TITLE

DCM-polyimide system for triple-stack poled polymer electro-optic devices

AUTHOR(S)
Ermer, S.; Valley, J.F.
PUB. DATE
November 1992
SOURCE
Applied Physics Letters;11/9/1992, Vol. 61 Issue 19, p2272
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Presents an all-polyimide system suitable for fabrication of electro-optic wave guide devices on silicon substrates. Source of cladding layers; Components of the electro-optic material; Fabrication of an all-polyimide Mach-Zehnder modulator.
ACCESSION #
4221385

 

Related Articles

  • Design and fabrication of segmented, slotted waveguides for electro-optic modulation. Wang, Guangxi; Baehr-Jones, Tom; Hochberg, Michael; Scherer, Axel // Applied Physics Letters;10/1/2007, Vol. 91 Issue 14, p143109 

    Recently, slotted waveguides have been used in conjunction with second order nonlinear optical polymers to provide a platform for electro-optic modulation at telecommunication frequencies. A challenge with these devices is the need to provide high-frequency electrical driving signals to the...

  • Improvements in strain-balanced InGaAs/GaAs optical modulators for 1047-nm operation. Goodwill, D.J.; Walker, A.C.; Stanley, C.R.; Holland, M.C.; McElhinney, M. // Applied Physics Letters;3/7/1994, Vol. 64 Issue 10, p1192 

    Presents improvements in strain-balanced indium gallium arsenide/gallium arsenide electro-optic effect device modulators. Absorption peak of the device; Use of the indium gallium arsenide/gallium arsenide multiple quantum well; Application of a 13-V reverse bias to obtain a single pass...

  • 20 GHz electro-optic polymer Mach-Zehnder modulator. Girton, D.G.; Kwiatkowski, S.L. // Applied Physics Letters;4/22/1991, Vol. 58 Issue 16, p1730 

    Studies a electro-optic polymer-based integrated optic Mach-Zehnder modulator. Maximum measured frequency response; Half-wave voltage; Modulation depth; Observation of modulation using direct detection.

  • Novel self-electro-optic device using bulk Franz-Keldysh effects in an n[sup +]-GaAlAs-GaAs-Ag.... Tayebati, Parviz; Jauniskis, Linas // Applied Physics Letters;2/14/1994, Vol. 64 Issue 7, p898 

    Demonstrates a bistable self-electro-optic device (SEED) using Franz-Keldysh effects in an asymmetric Fabry-Perot optical modulator device. Observation on the contrast and reflectivity characteristics by the modulator; Provision of negative differential responsivity for SEED operation;...

  • Hybrid cross-linkable polymer/sol-gel waveguide modulators with 0.65 V half wave voltage at 1550 nm. Enami, Y.; Mathine, D.; DeRose, C. T.; Norwood, R. A.; Luo, J.; Jen, A. K.-Y.; Peyghambarian, N. // Applied Physics Letters;8/27/2007, Vol. 91 Issue 9, p093505 

    The authors report on a hybrid cross-linked electro-optic (EO) polymer/sol-gel Mach-Zehnder waveguide modulator with a half wave voltage (VÏ€) of 0.65 V at 1550 nm. The low VÏ€ was achieved by a design that (1) combines both physical vertical tapers in the sol-gel core and photobleached...

  • Channel waveguides in electro-optic polymers using a photopolymer cladding technique. Ashley, Paul R.; Tumolillo, Thomas A. // Applied Physics Letters;3/4/1991, Vol. 58 Issue 9, p884 

    Describes a fabrication technique for forming channel waveguides in organic electro-optic polymer materials. Use of projection printing to directly expose inverted ridge channel patterns in an ultraviolet curing optical epoxy cladding layer; Minimization of wall roughness and non-requirement of...

  • Comparison of the electro-optic coefficient r[sub 33] in well-defined phases of proton exchanged LiNbO[sub 3] waveguides. Méndez, A.; de la Paliza, G.; García-Cabañes, A.; Cabrera, J.M. // Applied Physics B: Lasers & Optics;2001, Vol. 73 Issue 5/6, p485 

    The electro-optic coefficient, r[sub 33] , of proton exchanged LiNbO[sub 3] waveguides has been measured in well-defined phases of the exchanged layer. Namely, in two low index-jump α-phases, i.e. unannealed soft-exchanged (SPE) and annealed (APE) guides, and in two high index-jump phases,...

  • A new integrable optical modulator-switch optimized for speed and power consumption. Ching So, Lai; Lee, Charles A. // Journal of Applied Physics;9/1/1989, Vol. 66 Issue 5, p2200 

    Presents a study that analyzed a structure of planar waveguide directional coupler/switch composed of gallium arsenide (GaAs)/AlGaAs. Background on the electro-optic directional coupler (EDC)/modulator; Examination of the operational characteristics of the proposed EDC/modulator in the...

  • Traveling wave electro-optic phase modulator using cross-linked nonlinear optical polymer. Wenshen Wang; Datong Chen // Applied Physics Letters;8/22/1994, Vol. 65 Issue 8, p929 

    Demonstrates the fabrication and characterization of a high frequency traveling wave electro-optic phase modulator using cross-linked nonlinear optical polymer. Use of a threelayer structure with an integrated line circuit; Definition of the straight channel optical waveguides; Observation of...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics