TITLE

A clinical technique for bonding gold castings to teeth

AUTHOR(S)
Eakle, W. Stephan; Lacy, Alton M.
PUB. DATE
June 1991
SOURCE
Quintessence International;Jun1991, Vol. 22 Issue 6, p491
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A clinical technique is presented that allows practitioners to use adhesive bonding techniques to improve the retention and seal of gold castings. At the time of delivery of a gold casting, the preparation is treated with a self-curing enamel and dentinal bonding agent. The internal surface of the casting is sandblasted and electroplated with tin to produce a surface suitable for bonding with a resin cement, which is virtually insoluble and is adhesive to both the metal surface and the treated tooth.
ACCESSION #
38698880

 

Related Articles

  • Does Adhesive Resin Application Contribute to Resin Bond Durability on Etched and Silanized Feldspathic Ceramic? Passos, Sheila Pestana; Luiz Felipe Valandro; Amaral, Regina; �zcan, Mutlu; Bottino, Marco Antonio; Kimpara, Estev�o Tomomitsu // Journal of Adhesive Dentistry;2008, Vol. 10 Issue 6, p455 

    Purpose: To assess the effect of adhesive application and aging on the bond durability of resin cement to etched and silanized feldspathic ceramic. Materials and Methods: Twenty blocks (6.4 x 6.4 x 4.8 mm) of feldspathic ceramic (Vita VM7) were produced. The ceramic surfaces were conditioned...

  • Influence of Water Concentration in an Experimental Self-etching Primer on the Bond Strength to Dentin. Lima, Giana da Silveira; Ogliari, Fabrício Aulo; da Silva, Eduardo Oliveira; Ely, Caroline; Flávio Fernando Demarco; Carreño, Neftali Lenin V.; Petzhold, Cesar Liberato; Piva, Evandro // Journal of Adhesive Dentistry;2008, Vol. 10 Issue 3, p167 

    Purpose: To investigate the influence of different water concentrations in the solvents of self-etching primers on microtensile bond strength (μTBS) of an experimental adhesive system. Materials and Methods: Five experimental self-etching primers with 0, 5, 10, 20 and 40 (wt%) water as...

  • Effect of Dentinal Surface Preparation on Bond Strength of Self-etching Adhesives. Yiu, Cynthia K. Y.; Hiraishi, Noriko; King, Nigel M.; Tay, Franklin R. // Journal of Adhesive Dentistry;2008, Vol. 10 Issue 3, p173 

    Purpose: This study examined the effects of cutting dentin with different burs at various speeds on the microtensile bond strength (μTBS) of two self-etching adhesive systems. Materials and Methods: Flat deep dentin surfaces from 50 extracted human third molars were divided into 5 groups (n...

  • Sealing Effectiveness of Etch-and-Rinse vs Self-etching Adhesives After Water Aging: Influence of Acid Etching and NaOCl Dentin Pretreatment. Monticelli, Francesca; Toledano, Manuel; Silva, Ana Simoes; Osorio, Estrella; Osorio, Raquel // Journal of Adhesive Dentistry;2008, Vol. 10 Issue 3, p183 

    Purpose: To determine the marginal leakage of Class V restorations bonded with etch-and-rinse and self-etching adhesives applied after different dentin pretreatments over a maximum storage time of 24 months. Materials and Methods: Standardized mixed Class V cavities (5 mm × 3 mm and 2 mm...

  • Microshear Bond Strength of Resin Bonding Systems to Machinable Ceramic with Different Surface Treatments. Xiangfeng Meng; Yoshida, Keiichi; Atsuta, Mitsuru // Journal of Adhesive Dentistry;2008, Vol. 10 Issue 3, p189 

    Purpose: The bond strength and bond durability of two high-viscosity dual-curing resin luting agents with different surface treatments of ceramic were investigated. Materials and Methods: GN-I machinable ceramic surfaces were treated with 37% phosphoric acid for 30 s (PA), 5% hydrofluoric acid...

  • The Effect of Different Bonding Techniques on Ceramic/Resin Shear Bond Strength. Rüttermann, Stefan; Fries, Lilli; Raab, Wolfgang H.-M.; Janda, Ralf // Journal of Adhesive Dentistry;2008, Vol. 10 Issue 3, p197 

    Purpose: To investigate the effect of different adhesives on the shear bond strength between a feldspathic machinable ceramic and a luting resin. Materials and Methods: Seven groups of 20 ceramic specimens each were machined from Vita Mark II blocs. Their surfaces were uniformly treated with...

  • Retention of cast posts relative to cement selection. Young, H. M.; Chiayi Shen; Maryniuk, G. A. // Quintessence International;May1985, Vol. 16 Issue 5, p357 

    The article presents a research which examines the bond strength of five dental cements including zinc polycarboxylate cement, zinc phosphate cement and resin cement. It is reported that, 5 groups of 8 teeth each were made for the five cements. The quantitative analysis, as reported, shows that...

  • An Investigation of the Interfacial Strengths of Methacrylate Resin-based Glass Fiber Post-Core Buildups. Ferrari, Marco; Goracci, Cecilia; Sadek, Fernanda T.; Monticelli, Francesca; Tay, Franklin R. // Journal of Adhesive Dentistry;2006, Vol. 8 Issue 4, p239 

    Purpose: To assess the microtensile bond strengths of a core composite with two different viscosities, MultiCore Flow (F) and Heavy Body (HB) (Ivoclar-Vivadent), on dentin and glass-fiber posts with methacrylate resin matrices, in combination with three dentin adhesives: Syntac Classic (S),...

  • Dentinal shear bond strength, microleakage, and contraction gap of visible light-polymerized liners/bases. Cooley, Robert L.; Barkmeier, Wayne W. // Quintessence International;Jun1991, Vol. 22 Issue 6, p467 

    The bond strength and microleakage patterns of three light-curing glass-ionomer cement liners/bases (Vitrebond, XR Ionomer, and Zionomer) were evaluated and compared to a fluoride-releasing resin (TimeLine) designed for the same use. Bond strength tests were performed at 24 hours and 7 days. At...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics