Multifunctional probe microscope for facile operation in ultrahigh vacuum

Howald, L.; Meyer, E.
July 1993
Applied Physics Letters;7/5/1993, Vol. 63 Issue 1, p117
Academic Journal
Describes the scanning force/tunneling microscope for remote controlled operation in ultrahigh vacuum. Suspension of probe microscope by four rings; Use of laser diodes as light sources; Selection of three scans in different operating modes.


Related Articles

  • A scanning force microscope with atomic resolution in ultrahigh vacuum and at low temperatures Allers, W.; Schwarz, A.; Schwarz, U.D.; Schwarz, U. D.; Wiesendanger, R. // Review of Scientific Instruments;Jan1998, Vol. 69 Issue 1, p221 

    Designs a scanning force microscope for operation at low temperature in an ultrahigh vacuum system. Utilization of fiber interferometer detection mechanism; Implication for atomic scale imaging with in situ cantilever and sample exchange; Transfer mechanism of microscope into cryostat.

  • Scanning force microscope and vacuum chamber for the study of ice films: Design and first results Bluhm, H.; Pan, S.H.; Pan, S. H.; Xu, L.; Inoue, T.; Ogletree, D.F.; Ogletree, D. F.; Salmeron, M. // Review of Scientific Instruments;Apr98, Vol. 69 Issue 4, p1781 

    Presents the design of a scanning force microscope and vacuum chamber for the growth and imaging of ice thin films. Temperature measurements in a controlled water vapor phase atmosphere; Morphology and frictional properties of thin ice films on mica cleavage faces; Evidence for a...

  • A low temperature ultrahigh vacuum scanning force microscope. Hug, Hans J.; Stiefel, B.; van Schendel, P.J.A.; Mosser, A.; Martin, S. // Review of Scientific Instruments;Sep99, Vol. 70 Issue 9, p3625 

    Describes the design of a versatile ultrahigh vacuum (UHV) low temperature scanning force microscope system. System design; UHV system; Magnet system; Measurements.

  • Piezoresistive cantilevers utilized for scanning tunneling and scanning force microscope in ultrahigh vacuum. Giessibl, F. J.; Trafas, B. M. // Review of Scientific Instruments;Jun94, Vol. 65 Issue 6, p1923 

    Piezoresistive cantilevers have been utilized in a novel ultrahigh vacuum scanning probe microscope which allows in situ scanning tunneling microscopy (STM), contact atomic force microscopy (AFM), and noncontact atomic force microscopy. The instrument uses interchangeable tungsten tips (for STM...

  • Ultrahigh vacuum scanning force microscope with fiber-optic deflection sensor... Kracke, B.; Damaschke, B. // Review of Scientific Instruments;Aug1996, Vol. 67 Issue 8, p2957 

    Describes a scanning force microscope working in ultrahigh vacuum. Presentation of first in situ measurements of thin gold films grown on muscovite mica; Measurement of lever deflection using a fiber-optic interferometer; Implementation of a stepper motor with gear reduction system for coarse...

  • A cryogenic scanning force microscope for the characterization of frozen biological samples. Müller, J.H.; Schwarz, U.D.; Wepf, R.; Wiesendanger, R. // Applied Physics A: Materials Science & Processing;2003, Vol. 76 Issue 6, p893 

    We present the design of a new scanning force microscope specially suited for the investigation of soft matter, particularly biological, in an ultrahigh vacuum. The key point is that the samples are immobilized by shock freezing in order to maintain their native structure before they are...

  • Improvement of a dynamic scanning force microscope for highest resolution imaging in ultrahigh vacuum. Torbrügge, S.; Lübbe, J.; Tröger, L.; Cranney, M.; Eguchi, T.; Hasegawa, Y.; Reichling, M. // Review of Scientific Instruments;Aug2008, Vol. 79 Issue 8, p083701 

    We report on a modification of a commercial scanning force microscope (Omicron UHV AFM/STM) operated in noncontact mode (NC-AFM) at room temperature in ultrahigh vacuum yielding a decrease in the spectral noise density from 2757 to 272 fm/√Hz. The major part of the noise reduction is...

  • Digitally tunable, wide-band amplitude, phase, and frequency detection for atomic-resolution scanning force microscopy. Khan, Z.; Leung, C.; Tahir, B. A.; Hoogenboom, B. W. // Review of Scientific Instruments;Jul2010, Vol. 81 Issue 7, p073704 

    Frequency-modulation atomic force microscopy (FM-AFM) relies on an accurate tracking of the resonance frequency of a scanning probe. It is now used in environments ranging from ultrahigh vacuum to aqueous solutions, for slow and for fast imaging, with probes resonating from a few kilohertz up to...

  • Three-Dimensional Force Field Spectroscopy. Schwarz, Alexander; Holscher, Hendrick; Langkat, S. M.; Wiesendanger, R. // AIP Conference Proceedings;2003, Vol. 696 Issue 1, p68 

    A method is presented that utilizes the frequency modulation technique in ultra-high vacuum to measure the tip-sample force field in all three dimensions with atomic resolution. It is based on a systematic procedure to record frequency shift versus distance curves. After their conversion into...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics