Asymmetric dual GeSi/Si Bragg mirror and photodetector operating at 632 and 780 nm

Murtaza, S.S.; Campbell, J.C.
August 1994
Applied Physics Letters;8/15/1994, Vol. 65 Issue 7, p795
Academic Journal
Investigates the fabrication of germanium silicide/silicon Bragg mirror by asymmetric-dual mirror design. Enumeration of twin peak magnitudes; Relationship between mirror absorption and refractive index step; Properties of the dual photodetector.


Related Articles

  • Linear capacitive displacement sensor with frequency readout. Fritsch, Klaus // Review of Scientific Instruments;May87, Vol. 58 Issue 5, p861 

    A simple, inherently linear technique for measuring changes in the separation of the mirrors of an optical cavity is reported. The capacitor made up of the reflective metallic coatings is part of a feedback loop which adjusts the frequency of an oscillator to be proportional to the mirror...

  • Output-coupling semiconductor saturable absorber mirror. Spu¨hler, G. J.; Reffert, S.; Haiml, M.; Moser, M.; Keller, U. // Applied Physics Letters;4/30/2001, Vol. 78 Issue 18, p2733 

    We present a semiconductor saturable absorber mirror (SESAM), which also acts as an output coupler at the same time. The influence of the output coupler transmission onto the absorber parameters is investigated theoretically, as well as experimentally. A passively Q-switched Nd:YVO[sub 4]...

  • Two-photon absorption in semiconductor saturable absorber mirrors. Thoen, E.R.; Koontz, E.M. // Applied Physics Letters;6/28/1999, Vol. 74 Issue 26, p3927 

    Investigates the nonlinear reflectivity of semiconductor saturable absorber mirrors as a function of incident energy fluence. Confirmation of the presence of two-photon absorption via time-resolved differential reflectivity measurements.

  • Suspension last stages for the mirrors of the V irgo interferometric gravitational wave antenna Bernardini, A.; Majorana, E.; Puppo, P.; Rapagnani, P.; Ricci, F.; Testi, G. // Review of Scientific Instruments;Aug1999, Vol. 70 Issue 8, p3463 

    Describes the design of the last stage suspension for the mirrors of the Virgo gravitational wave detector and its key mechanical elements. Mechanical and electromagnetic components; Mechanical design and characterization; Electromagnetic actuators; Experimental measurements on the assembled...

  • simplehuman Sensor Mirror Now Available On Sephora.com, Retail Stores To Follow.  // Sensors;7/18/2014, p1 

    The article previews the Sephora sensor-activated vanity mirror from simplehuman.

  • Stop-cleaved InGaAsP lasers for monolithic optoelectronic integration. Antreasyan, A.; Chen, C. Y.; Logan, R. A. // Applied Physics Letters;5/15/1985, Vol. 46 Issue 10, p921 

    We report a novel technique for locally cleaving the mirrors of semiconductor lasers without cleaving the entire substrate. The stop-cleaving technique involves the etching of holes on a substrate prior to the conventional cleaving procedure. The presence of the hole prevents the propagation of...

  • Electric field response of a semiconductor superlattice optical mirror from electroreflectance spectra. Fritz, I. J.; Gourley, P. L.; Drummond, T. J. // Applied Physics Letters;9/25/1989, Vol. 55 Issue 13, p1324 

    We report low-field electroreflectance (ER) spectra of an all-semiconductor multilayer optical mirror structure. The structure, consisting of alternating blocks of AlAs/Al0.5Ga0.5 As and Al0.5Ga0.5As/GaAs multiple quantum well layers, was grown by molecular beam epitaxy without wafer rotation....

  • Use of semiconductor detector for measurement of high energy end loss ions from a tandem mirror. Saito, T.; Sakakibara, M.; Kiwamoto, Y.; Tatematsu, Y.; Yoshimura, Y.; Ichimura, M.; Tamano, T. // Review of Scientific Instruments;Mar97, Vol. 68 Issue 3, p1433 

    Discusses the use of a semiconductor detector for the measurement of high energy end loss ions from a tandem mirror. Calibration of energy sensitivity to protons; Use of a monochromatic ion source found to be the same as that to electrons; Spread of the energy end loss ions with time; Unknown...

  • Quarter-wave Bragg reflector stack of InP-In0.53Ga0.47As for 1.65 μm wavelength. Deppe, D. G.; Gerrard, N. D.; Pinzone, C. J.; Dupuis, R. D.; Schubert, E. F. // Applied Physics Letters;1/22/1990, Vol. 56 Issue 4, p315 

    Quarter-wave semiconductor mirrors of InP-In0.53Ga0.47As for high reflectivity at 1.65 μm wavelength are epitaxially grown using metalorganic chemical vapor deposition. Doping of the In0.53Ga0.47As layers is found to be critical for high reflectivity at wavelengths corresponding to the...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics