Features of gold having micrometer to centimeter dimensions can be formed through a combination

Kumar, Amit; Whitesides, George M.
October 1993
Applied Physics Letters;10/4/1993, Vol. 63 Issue 14, p2002
Academic Journal
Demonstrates a lithographic method for the fabrication of patterns of gold supported on silicon substrates. Methods used to pattern a self-assembled monolayer on a supported gold film; Problems of the method; Advantages of the lithographic method.


Related Articles

  • Towards attomolar detection using a surface-enhanced Raman spectroscopy platform fabricated by nanosphere lithography. Wallace, Gregory Q.; Tabatabaei, Mohammadali; Lagugné-Labarthet, François // Canadian Journal of Chemistry;Jan2014, Vol. 92 Issue 1, p1 

    The limit of detection of 4-nitrothiophenol adsorbed onto the surface of a platform fabricated by nanosphere lithography is investigated by surface-enhanced Raman spectroscopy. Critical factors such as the functionalization time and the change of sharpness of the gold nanostructures upon...

  • “Seedless” vapor-liquid-solid growth of Si and Ge nanowires: The origin of bimodal diameter distributions. Dailey, Eric; Drucker, Jeff // Journal of Applied Physics;Mar2009, Vol. 105 Issue 6, p064317 

    We identify a previously uncharacterized vapor-liquid-solid growth mode that can produce small diameter, epitaxial <110> oriented Si and Ge nanowires (NWs). Disilane or digermane pyrolysis evolves H2 causing the monolayer thick Au/Si(111) layer between three dimensional Au seeds to dewet and...

  • Electrical characterization and modeling of the Au/CaF2/nSi(111) structures with high-quality tunnel-thin fluoride layer. Vexler, M. I.; Sokolov, N. S.; Suturin, S. M.; Banshchikov, A. G.; Tyaginov, S. E.; Grasser, T. // Journal of Applied Physics;Apr2009, Vol. 105 Issue 8, p083716 

    Au/CaF2/nSi(111) structures with 4–5 monolayers of epitaxial fluoride are fabricated and electrically tested. The leakage current in these structures was substantially smaller than in similar samples reported previously. Simulations adopting a Franz-type dispersion relation with Franz...

  • Gold surface with sub-nm roughness realized by evaporation on a molecular adhesion monolayer. Mahapatro, Ajit K.; Scott, Adina; Manning, Allene; Janes, David B. // Applied Physics Letters;4/10/2006, Vol. 88 Issue 15, p151917 

    This letter describes a technique for realizing a gold (Au) surface with roughness at the atomic scale using techniques compatible with integrated device fabrication. The Au layer is electron-beam evaporated on a self-assembled monolayer of (3-Mercaptopropyl) trimethoxysilane on an oxidized...

  • Ultraviolet lithography of self-assembled monolayers for submicron patterned deposition. Friebel, Susanne; Aizenberg, Joanna; Abad, Silvia; Wiltzius, Pierre // Applied Physics Letters;10/9/2000, Vol. 77 Issue 15 

    We report on a lithographic technique that uses self-assembled monolayers (SAMs) as a resist to fabricate patterned, chemically functionalized surfaces. Large area line, square, and triangular patterns with a periodicity of 532 nm were generated exposing SAMs of hydrophobic or hydrophilic...

  • Single-electron tunneling study of two-dimensional gold clusters. Wang, Bing; Bing Wang; Xiao, Xudong; Xudong Xiao; Huang, Xianxiang; Xianxiang Huang; Sheng, Ping; Ping Sheng; Hou, J. G. // Applied Physics Letters;8/21/2000, Vol. 77 Issue 8 

    By using scanning tunneling microscopy/spectroscopy, we have studied the current-voltage characteristics of two-dimensional (2D) Au clusters, thermally deposited on self-assembled alkanethiol monolayer. The curves display Coulomb blockade and staircase with asymmetric behavior. The measured zero...

  • Ultrahigh-vacuum multitechnique study of AuCN monolayers on Au(111) formed by electrochemical deposition. Yamada, Taro; Sekine, Rika; Sawaguchi, Takahiro // Journal of Chemical Physics;7/15/2000, Vol. 113 Issue 3 

    The two kinds of monolayers of AuCN electrodeposited on Au(111), indexed (1.15x&sqrt;3R-30°) and (1.41x2&sqrt;3R-30°), have been subjected to x-ray and ultraviolet photoelectron spectroscopy (XPS, UPS) and high resolution electron energy loss spectroscopy (HREELS) as well as low energy...

  • Optoelectronic properties of hydrogenated amorphous silicon films grown using a modified pulsed.... Mukherjee, C.; Anandan, C. // Applied Physics Letters;1/8/1996, Vol. 68 Issue 2, p194 

    Examines the use of modified pulse plasma in depositing hydrogenated amorphous silicon films. Influence of the deposition conditions on the optoelectronic properties of hydrogenated amorphous silicon; Use of pulse powered discharges in tailoring material properties; Effects of plasma switching...

  • Influence of a pre-deposited carbon submonolayer on the Ge island nucleation on Si(001). Dentel, D.; Bischoff, J. L.; Kubler, L.; Stoffel, M.; Castelein, G. // Journal of Applied Physics;5/1/2003, Vol. 93 Issue 9, p5069 

    Si surfaces manipulated by a carbon (C) pre-deposition have been used to modify the growth morphology of Ge islands. In situ reflection high-energy electron diffraction and x-ray photoelectron diffraction and ex situ atomic force microscopy studies have been conducted for constant C seeding and...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics