TITLE

Induced anisotropy in amorphous SM-Co sputtered films

AUTHOR(S)
Chen, K.; Hegde, H.
PUB. DATE
October 1992
SOURCE
Applied Physics Letters;10/12/1992, Vol. 61 Issue 15, p1861
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the induced anisotropy in amorphous samarium-cobalt films produced by sputter deposition. Lack of hysteresis in the films; Contribution of field annealing to the formation of directional atomic pair ordering; Details on the x-ray diffraction patterns of the film.
ACCESSION #
4221338

 

Related Articles

  • FePtC magnetic recording media with (200) textured MoC intermediate layer. Jai-Lin Tsai; Yun-Ting Tseng; Chia-Ru Li; Sheng-Chun Fu // Journal of Applied Physics;2015, Vol. 117 Issue 17, p17C502-1 

    The FePt films with thickness of 4-10 nm were deposited on MoC/CrRu/glass at 425 °C by using magnetron sputtering. The Mo40C60 target was used to form the MoC and C two phases after deposition. The MoC intermediate layer was epitaxially grown on the (200) textured CrRu seed layer at 425 °C...

  • Nanoprobes for near-field optical microscopy manufactured by substitute-sheath etching and hollow cathode sputtering. Chaigneau, M.; Ollivier, G.; Minea, T.; Louarn, G. // Review of Scientific Instruments;Oct2006, Vol. 77 Issue 10, p103702 

    This article reports a new approach for probe manufacturing, which is the key component in scanning near-field optical microscope (SNOM). The wet-etching process, to create the tip at the apex of a tapered fiber, has been optimized. Typical tip features are short tapers, large cone angles...

  • Reviewing deposition. Ahmed, Waqar // Product Finishing;Jul/Aug2001, Vol. 54 Issue 7, p25 

    Focuses on the benefits of applying cathodic arc deposition to cutting tools despite the presence of microparticles. Problems with the cathodic arc process; Application of the cathodic arc process; Advantage of cathodic arc system over magnetron sputtering.

  • A novel thin film dispenser cathode for thermionic emission. Zavadil, K. R.; King, D. B.; Ruffner, J. A. // AIP Conference Proceedings;2001, Vol. 552 Issue 1, p1165 

    A thin film dispenser or micro-dispenser cathode can be generated using standard RF sputtering deposition technology. These films are compositionally modulated structures based on W and a multi-component Ba oxide. Annealing to temperatures from 900 to 1300 K results in Ba reduction, transport...

  • Physical Vapor Deposition Processes. Mattox, Donald M. // Products Finishing;Sep2001, Vol. 65 Issue 12, p72 

    Explains the different types of physical vapor deposition (PVD) processes and their advantages and disadvantages. Information on the PVD processes; Function of substrate fixturing; Description of physical sputtering; Common form of ion plating.

  • 40 years ago in Electronic Design. Scrupski, Steve; Schiff, Debra // Electronic Design;10/22/98, Vol. 46 Issue 24, p64F 

    Recalls two practical circuit design-ideas. Solution for accepting and delivering a known and constant rf frequency despite any input frequency changes; Use of cathode metal sputtering in producing precision circuits.

  • Electrophysical properties of dielectric films in MDM-structures. Danilina, T. I.; Troyan, P. E. // Russian Physics Journal;Apr2010, Vol. 53 Issue 4, p331 

    Using the methods of reactive cathode sputtering in a low-voltage, penning-discharge installation, dielectric films from silica, silicon nitride, aluminum nitride, etc. are obtained. Parameters of the films in MDM structures, their optical properties and porosity are investigated as a function...

  • Electrolyte-as-Cathode Glow Discharge Emission and the Processes of Solution-to-Plasma Transport of Neutral and Charged Species. Maksimov, A. I.; Titov, V. A.; Khlyustova, A. V. // High Energy Chemistry;May/Jun2004, Vol. 38 Issue 3, p196 

    Emission from an atmospheric-pressure glow discharge with alkali metal chloride solutions used as the cathode was studied. The relation between the discharge emission and the cathode sputtering process leading to the transfer of solution components to the plasma zone was analyzed. It was assumed...

  • Single crystal aluminum deposit formation on isotropic substrates by means of self-organized ion sputtering. Perekrestov, V. I.; Kornyushchenko, A. S.; Kosminskaya, Yu. A. // Technical Physics Letters;Oct2006, Vol. 32 Issue 10, p868 

    A substantially new technological approach is considered, which is based on the self-organized formation of aluminum single crystal layer on isotropic substrates in the course of stationary condensation of reverse diffusion fluxes in a planar de magnetron. The functional possibilities of...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics