Laser-deposited PrGaO[sub 3] films on SrTiO[sub 3] substrates and in
Related Articles
- Nature of in situ superconducting film formation. Ying, Q. Y.; Kim, H. S.; Shaw, D. T.; Kwok, H. S. // Applied Physics Letters;9/4/1989, Vol. 55 Issue 10, p1041
The resistivity of a Y-Ba-Cu-O film was monitored during laser deposition in real time. Both deposition parameters leading to in situ films and those requiring high-temperature (850 °C) post-annealing were examined. It was found that in both cases, the resistivity was dependent on the oxygen...
- Plasma plume characteristics and properties of pulsed laser deposited diamond-like carbon films. Haverkamp, J.; Mayo, R. M.; Bourham, M. A.; Narayan, J.; Jin, C.; Duscher, G. // Journal of Applied Physics;3/15/2003, Vol. 93 Issue 6, p3627
Pulsed laser deposition is a unique technique for the deposition of hydrogen-free diamond-like carbon films. During deposition, amorphous carbon is evaporated from a solid target by a high-energy KrF laser, ionized, and ejected as a plasma plume. The plume expands outwards and deposits the...
- Nature of the pulsed laser process for the deposition of high Tc superconducting thin films. Venkatesan, T.; Wu, X. D.; Inam, A.; Jeon, Y.; Croft, M.; Chase, E. W.; Chang, C. C.; Wachtman, J. B.; Odom, R. W.; di Brozolo, F. Radicati; Magee, C. A. // Applied Physics Letters;10/10/1988, Vol. 53 Issue 15, p1431
The pulsed laser thin-film deposition process can enable preparation of thin films of complex composition with good control over the film stoichiometry. The film compositions are similar to that of the target pellet and as a consequence this technique appears to be an ideal method for preparing...
- Pulsed laser deposition of oriented In[sub 2]O[sub 3] on (001) InAs, MgO, and yttria-stabilized.... Tarsa, E.J.; English, J.H.; Speck, J.S. // Applied Physics Letters;5/10/1993, Vol. 62 Issue 19, p2332
Investigates the growth of oriented In[sub 2]O[sub 3] films on indium arsenide, magnesium oxide and yttria-stabilized zirconia substrate using pulsed laser deposition. Use of in situ reflection high energy electron diffraction and x-ray diffraction analysis; Resistivity and Hall mobility of the...
- Synthesis of (BiPb)[sub 2]Sr[sub 2]Ca[sub 2]Cu[sub 3]O[sub 10] superconducting thin films on MgO.... Sajjadi, Amin; Boyd, Ian W. // Applied Physics Letters;12/13/1993, Vol. 63 Issue 24, p3373
Examines the synthesis of (BiPb)[sub 2]Sr[sub 2]Ca[sub 2]Cu[sub 3]O[sub 10] superconducting films on magnesium oxide substrate using multilayered pulse laser deposition method. Use of lead oxide target to dope lead into the films; Effect of post-annealing temperature on phase formation; Use of...
- Growth of epitaxial Al[sub x]Ga[sub 1-x]N films by pulsed laser deposition. Huang, Tzu-fang; Harris, James S. // Applied Physics Letters;3/9/1998, Vol. 72 Issue 10
Epitaxial Al[sub x]Ga[sub 1-x]N films have been grown on c-cut sapphire substrates at 800 °C and 10[sup -2] Torr N[sub 2] by pulsed laser deposition (PLD) using a KrF laser. Throughout the composition range from x=0 to 0.6, the films show epitaxial patterns in reflection high-energy electron...
- Characterization of Y-Ba-Cu-O thin films and yttria-stabilized zirconia intermediate layers on.... Reade, R.P.; Mao, X.L.; Russo, R.E. // Applied Physics Letters;8/5/1991, Vol. 59 Issue 6, p739
Investigates the use of an intermediate layer for the growth of yttrium barium copper oxide (YBCO) thin films on polycrystalline metallic alloys for tape conductor applications. Development of pulsed laser deposition process; Application of different growth conditions; Deposition of YBCO thin...
- Investigation of dead-layer thickness in SrRuO[sub 3]/Ba[sub 0.5]Sr[sub 0.5]TiO[sub 3]/Au thin-film capacitors. Sinnamon, L. J.; Bowman, R. M.; Gregg, J. M. // Applied Physics Letters;3/19/2001, Vol. 78 Issue 12, p1724
Thin-film capacitors, with barium strontium titanate (BST) dielectric layers between 7.5 and 950 nm in thickness, were fabricated by pulsed-laser deposition. Both crystallography and cation chemistry were consistent with successful growth of the BST perovskite. At room temperature, all...
- Growth-related stress and surface morphology in homoepitaxial SrTiO[sub 3] films. Tarsa, E.J.; Hachfeld, E.A. // Applied Physics Letters;1/22/1996, Vol. 68 Issue 4, p490
Examines the lattice parameter and surface morphology of homoepitaxial strontium titanate films. Growth of homoepitaxial layers using pulsed laser deposition; Cause of the increase in the surface roughness of the films; Mismatch between film and substrate.
