Uncooled high-speed InSb field-effect transistors

Ashley, T.; Dean, A.B.
January 1995
Applied Physics Letters;1/23/1995, Vol. 66 Issue 4, p481
Academic Journal
Examines the fabrication of thin-film depletion-mode metal-insulator-semiconductor-field-effect transistor. Presence of static dynamic range in transistors; Indication of intrinsic cut-off frequency in parasitic capacitances; Determination of the static electron mobility from magnetoresistance measurements.


Related Articles

  • Negative transconductance in a resistive gate metal-semiconductor field-effect transistor. Yin, Y.; Cooper, J. A.; Neudeck, P. G.; Balzan, M. L.; Geissberger, A. E. // Applied Physics Letters;5/8/1989, Vol. 54 Issue 19, p1884 

    Negative transconductance is reported in a resistive gate metal-semiconductor field-effect transistor (MESFET) for the first time. The negative transconductance arises as a result of the negative differential mobility of electrons in the GaAs channel, and is adequately described by a simple...

  • Depletion width measurement in an organic Schottky contact using a metal-semiconductor field-effect transistor. Takshi, Arash; Dimopoulos, Alexandros; Madden, John D. // Applied Physics Letters;8/20/2007, Vol. 91 Issue 8, p083513 

    Although the capacitance measurement is a common method to obtain the depletion width in a Schottky contact, the method is challenging in an organic Schottky junction since the capacitance is a combination of the capacitances associated with the trapped charges, bulk semiconductor, and the...

  • Improved Parameter Extraction Technique for Small Signal MESFET/HEMTs Model. Sharma, Prachi; Abbasi, Tanveer Ahmad; Kumar, Ashish; Singh, Kulwant // IUP Journal of Science & Technology;Dec2011, Vol. 7 Issue 4, p7 

    A simplified approach to extract the small-signal parameters of GaAs High Electron Mobility Transistors (HEMTs) is presented. For the extraction of parameters, Hot- Cold method is used. A fast and accurate method is presented to obtain the extrinsic and intrinsic parameters from measured...

  • Fabrication of metal-epitaxial insulator-semiconductor field-effect transistors using molecular beam epitaxy of CaF2 on Si. Smith, T. P.; Phillips, Julia M.; Augustyniak, W. M.; Stiles, P. J. // Applied Physics Letters;1984, Vol. 45 Issue 8, p907 

    Fabrication of metal-epitaxial insulator-semiconductor field-effect transistors by molecular beam epitaxial growth of CaF2 on Si is reported for the first time. These devices have a room-temperature electron mobility of 300 cm2/Vs and a threshold voltage of 0.5 V. The breakdown voltage of the...

  • High-performance AlGaN/GaN lateral field-effect rectifiers compatible with high electron mobility transistors. Chen, Wanjun; Wong, King-Yuen; Huang, Wei; Chen, Kevin J. // Applied Physics Letters;6/23/2008, Vol. 92 Issue 25, p253501 

    A high electron mobility transistor (HEMT)-compatible power lateral field-effect rectifier (L-FER) with low turn-on voltage is demonstrated using the same fabrication process as that for normally off AlGaN/GaN HEMT, providing a low-cost solution for GaN power integrated circuits. The power...

  • 1/f noise in all-epitaxial metal-semiconductor diodes. Young, A. C.; Zimmerman, J. D.; Brown, E. R.; Gossard, A. C. // Applied Physics Letters;2/13/2006, Vol. 88 Issue 7, p073518 

    In contrast to traditional metal-semiconductor (i.e., Schottky) junctions, molecular beam epitaxy (MBE)-grown ErAs:InAlGaAs heterojunctions have recently been shown to provide highly “engineerable” electrical rectification characteristics through the tuning of the Schottky barrier...

  • BANDWIDTH IMPROVEMENT OF A SINGLE-STAGE DISTRIBUTED AMPLIFIER. Amrani, F.; Trabelsi, M.; Aksas, R.; Azrar, A. // Microwave Journal;May2010, Vol. 53 Issue 5, p112 

    The article discusses the use of bandwidth to improve single-stage distributed amplifier with the use of a Chebyshev polynomial to express the transducer power gain. It states that the conventional distributed amplifiers are formed by artificial transmissions and conventional single-stage...

  • Overview of Microwave Device Modeling Techniques Based on Machine Learning. Zhenfei Zhao; Youtian Qu; Yanhua Zhang; Xuewen Shen // International Journal of Advancements in Computing Technology;May2013, Vol. 5 Issue 9, p299 

    This paper overviews the microwave device modeling techniques based on machine learning. The proposed methods are divided into two categories, active and passive components modeling. These modeling techniques aim to characterize the microwave device efficiently and accurately. The active...

  • DC and RF Characteristics of SiC MESFETs with Different Channel Doping Concentrations Under the Gate. Razavi, S. M.; Orouji, Ali A.; Hosseini, Seyed Ebrahim; Moghadam, Hamid Amini // International Review of Physics;Jun2011, Vol. 5 Issue 3, p116 

    A Silicon carbide (SiC) metal semiconductor field effect transistor (MESFET) with step doping under the gate is proposed. The channel under the gate is divided into two Source Side (SS) and Drain Side (DS) regions with the same lengths and thicknesses, but with different doping levels. Changes...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics