Laser-driven synthesis of nanocrystalline alumina powders from gas-phase precursors

Borsella, E.; Botti, S.
September 1993
Applied Physics Letters;9/6/1993, Vol. 63 Issue 10, p1345
Academic Journal
Applies carbon dioxide laser synthesis from gaseous precursors to produce nanosized alumina particles. Use of trimethylaluminum and nitrous-oxide as gas phase reactants; Application of ethylene as sensitizer gas; Composition of synthesized nanocrystalline alumina powder.


Related Articles

  • Preparation of porous alumina using CO2 laser firing of amorphous powder synthesized by chemical solution deposition. Ono, S.; Masuo, Y. // Journal of Materials Science;Jul2004, Vol. 39 Issue 13, p4367 

    Presents a letter to the editor on the preparation of porous alumina using carbon dioxide laser filing of amorphous powder synthesized by chemical solution deposition.

  • Laser-induced resonant excitation of ethylene molecules in C2H4/C2H2/O2 reactions to enhance diamond deposition. Ling, H.; Sun, J.; Han, Y. X.; Gebre, T.; Xie, Z. Q.; Zhao, M.; Lu, Y. F. // Journal of Applied Physics;Jan2009, Vol. 105 Issue 1, p014901 

    Vibrational resonant excitation of ethylene (C2H4) molecules using a carbon dioxide laser was employed to promote reactions in precursors of ethylene, acetylene (C2H2), and oxygen to enhance diamond deposition. One of the vibrational modes (CH2 wag mode, v7) of the C2H4 molecules was selected to...

  • Absorption of 9.6 μm CO2 laser beam by nitrous oxide. Goswami, Priyalakshmi; Barua, A. Gohain // Indian Journal of Science & Technology;Aug2012, Vol. 5 Issue 8, p3174 

    Absorption of a 9.6μm CO2 laser beam by the near-infrared absorption lines of nitrous oxide vapour is studied using the quasi-random model of molecular band absorption. Values of transmittance, computed at intervals of 0.05 cm-1 are obtained for two different absorber thicknesses. The...

  • CO laser high-speed crack-free cutting of thick-section alumina based on close-piercing lapping technique. Yan, Yinzhou; Ji, Lingfei; Bao, Yong; Chen, Xiaochuan; Jiang, Yijian // International Journal of Advanced Manufacturing Technology;Feb2013, Vol. 64 Issue 9-12, p1611 

    The greatest obstacles encountered in laser cutting of thick-section ceramics are catastrophic fracture and low cutting speed. Close-piercing lapping (CPL) technique has provided a cutting strategy via suppressing the thermal stress development during cutting to achieve crack-free cutting....

  • Selective reduction of NO X in diesel exhaust with hydrocarbons over alumina in NEDC conditions. Nadjar, Ibticem; Trichard, Jean-Michel; Costa, Patrick; Djéga-Mariadassou, Gérald // Topics in Catalysis;May2007, Vol. 42/43 Issue 1-4, p27 

    The selective catalytic reduction (SCR) of NO X assisted by hydrocarbons was investigated on alumina in New European Driving Cycle (NEDC) conditions. The alumina efficiency towards the deNO X process was shown in the temperature range 200–400 °C involving a three-catalytic cycle...

  • Enhanced chemical vapor deposition of diamond by wavelength-matched vibrational excitations of ethylene molecules using tunable CO2 laser irradiation. Ling, H.; Xie, Z. Q.; Gao, Y.; Gebre, T.; Shen, X. K.; Lu, Y. F. // Journal of Applied Physics;Mar2009, Vol. 105 Issue 6, p064901 

    Wavelength-matched vibrational excitations of ethylene (C2H4) molecules using a tunable carbon dioxide (CO2) laser were employed to significantly enhance the chemical vapor deposition (CVD) of diamond in open air using a precursor gas mixture of C2H4, acetylene (C2H2), and oxygen (O2). The...

  • Spatial and temporal studies of laser ablated ZnO plasma. Joshy, N. V.; Saji, K. J.; Jayaraj, M. K. // Journal of Applied Physics;Sep2008, Vol. 104 Issue 5, p053307 

    Gallium doped zinc oxide was ablated using the third harmonics of Nd:YAG laser at various laser fluences and nitrous oxide ambient gas pressures. Optical emission spectroscopic technique was used to determine the plasma parameters. Spatial variation of electron number density (Ne) was determined...

  • New bar cathode system for cw CO2 transversely excited lasers. Kasamatsu, M.; Shiratori, S. // Applied Physics Letters;2/24/1986, Vol. 48 Issue 8, p505 

    A new bar cathode system that is simple and easy to construct was developed. Its characteristics were investigated and compared with a conventional multipin cathode system. The result demonstrated that transversely excited CO2 lasers employing both cathode systems have similar characteristics...

  • Longitudinal mode selection in hybrid CO2 laser for subthreshold operation of cw discharge section. Sinha, Sucharita; Gupta, Pradeep K. // Applied Physics Letters;11/17/1986, Vol. 49 Issue 20, p1331 

    The relative mode intensities in the hybrid CO2 laser output are investigated for subthreshold operation of cw gain section. The rate equation model developed for the purpose provides estimates in very satisfactory agreement with experimental results. The model also predicts the existence of an...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics