TITLE

New method for fabricating ultra-narrow metallic wires

AUTHOR(S)
Olson, E.; Spalding, G.C.
PUB. DATE
November 1994
SOURCE
Applied Physics Letters;11/21/1994, Vol. 65 Issue 21, p2740
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Investigates the fabrication of ultra-narrow metallic wires. Use of the cryogenic shadowed evaporation technique; Application to palladium wires; Range of wire widths.
ACCESSION #
4203879

 

Related Articles

  • Continuous Tube Forming of the Ta Diffusion Barrier and Cu Stabilizer on Internal-Nb3Sn Subelement. Fu, X.; Gregory, E.; Mclntyre, P. M.; Smith, D.; Tomsic, M. // AIP Conference Proceedings;2004, Vol. 711 Issue 1, p382 

    ATC is developing a new strategy for the large-scale manufacture of high-performance Nb3Sn superconducting wire. One element of that strategy is to use a continuous tube forming process to apply a Ta diffusion barrier and Cu stabilizer onto the drawn subelements prior to restack. The motivation...

  • Progress on the Use of Internal Fins as Barriers to Reduce Magnetization on High Current Density Mono Element Internal Tin Conductors (MEIT). Zeitlin, Bruce A.; Gregory, Eric; Pyon, Taeyoung; Scanlan, R. M.; Polyanskii, Anatolii A.; Lee, Peter J. // AIP Conference Proceedings;2004, Vol. 711 Issue 1, p417 

    A number of configurations of a mono element internal tin conductor (MEIT) were fabricated to explore the effect of internal fins on the effective filament size (Deff) and its effect on wire processing. A current density of 2.85 × 109 A/m2 (12 T) was achieved in a high tin, high Nb...

  • Variable-Temperature Critical-Current Measurements on a Nb-Ti Wire. Goodrich, L. F.; Stauffer, T. C. // AIP Conference Proceedings;2004, Vol. 711 Issue 1, p338 

    We made variable-temperature critical-current (Ic) measurements on a commercial multifilamentary Nb-Ti wire for temperatures (T) from 4 to 9 K and magnetic fields (H) from 0 to 11.5 T using transport current. The measurements cover the whole range of critical currents from less than 0.1 A to...

  • Multifilament Superconducting Wire Based on NbTi Alloy in a Combined Copper/Copper-Nickel Matrix. Vedernikov, G. P.; Shikov, A. K.; Potanina, L. V.; Gubkin, I. N.; Scherbakova, O. V.; Salunin, N. I.; Korpusov, V. U.; Novikov, S. I.; Novikov, M. S. // AIP Conference Proceedings;2004, Vol. 711 Issue 1, p330 

    Model fine filament superconducting 0.65 mm wire based on NbTi alloy, intended for operating in fields having sweep rate from 1 up to 4 T/s, has been developed and manufactured by Bochvar Institute (VNIINM). The wire was fabricated by a single stacking method. Each filament was surrounded by a...

  • Comparison of the Properties and Microstructure of Niobium-47Titanium Superconductors with Magnetic and Non-Magnetic Island Pinning Centers. Motowidlo, L. R.; Rudziak, M. K.; Wong, T.; Cooley, L. D.; Lee, P. J. // AIP Conference Proceedings;2004, Vol. 711 Issue 1, p322 

    We have investigated Nb-47Ti multifilament wire with 12 volume percent artificial pinning centers (APC). The superconducting properties of APC wires containing either ferromagnetic nickel pins with a copper barrier or non-magnetic copper pins are compared. The optimum diameter for these pins is...

  • A Sol-Gel Approach to the Insulation of Rutherford Cables. Buta, F.; Hascicek, Y. S.; Sumption, M. D.; Arda, L.; Aslanoglu, Z.; Akin, Y.; Collings, E. W. // AIP Conference Proceedings;2004, Vol. 711 Issue 1, p273 

    Two wind-and-react compatible variants for the electrical insulation of Rutherford cables by a sol-gel route have been investigated. The first variant involves the direct application of a sol-gel coating of SnO2-ZrO2 to the surface of the strands in the cable, whereas the second is an indirect...

  • Switchable wiring for high-resolution electronic measurements at very low temperatures. Schirm, C.; Pernau, H.-F.; Scheer, E. // Review of Scientific Instruments;Feb2009, Vol. 80 Issue 2, pN.PAG 

    Low-temperature transport measurements with high energy resolution require effective filtering of high-frequency input. The high dc resistance of standard RC filters results in considerable heat input and hampers measurements with high currents or voltages. We developed a wiring scheme that...

  • A 3.5 Tesla Laboratory Electromagnet. Pooke, D. M.; Chamritski, V.; Gibson, S.; Fee, M.; King, T.; Staines, M. P.; Flower, N. E.; Buckley, R. G. // AIP Conference Proceedings;2004, Vol. 710 Issue 1, p817 

    We report the design and construction of a laboratory electromagnet utilizing HTS coils in an iron yoke with a magnetic flux density of 3.5 Tesla in a 50-mm air-gap. With continuing improvement in the performance of HTS “BSCCO” wire, several niche HTS magnet applications have become...

  • The CRESST Dark Matter Search. Seidel, W.; Bravin, M.; Bruckmayer, M.; Bucci, C.; Cooper, S.; DiStefano, P.; Feilitzsch, F. V.; Frank, T.; Jochum, J.; Keeling, R.; Kraus, H.; Loidl, M.; Marchese, J.; Meier, O.; Meunier, P.; Nagel, U.; Pergolesi, D.; Pr�bst, F.; Ramachers, Y.; Schnagl, J. // Physics of Atomic Nuclei;Jul2000, Vol. 63 Issue 7, p1242 

    We discuss the short- and long-term perspectives of the CRESST (Cryogenic Rare Event Search using Superconducting Thermometers) project and present the current status of the experiment and new results concerning detector development. In the search for elementary particle dark matter, CRESST is...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics