TITLE

Deformation mechanisms and strength in nanoscale multilayer metallic composites with coherent and incoherent interfaces

AUTHOR(S)
Mastorakos, Ioannis N.; Zbib, Hussein M.; Bahr, David F.
PUB. DATE
April 2009
SOURCE
Applied Physics Letters;4/27/2009, Vol. 94 Issue 17, p173114
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We investigate the deformation behavior of bimetallic and trimetallic nanoscale multilayer metallic composites under biaxial loading using molecular dynamics. Three types of structures were studied: (a) Cu–Ni fcc/fcc bilayer, (b) Cu–Nb fcc/bcc bilayer, and (c) Ni–Cu–Nb fcc/fcc/bcc trilayer. A configuration with a dislocation structure inside is generated by initially loading a perfect structure to a high strain to nucleate dislocations, then completely unloading it and loading it again. The comparison between the deformation behavior of bilayer and trilayer structures revealed that the Cu–Ni is more ductile, the Cu–Nb is stronger, and the trilayer structure exhibits both high strength and ductility.
ACCESSION #
38712300

 

Related Articles

  • New method for the evaluation of brittleness in ceramics. Nishi, Yoshitake; Katagiri, Tatsuo; Yamano, Takehide; Kanai, Fumiyuki; Ninomiya, Nobuyuki; Uchida, Satoshi; Oguri, Kazuya; Morishita, Tadae; Endo, Takashi; Kawakami, Mamoru // Applied Physics Letters;5/13/1991, Vol. 58 Issue 19, p2084 

    Suggests plastic deformation as a convenient measurement to determine the ductility (brittleness) of brittle materials, using Vickers indention method. Critical deformation energy of collapse; Effect nucleation and growth mechanisms of a given crack on plastic deformation.

  • The Influence of Cylindrical Inclusions on the Stability of a Directionally Solidified Interface. Hadji, Layachi // Metallurgical & Materials Transactions. Part A;Jul2004, Vol. 35 Issue 7, p2181 

    Discusses the influence of cylindrical inclusions on the stability of solidified interface. Effect of the modification of the thermal gradient on the melt near particle; Use of heat diffusion to develop the physical process of solidified interface; Average size of the reinforcements used in the...

  • Ultrasonic reflectivity technique for the characterization of fiber-matrix interface in metal matrix composites. Matikas, Theodore E.; Karpur, Prasanna // Journal of Applied Physics;7/1/1993, Vol. 74 Issue 1, p228 

    Describes an ultrasonic reflectivity technique for the characterization of fiber-matrix interface in metal matrix composites. Factors that affect the properties of a composite system; Types of existing techniques for the characterization of interfacial behavior in fiber reinforced model...

  • Explosive bonding of plates with diffusion barrier interfaces. Joshi, V. S.; Banks, M. L.; Krebsbach, J. // AIP Conference Proceedings;2000, Vol. 505 Issue 1, p1229 

    Composite plates, with and without, "waves" were made using improved explosive welding techniques. Oriented heat treatment of one surface of a steel-titanium composite introduces brittle intermetallic material at the specific interface. Currently, we are investigating methods to minimize this...

  • Dislocation dynamics analysis of dislocation intersections in nanoscale metallic multilayered composites. Akasheh, F.; Zbib, H. M.; Hirth, J. P.; Hoagland, R. G.; Misra, A. // Journal of Applied Physics;4/15/2007, Vol. 101 Issue 8, p084314 

    In this work, dislocation dynamics (DD) analysis is used to investigate the strength of nanoscale metallic multilayered composites. Several possible interactions between threading (glide) dislocations and intersecting interfacial dislocations are considered and found to lead to strength...

  • Peculiarities of the Mechanical Response of Heterogeneous Materials with Highly Deformable Interfaces. Psakhie, S. G.; Shilko, E. V.; Astafurov, S. V. // Technical Physics Letters;Mar2004, Vol. 30 Issue 3, p237 

    Peculiarities of the deformation and fracture of heterogeneous materials with a large fraction of interfacial regions (interfacial materials) under the action of complex alternating loads have been studied by computer-aided simulation. The dependence of the character of fracture, deformability,...

  • Elastic deformation of Ti films during alternating bending. Shugurov, A. R.; Panin, A. V.; Kazachenok, M. S. // Technical Physics;Nov2010, Vol. 55 Issue 11, p1583 

    The effect of the state of stress at a film-substrate interface on the elastic deformation of Ti films is studied during alternating bending. The Al substrate compliance is shown to cause coherent deformation of the film-substrate system, resulting in the corrugation of a Ti film and the...

  • Friction calibration map for determination of equal frictional conditions. Kaviti, Ajay Kumar; Prakash, Om; Vishwanath, P. // Advances in Applied Science Research;Oct2011, Vol. 2 Issue 5, p279 

    In the metal forming process, a realistic frictional condition must be specified at the die/work piece interface in order to obtain accurate metal flow. Several methods are developed to evaluate friction in large deformation processes. This paper presents the concept of friction calibration map...

  • DNA adsorption at functionalized Si/buffer interfaces studied by x-ray reflectivity. Douarche, C.; Cortès, R.; Henry de Villeneuve, C.; Roser, S. J.; Braslau, A. // Journal of Chemical Physics;Jun2008, Vol. 128 Issue 22, p225108 

    The adsorption of DNA on chemically homogeneous, functionalized, oxide-free single-crystal silicon surfaces is studied by x-ray reflectivity. The adsorption of monodisperse, 294 base-pair double-stranded DNA on a positively charged surface is detected through the deformation of the molecular...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics