;Jun2009, Vol. 24 Issue 6, p26 

    The article focuses on a study on the development of a porous NiTi using a powder metallurgy method, which entails mixing liquid phase sintering of NiTi powders and formation of pores by NaCl space holders. It describes the NiTi-Nb walls demonstrated by the resulting foams. Also noted are the...

  • Preparation of ultrafine layered tetratitanate powders using nanoscale TiO2 as reactant and their intercalation property. Juan Yang // Journal of Materials Science;Jul2005, Vol. 40 Issue 14, p3765 

    Ultrafine layered potassium tetratitanate K2Ti4O9 powders were prepared by solid-state reaction using nanometer sized TiO2 as the reactant. The structures of the titanates and the products which had undergone H+ exchange and intercalated by propylamine and [Al13O4(OH)24(H2O)12]7 + (Al137 +) were...

  • Effect of the precursor heat treatment procedure on the properties of titania photocatalysts. Zakharova, G.; Andreikov, E. // Inorganic Materials;Jul2012, Vol. 48 Issue 7, p727 

    We have studied the effect of heat treatment of titanium dioxide nanopowders prepared by autoclaving peroxo titanic acid gel at 130°C and refluxing it on their structural properties and catalytic activity for methylene blue degradation. Titanic acid precipitated from an aqueous titanyl...

  • Preparation of titanium diboride nanopowders of different particle sizes. Volkova, L.; Kravchenko, S.; Korobov, I.; Kolesnikova, A.; Dremova, N.; Burlakova, A.; Kalinnikov, G.; Shilkin, S. // Inorganic Materials;Nov2013, Vol. 49 Issue 11, p1086 

    Reactions between titanium and microcrystalline boron powders in a NaBO ionic melt at temperatures from 700 to 850°C and those between TiCl and NaBH at temperatures from 300 to 750°C and hydrogen pressures of up to 10 MPa, with no solvent, have been studied by X-ray diffraction, scanning...

  • U.S. PATENTS.  // International Journal of Powder Metallurgy;Sep/Oct2004, Vol. 40 Issue 5, p70 

    Presents information on several patented products and processes for the powder metallurgical industry. Method of producing titanium; Preparation of articles using metal injection molding; Method for producing powder metal materials.

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics