TITLE

Formation mechanism of TiC by mechanical alloying

AUTHOR(S)
Liu, Z.G.; Guo, J.T.
PUB. DATE
November 1994
SOURCE
Applied Physics Letters;11/21/1994, Vol. 65 Issue 21, p2666
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Investigates the synthesis of titanium carbide (TiC) by mechanical alloying (MA). Features of TiC formation; Implication of the initial milling stage for the incubation duration of the reaction; Importance of MA in highly exothermic alloy systems.
ACCESSION #
4203853

 

Related Articles

  • Effect of Dispersed TiC Content on the Microstructure and Thermal Expansion Behavior of Shrouded-Plasma-Sprayed FeAl/TiC Composite Coatings. Tian, Li-Hui; Li, Cheng-Xin; Li, Chang-Jiu; Yang, Guan-Jun // Journal of Thermal Spray Technology;May2012, Vol. 21 Issue 3/4, p689 

    FeAl intermetallic matrix composites reinforced by ceramic particles such as titanium carbide have attracted much attention in recent years. In this study, shrouded plasma spraying with nitrogen as a protective gas was employed to deposit FeAl/TiC composite coatings. Fe-35Al powder and...

  • Microstructures and Properties of Nanocrystalline NiFe Alloy With and Without Particulate TiC Reinforcement by Mechanical Alloying. Shirani Bidabadi, Mohammad; Saidi, Ali; Kasiri, Masoud; Ahmadi Renani, Mohammad; Chami, Akbar // Metallurgical & Materials Transactions. Part A;Oct2013, Vol. 44 Issue 10, p4800 

    In the current study, NiFe alloy powders were prepared using a high-energy planetary ball mill. The effects of TiC addition (0, 5, 10, 20, and 30 wt pct) and milling time on the sequence of alloy formation, the microstructure, and microhardness of the product were studied. The structure of solid...

  • SPARK PLASMA SINTERING OF NOVEL COPPER BASED METAL MATRIX COMPOSITES. MORARU, Corina Gabriela; POP, Mihai Alin; BEDO, Tibor; ŞERBAN, Cornel Eugen // Metalurgia;2013, Vol. 65 Issue 6, p38 

    This paper deals with the processing, microstructure, mechanical properties and wear behaviour of copper based hybride composites reinforced with TiC and graphite particles. Elemental powders of copper (Cu), titanium carbide (TiC) and graphite (C) were mechanically alloyed in a planetary ball...

  • SPARK PLASMA SINTERING OF NOVEL COPPER BASED METAL MATRIX COMPOSITES. MORARU, Corina Gabriela; POP, Mihai Alin; BEDO, Tibor; ŞERBAN, Cornel Eugen // Metalurgia;2013, Vol. 65 Issue 6, preceding p5 

    This paper deals with the processing, microstructure, mechanical properties and wear behaviour of copper based hybride composites reinforced with TiC and graphite particles. Elemental powders of copper (Cu), titanium carbide (TiC) and graphite (C) were mechanically alloyed in a planetary ball...

  • PROBLEMS ENCOUNTERED WITH MICROWAVE SINTERING OF COPPER BASED METAL MATRIX COMPOSITES. MORARU, Corina Gabriela; POP, Mihai Alin; BEDO, Tibor // Metalurgia;2013, Vol. 65 Issue 8, preceding p5 

    This study deals with the processing of Cu-TiC-graphite hybrid composites prepared by powder metallurgy route, through mechanical alloying and microwave sintering. Microwave sintering has gained worldwide acceptance as a new method for heating and sintering of a variety of materials as it offers...

  • Simultaneous synthesis of TiB2-TiC nanocomposites through MASHS method and investigation of activation of the raw materials on this process. Aminikia, Behzad // AIP Conference Proceedings;9/6/2012, Vol. 1476 Issue 1, p17 

    In this research TiB2-TiC Nanocomposite was fabricated by SHS of mechanically milled powders. Ti and B4C as starting materials were milled for 1, 3 and 6 h then pressed to form pellets. Green compacts were placed in a tube furnace which had been preheated to 1200 °C in argon atmosphere, for...

  • The Influence of Cylindrical Grinding Medium on Particle Size and Mechanical Properties of TiC Steel Bonded Carbide. Guoping Li; Wen Chen; Lihui Sun; Haishen Sun; Fenghua Luo // Materials Science Forum;2016, Vol. 849, p781 

    Ball milling is an efficient way to produce TiC steel bonded carbide. In addition to the use of alloy steel ball, a certain amount of cylindrical object are used for grinding medium and the content is 0, 15%, 30%, 50%, 100% of the total grinding body, respectively. The results show that average...

  • Role of mechanical activation in SHS synthesis of TiC. Maglia, F.; Anselmi-Tamburini, U.; Deidda, C.; Delogu, F.; Cocco, G.; Munir, Z. A. // Journal of Materials Science;Aug2004, Vol. 39 Issue 16/17, p5227 

    The effect of the mechanical activation of the reactants on the self-propagating high-temperature synthesis (SHS) of titanium carbide was investigated. The SHS experiments were performed on two compositions, Ti50C50 and Ti70C30, which define the homogeneity range of the TiC equilibrium carbide....

  • The influence of a metalloid on ordered structure in titanium carbide. Tashmetov, M. Yu.; Em, V. T.; Savenko, B. N. // Physics of the Solid State;Dec97, Vol. 39 Issue 12, p1968 

    X-ray and neutron diffraction were used to investigate the effect of oxygen and nitrogen atoms on the formation of the intermediate d'-cubic (sp. gr. Fd3 m) and d'-tetragonal (sp. gr. P3[sub 1]21) ordered structures in titanium carbide. In TIC[sub 0.545]O[sub 0.08], TiC[sub 0.545]N[sub 0.09]...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics