Microwave-assisted three-dimensional multilayer magnetic recording

Winkler, G.; Suess, D.; Lee, J.; Fidler, J.; Bashir, M. A.; Dean, J.; Goncharov, A.; Hrkac, G.; Bance, S.; Schrefl, T.
June 2009
Applied Physics Letters;6/8/2009, Vol. 94 Issue 23, p232501
Academic Journal
Layer-selective writing of two layer bit patterned media is demonstrated by performing micromagnetic finite element simulations. Selectivity is achieved by controlling the frequency of an oscillating magnetic field in the gigahertz range, applied in addition to the head field. Generation of the microwave field by means of a wire next to the tip of a single pole head is proposed. The Oersted field from the alternating current induces magnetic oscillations in the pole tip which create a high frequency field that is superimposed to the perpendicular write field. The amplitude of the ac field component is in the order of 0.1 T.


Related Articles

  • Finite element study of the effect of permeable media on longitudinal writer field calculations. Zhou, Yuming; Giusti, Jim; Fernandez-de-Castro, Juan // Journal of Applied Physics;5/15/2003, Vol. 93 Issue 10, p7014 

    The effect of permeable media on writer field calculations was examined in this study via a finite element analysis in which the nonlinear characteristics of both the writer and the permeable media were represented. The applied field of the writer was calculated for the two cases: one without a...

  • Frequency multiplying behavior in a magnetoelectric unimorph. Zhang, Wenhui; Yin, Ge; Cao, Jiangwei; Bai, Jianmin; Wei, Fulin // Applied Physics Letters;1/16/2012, Vol. 100 Issue 3, p032903 

    We observe frequency multiplying behavior in a magnetoelectric (ME) unimorph: such a frequency-multiplied signal is generated when the input frequency (fin) of an alternating current magnetic field (Hac) is around 1/n (n denotes integer) of the mechanical resonance frequency (fr) of the device....

  • Electromagnetic properties of polytetrafluoroethylene at microwave frequencies using finite element modeling waveguide adapter. Soleimani, Hassan; Yahya, Noorhana; Soleimani, Hojjatollah; Sadrolhosseini, Amir R. // AIP Conference Proceedings;Sep2012, Vol. 1482 Issue 1, p122 

    Experimental and theoretical approaches were shown great potential to determine electromagnetic properties of dielectric materials at microwave frequencies. In this study, the application of Finite Element Modeling (FEM) of waveguide adapter was utilized to investigate the distribution of...

  • Experimental and finite-element method studies of the effects of ferromagnetic substrate on the total ac loss in a rolling-assisted biaxially textured substrate YBa2Cu3O7 tape exposed to a parallel ac magnetic field. Nguyen, Doan N.; Ashworth, Stephen P.; Willis, Jeffrey O. // Journal of Applied Physics;Nov2009, Vol. 106 Issue 9, p093913-1 

    This paper presents a study of the total ac loss characteristics of a rolling-assisted biaxially textured substrate (RABiTS) YBa2Cu3O7 (YBCO) sample exposed to a parallel ac magnetic field. The results have shown that, for a given applied magnetic field and transport current, a RABiTS YBCO tape...

  • Study of AC Loss Characteristics of HTS-coated Conductor with Magnetic Substrate Using FEM Analysis. Miyagi, Daisuke; Yamashita, Satoshi; Takahashi, Norio; Tsukamoto, Osami // Journal of Superconductivity & Novel Magnetism;Feb2011, Vol. 24 Issue 1/2, p43 

    high- T superconducting (HTS)-coated conductor with a magnetic substrate is promising as a low-cost conductor because Ni alloy can be well texturized by a simple process. However, it has been reported that the magnetism of the substrate makes an AC transport current loss and an AC magnetization...

  • Theoretical model of twisted high T... superconducting tapes for numerical alternating-current... Banno, N.; Amemiya, N. // Journal of Applied Physics;4/15/1999 Part 1 of 2, Vol. 85 Issue 8, p4243 

    Focuses on a study which developed a theoretical model of twisted multifilamentary superconducting tapes for numerical estimations of alternating-current losses. Theoretical model for electromagnetic analysis; Application of model to finite element analysis; Conclusion.

  • Three-dimensional finite-element analysis of recording heads. Lowther, D. A.; Coughlin, T. M. // Journal of Applied Physics;4/15/1988, Vol. 63 Issue 8, p3375 

    Presents a three-dimensional finite-element analysis of recording heads. Comparison of three-dimensional and two-dimensional results for a particular head; Advantage of the two-dimensional analysis; Magnitude display over the surface body.

  • Coupled Magnetic Field and Thermal Analysis of Synchronous Generator. Deepak Arumugam; Premalatha Logamani // Australian Journal of Basic & Applied Sciences;Feb2014, Vol. 8 Issue 2, p124 

    Background: In general the synchronous generator by means of rectifier amalgamation is appropriate for extensive high promptness claims like excitation scheme of large electrically powered generators, Aircrafts, Shipboard and sub marine power system and high power DC supplies. Predetermined...

  • Simulations and Experiments on Electromagnetic Induction Separator by excitation variation. Nour El Islam, Ayad Ahmed; Abdelgani, Ayad; Youcef, Ramdani; Yann Le Bihan; Krebs, Guillaume; Dey Zouaoui // Australian Journal of Basic & Applied Sciences;Jan2014, Vol. 8 Issue 1, p351 

    Magnetic separators have been used for many years to recover ferrous metal from scrap. However in the process of recovery, a mixture of nonferrous metallic and nonmetallic material remains. The separation technique is the best known for this purpose, and was mostly confined to the recovery of...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics