Vertical cavity amplifying photonic switch

Raj, R.; Oudar, J.L.
October 1994
Applied Physics Letters;10/31/1994, Vol. 65 Issue 18, p2359
Academic Journal
Examines the vertical cavity amplifying switch (VCAPS) device. Depiction of VCAPS in optically pumped vertical cavity Fabry-Perot structure; Use of amplification configuration to measure carrier induced refractive index change; Functions of vertical cavity structure in laser emission, modulation through asymmetric Fabry-Perot structure.


Related Articles

  • Room temperature spontaneous emission in five-micron-long Fabry–Pérot vertical cavities. Lei, C.; Pinzone, C. J.; Huang, Z.; Huffaker, D. L.; Deppe, D. G.; Dupuis, R. D. // Journal of Applied Physics;4/1/1993, Vol. 73 Issue 7, p3153 

    Presents an analysis of room temperature spontaneous emission in AlGaAs/GaAs Fabry-P é rot vertical cavities with thin GaAs active regions. Calculations of the spontaneous emission characteristics for semiconductor microcavity structures; Facts on the measured transmission spectrum of the...

  • Analysis of negative refraction from anomalous phase in transmission spectrum. Mandatori, A.; Sibilia, C.; Bertolotti, M.; Haus, J. W. // Applied Physics Letters;6/23/2008, Vol. 92 Issue 25, p251117 

    The dependence of the negative refraction of a simple Fabry–Perot system as a function of the sign of material permittivity and permeability is analyzed. It is shown that negative refraction is possible every time the transmission phase of the system shows an anomalous behavior. However...

  • Characterization for metamaterials with a high refractive index formed by periodic stratified metallic wires array. Haofei Shi; Yueguang Lu; Xingzhan Wei; Xiaochun Dong; Chunlei Du // Applied Physics A: Materials Science & Processing;Dec2009, Vol. 97 Issue 4, p799 

    A mechanism for exploiting bulk metamaterials formed by periodic stratified metallic wires array with extremely high refractive index is introduced and the maximum refractive index can be well described and determined by a coupled Bloch wave placed inside the constructed periodic systems. The...

  • A Fabry-Perot imaging primer.  // Sky & Telescope;Jul95, Vol. 90 Issue 1, p21 

    Deals with the use of Fabry-Perot interferometers in astronomy. Measurement of spectra to find Doppler shifts; Blueshifting and redshifting; High-resolution spectroscopy of single emission lines.

  • Reflectance modulator based on tandem Fabry-Perot resonators. Fritz, I.J.; Klem, J.F.; Wendt, J.R. // Applied Physics Letters;8/12/1991, Vol. 59 Issue 7, p753 

    Presents calculations and data on a tunable reflector structure of tandem Fabry-Perot resonators. Features of the single epitaxial device; Significance in the production of double-dipped reflectance spectrum; Implication of the modulation depth for the demonstration device.

  • Highly sensitive NpnP optoelectronic switch by AlAs regrowth. Kuijk, M.; Heremans, P.; Borghs, G. // Applied Physics Letters;7/29/1991, Vol. 59 Issue 5, p497 

    Examines the sensitivity of NpnP optoelectric switching device with low holding power by passivation. Observation of extreme optical sensitivity; Application of light illumination to decrease the breakover voltage; Reduction of surface generation/recombination currents at the edges of the device.

  • Eyesafe pulsed microchip laser using semiconductor saturable absorber mirrors. Fluck, R.; Ha¨ring, R.; Paschotta, R.; Gini, E.; Melchior, H.; Keller, U. // Applied Physics Letters;6/22/1998, Vol. 72 Issue 25 

    We passively Q-switched a diode-pumped Er/Yb:glass microchip laser at a 1.535 μm wavelength using semiconductor saturable absorber mirrors and demonstrated pulses as short as 1.2 ns. By varying the design parameters of the saturable absorber, the pump power, and the pump spot size, we...

  • A sensitive interferometric accelerometer. Stephens, M. // Review of Scientific Instruments;Sep93, Vol. 64 Issue 9, p2612 

    An interferometric accelerometer developed for use in characterizing isolation systems for gravitational wave detectors is described. A Nd:YAG laser is frequency locked to a Fabry-Pérot cavity in which one mirror is flexibly mounted. At 100 Hz the displacement sensitivity is 1.0 × 10[sup...

  • Control of long-term output frequency drift in commercial dye lasers. Lindsay, B. G.; Smith, K. A.; Dunning, F. B. // Review of Scientific Instruments;Jun91, Vol. 62 Issue 6, p1656 

    A simple technique using a scanning confocal Fabry-Perot etalon and a stabilized helium-neon laser is described that can be used to correct the long-term drift in output frequency of actively stabilized commercial dye lasers. Using this technique the long-term drift in the ultraviolet output...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics