TITLE

Thermal expansion of RuFe alloys and its relationship to the high pressure phase of Fe

AUTHOR(S)
Qadri, Syed B.; Keller, Teddy M.; Laskoski, Matt; Skelton, E. F.; Husz, A.; Mahadik, N. A.
PUB. DATE
April 2009
SOURCE
Applied Physics Letters;4/27/2009, Vol. 94 Issue 17, p171907
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Ru1-xFex alloys crystallize in a hexagonal-close-packed structure for x<0.70 with a space group of P63/mmc, the same phase as that of a high pressure phase of iron, [variant_greek_epsilon]-Fe. Thermal expansion coefficients of Ru1-xFex alloys of various compositions were determined over a temperature range of 300–530 K using high resolution x-ray diffraction measurements. The coefficients of linear thermal expansion for hexagonal phase along the c and a axes showed a linear dependence on the composition. These results when extrapolated showed direct relationship to the thermoelastic properties of [variant_greek_epsilon]-Fe. This study also demonstrates that high pressure and high temperature phases can be simulated and engineered to exist at ambient conditions with proper choice of alloying.
ACCESSION #
38712347

 

Related Articles

  • Creation of submicrocrystalline structure and improvement of functional properties of shape memory alloys of the Ti-Ni-Fe system with the help of ECAP. Prokoshkin, S.; Belousov, M.; Abramov, V.; Korotitskii, A.; Makushev, S.; Khmelevskaya, I.; Dobatkin, S.; Stolyarov, V.; Prokof�ev, E.; Zharikov, A.; Valiev, R. // Metal Science & Heat Treatment;Jan2007, Vol. 49 Issue 1/2, p51 

    The structure and mechanical and functional properties of shape memory alloys of the Ti-Ni-Fe system are studied by methods of x-ray diffraction analysis, transmission electron microscopy, and mechanical and thermomechanical testing. The alloys are subjected to high-temperature thermomechanical...

  • Effect of nitrogen on the structural and magnetic properties of intermetallic compounds with the ThMn12 structure. Wang, Y. Z.; Hadjipanayis, G. C. // Journal of Applied Physics;11/15/1991, Vol. 70 Issue 10, p6009 

    Focuses on the effects of nitrogen uptake on the structural and magnetic properties of iron-neodymium, samarium- titanium, vanadium alloys. Change in the character of magnetic anisotropy; Overview of the x-ray diffraction patterns of the alloy; Means to derive the saturation magnetization data.

  • Lattice constants and thermal expansion of AlxGa1-xAs:Te. Bak-Misiuk, J.; Leszczynski, M.; Domagala, J.; Zytkiewicz, Z. // Journal of Applied Physics;12/15/1995, Vol. 78 Issue 12, p6994 

    Presents a study which examined an influence of tellurium doping on the lattice parameter and the thermal expansion of Al[subx]Ga[sub1-x]As epitaxial layers by high resolution x-ray diffractometry. Details on the lattice constant of a semiconductor; Possibility to change the free-electron...

  • Thermal expansivity, bulk modulus, and melting curve of H2O–ice VII to 20 GPa. Fei, Yingwei; Mao, Ho-kwang; Hemley, Russell J. // Journal of Chemical Physics;10/1/1993, Vol. 99 Issue 7, p5369 

    Equation of state properties of ice VII and fluid H2O at high pressures and temperatures have been studied experimentally from 6 to 20 GPa and 300–700 K. The techniques involve direct measurements of the unit-cell volume of the solid using synchrotron x-ray diffraction with an externally...

  • Study of Carbide Evolution During Thermo-Mechanical Processing of AISI D2 Tool Steel. Bombac, D.; Fazarinc, M.; Podder, A.; Kugler, G. // Journal of Materials Engineering & Performance;Mar2013, Vol. 22 Issue 3, p742 

    The microstructure of a cold-worked tool steel (AISI D2) with various thermo-mechanical treatments was examined in the current study to identify the effects of these treatments on phases. X-ray diffraction was used to identify phases. Microstructural changes such as spheroidization and...

  • Effect of Thermomechanical Processes on Twin Roll Casted Magnesium Alloy Sheets. Duygulu, Ozgur; Ucuncuoglu, Selda; Secgin, Gizem Oktay // Materials Science Forum;2014, Vol. 783-786, p369 

    6 mm thick and 1500 mm wide magnesium alloy AZ3l, AZ6l, AZ9l, AM50 and AM60 sheets were produced by twin roll casting technique. Sheets were homogenized between 350-475°C for 1-24 h. AZ3l sheets were rolled down to 1 mm by symmetrical warm rolling and asymmetric warm rolling. Age hardening...

  • Formation of Fe14La2B phase in as-cast and melt-spun samples. Hadjipanayis, G. C.; Tao, Y. F.; Gudimetta, K. // Applied Physics Letters;10/1/1985, Vol. 47 Issue 7, p757 

    The formation of the tetragonal Fe14La2B phase has been examined in both as-cast and melt-spun Fe-La-B alloys using thermal and magnetic techniques together with x-ray diffraction analysis. It is found that this phase exists in both types of alloys and that it is produced by annealing at...

  • Mössbauer studies of GdFe2 − x Hf x alloys. Al-Omari, I. A.; Gismelseed, A.; Widatallah, H.; Elzain, M.; Al-Rawas, A.; Yousif, A. // Hyperfine Interactions;2008, Vol. 187 Issue 1-3, p93 

    GdFe2 − x Hf x alloys, where x = 0, 0.10, 0.15, 0.20, and 0.30, are produced by arc-melting of pure elements. The samples are investigated by x-ray diffraction and Fe57 Mössbauer spectroscopy at 78 K and 300 K. We find that the alloy system GdFe2 − x Hf x have the single phase...

  • Crystallization Behavior Of Cr Substituted Fe-Based Nanocrystalline Alloys. Mahmud, Md. Sultan; Hakim, M. A.; Hoque, S. Manjura; Sikder, S. S.; Gain, Asit Kumar; Nordblad, Per // AIP Conference Proceedings;4/24/2008, Vol. 1003 Issue 1, p55 

    Crystallization behavior has been studied for amorphous alloys Fe73.5-xCrxCu1Nb3Si13.5B9 (0<=x<=17.5) in the form of ribbons prepared by melt-spinning technique by DSC and themomagnetic measurements M(T). The crystallization temperature increases with the increase of Cr content with no sign of...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics