TITLE

LASER STRUCTURING: Interconnection circuits

AUTHOR(S)
Métayer, Pascal; Lagrange, Jacquelot-Damien
PUB. DATE
May 2009
SOURCE
Industrial Laser Solutions;May2009, Vol. 24 Issue 5, p17
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
The article reports on the use of laser beam for producing electrical patterns. It states that laser micromachining and laser ablation offers a high flexibility of use and well-suited for fast prototyping. The result of combining the technologies of precision grinding of ceramics and laser ablation of metallized thin-film layers is discussed.
ACCESSION #
41141267

 

Related Articles

  • Pulsed laser ablation and deposition of silicon. Yap, Seong Shan; Salomatova, Alesya Viktorovna; Ladam, Cécile; Dahl, Øystein; Reenaas, Turid Worren // Applied Physics A: Materials Science & Processing;Dec2010, Vol. 101 Issue 4, p765 

    KrF laser was used to ablate a polycrystalline Si target for deposition of Si on MgO and GaAs substrates at room temperature. The deposition was performed in 10 mbar, with two types of laser beams: a homogeneous beam being imaged onto the target (2.9 J/cm), and a non-homogeneous which is nearly...

  • Material ablation and plasma plume expansion study from Fe and graphite targets in Ar gas atmosphere. Mahmood, S.; Rawat, R. S.; Springham, S. V.; Tan, T. L.; Lee, P. // Applied Physics A: Materials Science & Processing;Dec2010, Vol. 101 Issue 4, p695 

    Study of expansion dynamics of pulsed-laser ablation plasmas from Fe and graphite targets is presented. A 532 nm Q-switched Nd:YAG laser with fluence of 30 J cm is used to ablate the Fe and graphite targets in various Ar ambient gas pressures. Plasma ablation parameters for the two target...

  • Ablation of molecular solids under nanosecond laser pulses: The role of inertial confinement. Perez, Danny; Lewis, Laurent J.; Lorazo, Patrick; Meunier, Michel // Applied Physics Letters;10/2/2006, Vol. 89 Issue 14, p141907 

    The thermal routes to ablation in molecular solids having a long (micron scale) optical penetration depth are investigated under nanosecond laser pulses using a two-dimensional molecular-dynamics model. The authors demonstrate that the mechanisms of matter removal are mainly determined by the...

  • Efficiency of silicon micromachining by femtosecond laser pulses in ambient air. Hwang, David J.; Grigoropoulos, Costas P.; Choi, Tae Y. // Journal of Applied Physics;4/15/2006, Vol. 99 Issue 8, p083101 

    Femtosecond lasers have proven to be effective tools for precise micromachining. Taking advantage of the reduced heat diffusion and the sharp ablation threshold at comparatively low energy densities, subdiffraction limit sized craters have been machined on silicon wafers by single near infrared...

  • Using short-pulse lasers for micromachining. Schaeffer, Ronald D.; Kardos, Gabor; Murphy, Scott; Grossman, David // Industrial Laser Solutions;Dec2008, Vol. 23 Issue 12, p9 

    The article focuses on the usage of shorter laser pulses in micromachining. It mentions that wavelength dependence is more important at long pulse lengths and as the pulse lengths get shorter, the wavelength dependence is minimized. It notes that successful micromachining of a material requires...

  • New mask design approach for UV laser micromachining to reduce stitching errors. Mutapcic, Emir; Iovenitti, Pio; Hayes, Jason // International Journal of Advanced Manufacturing Technology;Oct2009, Vol. 43 Issue 1/2, p95 

    This paper describes a new approach to mask design as well as a new pulsed laser micromachining strategy referred to as “Common Nest” (CN) to reduce stitching errors, need for programming offsets, and alignment problems. The CN mask design approach breaks down a microchannel pattern...

  • Temporal measurements of photofragment attenuation at 248 nm in the laser ablation of polyimide in air. Koren, G. // Applied Physics Letters;4/20/1987, Vol. 50 Issue 16, p1030 

    A 248-nm laser pulse of 35 ns duration was split spatially into two beams: a strong beam used to completely ablate in a single pulse 1000- and 5000-Ã…-thick polyimide films on fused silica substrates, and a weak, time-delayed probe beam directed almost perpendicularly onto the sample through...

  • CO2 Laser Beam - Biological Tissue Interaction with Reference to Ablation. Coutouly, J.-F.; Deprez, P.; Breaban, F.; Longuemard, J.-P. // Lasers in Engineering (Old City Publishing);2009, Vol. 19 Issue 3/4, p213 

    Laser ablation of biological materials (human or animal tissues) is of definite interest. For example companies working in the food-processing industry wish to cut or clean animal material in conditions of optimum hygiene. In this area, lasers can an extremely interesting alternative. This paper...

  • Laser Processing Mechanism of Monocrystalline Diamond. Ohmura, Etsuji; Harano, Katsuko; Watatani, Kenichi; Ebata, Keiji // Journal of Mechanics Engineering & Automation;2011, Vol. 1 Issue 3, p191 

    When a Nd:YAG laser, the wavelength of which is permeable for diamond, is focused on the surface of a diamond sample, a layer of surface material is ablated. Therefore, diamond can be cut by repetitive irradiation. In this study, the processing mechanism of ablation for a single crystal diamond...

Share

Read the Article

Courtesy of

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics