Electronic and mechanical properties of carbon nitride films prepared by laser ablation

Zhong-Min Ren; Yuan-Cheng Du
September 1994
Applied Physics Letters;9/12/1994, Vol. 65 Issue 11, p1361
Academic Journal
Prepares carbon nitride films using laser ablation graphite under nitrogen ion bombardment. Existence of carbon-nitrogen bonds in the films using Raman shift; Observation of the presence of paracyanogen-like materials using time-of-flight measurements; Characterization of the crystal properties of the obtained films.


Related Articles

  • Secondary electrons generated by fast neutral bombardment of the growing film during laser.... Brongersma, S.H.; Kools, J.C.S.; Baller, T.S.; Beijerinck, H.C.W.; Dieleman, J. // Applied Physics Letters;9/9/1991, Vol. 59 Issue 11, p1311 

    Examines the time-of-flight measurements on the films produced during excimer laser ablation of titanium nitride by fast neutral bombardment. Number of ions produced in the ablation process; Magnitude of the positive current due to secondary electrons.

  • Focused ion beam fabrication of single grain Bi[sub 2]Sr[sub 2]Ca[sub 1]Cu[sub 2]O[sub x].... Zitkovsky, I.D.; Qing Hu; Orlando, T.P.; Melngailis, J.; Tao Tao // Applied Physics Letters;8/5/1991, Vol. 59 Issue 6, p727 

    Demonstrates the patterning of superconducting microbridges by direct milling of bismuth strontium cadmium copper oxide polycrystalline thin films using focused ion beam. Fabrication of single grain and multigrain bridges of sizes; Display of linear temperature dependence of single grain...

  • Deposition of large area YBa[sub 2]Cu[sub 3]O[sub 7] superconducting films by laser scanning.... Song, W.D.; An, C.W. // Applied Physics Letters;12/13/1993, Vol. 63 Issue 24, p3370 

    Presents a method of laser scanning ablation for producing large area YBa[sub 2]Cu[sub 3]O[sub 7] superconducting films. Effectiveness of the laser scanning ablation method; Measurement of critical current density; Use of x-ray diffraction for c-axis orientation of the films.

  • C-axis preferred orientation of laser ablated epitaxial PbTiO[sub 3] films and their electrical.... Tabata, Hitoshi; Murata, Osamu; Kawai, Tomoji; Kawai, Shichio; Okuyama, Masanori // Applied Physics Letters;1/24/1994, Vol. 64 Issue 4, p428 

    Demonstrates the formation of preferential c-axis oriented lead titanate oxide (PbTiO[sub 3]) epitaxial films using pulsed laser ablation. Description of the electric and pyroelectric behavior of PbTiO[sub 3] films; Display of clear and large ferroelectric hysteresis loops films; Pyroelectric...

  • Low-temperature film growth of Si by reactive ion beam deposition. Yamada, Hiroshi; Torii, Yasuhiro // Applied Physics Letters;2/16/1987, Vol. 50 Issue 7, p386 

    A new low-temperature film formation technique is proposed. It uses ionized species produced by an electron cyclotron resonance-type microwave ion source with reactive gases and controlled in the low ion energy region, less than about 500 eV. Good quality homoepitaxial films on Si(111) are...

  • Characteristics of carbon nitride films synthesized by single-source ion beam enhanced.... Zhaocu Wu; Yuehui Yu // Applied Physics Letters;2/26/1996, Vol. 68 Issue 9, p1291 

    Investigates the synthesis of carbon nitride films by single source ion beam enhanced deposition system. Characteristics of carbon nitride films; Analysis of nitrogen concentration and film composition by Rutherford backscattering technique; Relationship between tetrahedrally bonded phase...

  • Electronic and optical properties of carbon nitride thin films synthesized by laser ablation... Lu, Y.F.; Ren, Z.M.; Song, W.D.; Chan, D.S.H. // Journal of Applied Physics;8/15/1998, Vol. 84 Issue 4, p2133 

    Focuses on the deposition of the carbon nitride thin films by the 532 nm Nd: YAG laser ablation of graphite, which was assisted by a nitrogen ion beam bombardment on silicon substrates. Reference to the use of the different nitrogen ion beam energies (200, 400, and 600 e V); Performance of the...

  • Temporal pulse manipulation and ion generation in ultrafast laser ablation of silicon. Spyridaki, M.; Koudoumas, F.; Tzanetakis, P.; Fotakis, C.; Stoian, R.; Rosenfeld, A.; Hertel, I. V. // Applied Physics Letters;8/18/2003, Vol. 83 Issue 7, p1474 

    The possibility of phase manipulation and temporal tailoring of ultrashort laser pulses provides new opportunities for optimal processing of materials. An experimental demonstration of the technique that shows the possibility to design excitation sequences tailored with respect to the material...

  • Pulsed laser deposition of hexagonal and cubic boron nitride films. Reisse, G.; Weissmantel, S. // Applied Physics A: Materials Science & Processing;1999, Vol. 69 Issue 7, pS749 

    Abstract. Hexagonal and cubic boron nitride films are deposited by pulsed laser ablation from a boron nitride and a boron target using a KrF excimer laser. Hexagonal films are deposited in nitrogen as background gas or with nitrogen/argon ion bombardment at ion-to-arriving-target-atom (I/A)...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics