TITLE

Formation of gallium nitride by a novel hot mechanical alloying process

AUTHOR(S)
Millet, P.; Calka, A.
PUB. DATE
November 1993
SOURCE
Applied Physics Letters;11/1/1993, Vol. 63 Issue 18, p2505
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Reports the first formation of gallium nitride powder by a hot mechanical alloying process. Study on the structural changes resulting from milling; Analysis on the elemental composition of as-milled product; Manifestation of the nanostructural phase; Demonstration of gallium nitride formation.
ACCESSION #
4221480

 

Related Articles

  • Study of permanent magnetic properties of the 1-12 nitrides with Nd and Pr. Yang, Ying-Chang; Pan, Qi; Cheng, Ben-Pai; Zhang, Xiao-Dong; Liu, Zun-Xiao; Sun, Yun-Xi; Ge, Sen-Ling // Journal of Applied Physics;11/15/1994, Vol. 76 Issue 10, p6725 

    Focuses on a study which investigated the permanent magnetic properties of isotropic and anisotropic powders of R(Fe,Mo)[sub12]N[subx] compounds. Sample preparation; Use of mechanical alloying and a conventional milling process; Results and discussion.

  • Mechanical Alloying of FeCo Nanocrystalline Magnetic Powders. Li, H. F.; Ramanujan, R. V. // Journal of Electronic Materials;Nov2004, Vol. 33 Issue 11, p1289 

    Mechanical alloying of the Fe50Co50 equiatomic-magnetic alloy from elemental powders has been studied. Two milling speeds of 200 rpm and 300 rpm were used to process these powders. The as-milled powders were characterized using scanning electron microscopy (SEM), energy-dispersive x-ray...

  • Ultrastrong nanodispersed tungsten pseudoalloys produced by high-energy milling and spark plasma sintering. Chuvil'deev, V. N.; Moskvicheva, A. V.; Nokhrin, A. V.; Baranov, G. V.; Blagoveshchenskii, Yu. V.; Kotkov, D. N.; Lopatin, Yu. G.; Belov, V. Yu. // Doklady Physics;Feb2011, Vol. 56 Issue 2, p109 

    The article discusses the production of ultrastrong nanodispersed tungsten pseudoalloys through high-energy milling and spark plasma sintering (SPS). It notes that the materials produced by liquid-phase sintering have an inhomogeneous coarse-grain structure and only a moderate level of...

  • PRODUCTION OF NANOMETRIC TUNGSTEN CARBIDE POWDERS BY PLANETARY MILLING. Butler, Brady G.; Jun Lu; Fang, Zhigang Z.; Rajamani, Raj K. // International Journal of Powder Metallurgy;Jan/Feb2007, Vol. 43 Issue 1, p35 

    Planetary ball-milling processes have proven applications for high-energy milling and mechanical alloying. In this study, the capabilities of a unique high-energy dual-drive planetary mill for producing bulk nanocrystalline powders are explored. Milling parameters of the double planetary mill...

  • Research of Milling Technique on V/Si by Mechanical Alloying. Bo Zhang // Advanced Materials Research;2014, Issue 881-883, p1479 

    V/Si binary powders were mechanical alloyed in ball milling machine. The change of microstructure of V/Si powders during mechanical alloying was investigated. The results showed that during ball milling, the size of mixture powders was reduced gradually and the particle shape transited to a...

  • Effects of Alloy Composition on Microstructure and Mechanical Properties of Iron-Based Materials Fabricated by Ball Milling and Spark Plasma Sintering. Ye, Yongquan; Li, Xiaoqiang; Hu, Ke; Qu, Shengguan; Li, Yuanyuan // Metallurgical & Materials Transactions. Part A;Jan2015, Vol. 46 Issue 1, p476 

    Three PM steels, Fe-0.8C, Fe-2Cu-1.5Ni-0.5Mo-0.8C, and Fe-2Cu-2Ni-1Mo-1C, were fabricated by mechanical milling and spark plasma sintering. Dense sintered samples with fine and homogeneous microstructure were obtained. According to the results of X-ray diffraction, differential scanning...

  • Effect of milling parameters on mechanical alloying of aluminum powders. Othman, A.; Sardarinejad, Ali; Masrom, Abdul // International Journal of Advanced Manufacturing Technology;Feb2015, Vol. 76 Issue 5-8, p1319 

    The solid-state interfacial state of aluminum powders was investigated upon inert gas, ball number and size, milling time, speed, and processing control agent (PCA) under high energy planetary mechanical alloying in sub-micron scale. The study observed significant variations in morphology of the...

  • Mechanical processing of Fe powders. Delogu, Francesco // Journal of Materials Science;Jun2012, Vol. 47 Issue 11, p4757 

    Fe powders were mechanically processed by ball milling. The average size of coherent diffraction domains and the average strain content were determined by X-ray diffraction. A mathematical model was developed to describe the microstructural refinement process as a function of the number of...

  • CALCULATION OF TENSION VALUES IN LAYER OF MATERIAL BEING MILLED IN A ROLLER-PLATE TYPE MILL WITH IRREGULAR MOVING ROLLERS. ROMANOV, V. P.; VETYUGOV, A. V.; BOGORODSKIY, A. V.; GUYUMDZHAN, P. P.; BLINICHEV, V. N. // Izvestiya Vysshikh Uchebnykh Zavedenii. Seriya Khimiya i Khimich;2011, Vol. 54 Issue 9, p128 

    In given article the equation for determination of equivalent tension in the layer of bulk material being milled in a roller-plate mill with irregular moving rollers has been obtained. Calculation dependences allowing determining values of main factors affecting on the grinder's performance are...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics