TITLE

Deposition angle-dependent morphology of laser deposited YBa[sub 2]Cu[sub 3]O[sub 7] thin films

AUTHOR(S)
Soon-Gul Lee; Doo-Sup Hwang
PUB. DATE
August 1994
SOURCE
Applied Physics Letters;8/8/1994, Vol. 65 Issue 6, p764
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the surface morphology of pulsed laser deposited thin films. Epitaxial growth of the films; Effect of deposition angle on surface morphology, types of particles and number density; Composition of the droplets; Detection of a-oriented grains in the high angle films.
ACCESSION #
4221585

 

Related Articles

  • Critical parameters influencing the material distribution produced by pulsed laser deposition. del Coso, R.; Perea, A.; Serna, R.; Chaos, J.A.; Gonzalo, J.; Solis, J. // Applied Physics A: Materials Science & Processing;1999, Vol. 69 Issue 7, pS553 

    Abstract. The parameters that control the thickness distribution of thin films produced by pulsed laser deposition are investigated. It is found that highly asymmetric material distribution profiles can be obtained in vacuum when high energy densities are used and the target surface is...

  • Large-area pulsed laser deposition of YBCO thin films: homogeneity and surface. Schey, B.; Biegel, W.; Kuhn, M.; Stritzker, B. // Applied Physics A: Materials Science & Processing;1999, Vol. 69 Issue 7, pS419 

    Abstract. YBCO thin films and buffer layers are deposited by a special PLD setup with an 8-cm line focus on cylindrical targets and substrate scanning perpendicular to it. Different kinds of substrates (SrTiO[sub 3], MgO, LaAlO[sub 3], Y-ZrO[sub 2] and sapphire) as large as 7 x 20 cm[sup 2] were...

  • Initial growth behavior and resulting microstructural properties of heteroepitaxial ZnO thin films on sapphire (0001) substrates. Liu, C.; Chang, S. H.; Noh, T. W.; Abouzaid, M.; Ruterana, P.; Lee, H. H.; Kim, D.-W.; Chung, J.-S. // Applied Physics Letters;1/1/2007, Vol. 90 Issue 1, p011906 

    The initial growth behavior and resulting microstructural properties of heteroepitaxial ZnO thin films prepared by pulsed laser deposition on sapphire (0001) substrates were investigated. High-resolution x-ray diffraction and transmission electron microscopy studies revealed that the initial...

  • Composition control and electrical properties of PMN-PT thin films around the morphotropic boundary. Wang, J.; Wogn, K.H.; Chan, H.L.W.; Choy, C.L. // Applied Physics A: Materials Science & Processing;2004, Vol. 79 Issue 3, p551 

    We have successfully grown (1-x)Pb(Mg1/3- Nb1/3)O3-xPbTiO3 (PMN-PT) thin films with x=0.3, 0.35 and 0.4 by pulsed laser deposition. X-ray-diffraction studies reveal that the PMN-PT films grown on La0.5Sr0.5CoO3/LaAlO3 substrates form epitaxial heterostructures. Composition control and remedial...

  • Pulsed-laser deposition of high-k titanium silicate thin films. Brassard, D.; El Khakani, M. A. // Journal of Applied Physics;9/1/2005, Vol. 98 Issue 5, p054912 

    We report on the growth of high-k titanium silicate (TiSiO4) thin films by means of the pulsed-laser ablation of a TiO2/SiO2 composite target. We present a systematic investigation of the effect of the oxygen background pressure [P(O2)] and the substrate deposition temperature (Td) on both the...

  • High tunability (Ba,Sr)TiO3 thin films grown on atomic layer deposited TiO2 and Ta2O5 buffer layers. Il-Doo Kim; Tuller, Harry L.; Hyun-Suk Kim; Park, Jin-Seong // Applied Physics Letters;11/15/2004, Vol. 85 Issue 20, p4705 

    In this letter, we report on increased tunability of Ba0.6Sr0.4TiO3 (BST) thin films by use of Ta2O5 and TiO2 films as buffer layers between BST and Si substrates. Ta2O5 and TiO2 butler layers were grown by atomic layer deposition (ALD) onto Si substrates followed by pulsed laser deposition of...

  • Textured growth of highly coercive L10 ordered FePt thin films on single crystalline and amorphous substrates. Weisheit, M.; Schultz, L.; Fähler, S. // Journal of Applied Physics;6/1/2004, Vol. 95 Issue 11, p7489 

    FePt films have been prepared by pulsed laser deposition at a temperature of 800 °C onto (001) oriented single crystalline (MgO, SrTiO3) as well as amorphous substrates (Si3N4, glass) with and without a (001) textured MgO buffer layer. Although all films have been prepared under identical...

  • Fabrication and photosensitivity of AgInSe[sub 2]/III�VI isotypic heterojunctions. Rud�, V. Yu.; Gremenok, V. F.; Rud�, Yu. V.; Bekimbetov, R. N.; Bodnar�, I. V. // Semiconductors;Oct99, Vol. 33 Issue 10, p1097 

    AgInSe[sub 2] thin films on glass substrates have been prepared by pulsed laser deposition. Rectifying heterojunctions with a pronounced photovoltaic effect have been fabricated for the first time by placing such films in optical contact with layered III-VI (InSe, GaSe) semiconductors. The...

  • Critical dimensions for YBCO islands grown by pulsed laser deposition. Gilmore, C.M.; Kim, J. // Applied Physics A: Materials Science & Processing;2002, Vol. 75 Issue 5, p565 

    Islands of constant width at half maximum of approximately 100 nm have been observed during the pulsed laser deposition of films of nominal thickness from 0.7 to 3.0 nm of the material YBa[sub 2] Cu[sub 3] O[sub 7-d] (YBCO) on substrates of SrTiO[sub 3] . The critical island dimensions of width,...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics