TITLE

The fracture resistance of all-ceramic crowns on supporting structures with different elastic moduli

AUTHOR(S)
Scherrer, S. S.; de Rijk, W. G.
PUB. DATE
September 1993
SOURCE
International Journal of Prosthodontics;Sep/Oct1993, Vol. 6 Issue 5, p462
SOURCE TYPE
Academic Journal
DOC. TYPE
journal article
ABSTRACT
This in vitro study evaluated the fracture resistance of all-ceramic crowns as a function of the elastic modulus of the supporting die. All-ceramic crowns were made for dies with three different elastic moduli and two different crown lengths. The occlusal surface was loaded in compression with a 12.7-mm steel ball. The fracture load increased markedly with the increase in elastic modulus. The largest increase was seen when only the occlusal surface of the crown was covered. The characteristic fracture load of the complete-crown restorations was more than double that of the occlusal-cover restorations in the dies with the lowest modulus of elasticity, while for the dies with the highest modulus of elasticity the difference in the characteristic fracture load for the two configurations was not significant.
ACCESSION #
37703231

 

Related Articles

  • Marginal Fit of Machine-Milled Titanium and Cast Titanium Single Crowns. Leong, Dennis; John Chai; Lautenschlager, Eugene; Gilbert, Jeremy // International Journal of Prosthodontics;Sep/Oct1994, Vol. 7 Issue 5, p440 

    Eighteen type IV dental stone dies were fabricated from a metal master die that replicated a tooth prepared to receive a metal ceramic crown. They were divided into three groups according to the type of crowns to be made: (a) machine-milled, spark-eroded titanium crowns (Procera); (b) cast...

  • Clinical Follow-up Study of Ceramic Veneered Titanium Restorations-Three-Year Results. Kaus, Thomas; Pröbster, Lothar; Weber, Heiper // International Journal of Prosthodontics;Jan/Feb1996, Vol. 9 Issue 1, p9 

    Eighty-four titanium restorations having 125 ceramic veneers were placed for 32 patients. One hundred sixteen (93%) of the veneers could be reexamined after 21 to 41 months. Two of the restorations required removal because of a partial veneer loss. A Kaplan-Meier survival analysis was performed,...

  • The CELAY System: A Comparison of the Fit of Direct and Indirect Fabrication Techniques. Siervo, Sandro; Bandettini, Bernardo; Siervo, Paolo; Falleni, Alessandra; Siervo, Raffaele // International Journal of Prosthodontics;Sep/Oct1994, Vol. 7 Issue 5, p434 

    CELAY is a machinable ceramic system that is capable of milling inlays, inlays, and veneers from prefabricated industrial ceramic blocks. Direct intraoral or indirect patterns may be used to make ceramic restorations. Scanning electron microscopy was used to analyze the marginal gap of...

  • Occlusal Wear of Metal-Free Ceramic-Filled Polymer Crowns After 2 Years in Service. Stober, Thomas; Dreyhaupt, Jens; Lehnung, Ute; Rammelsberg, Peter // International Journal of Prosthodontics;2008, Vol. 21 Issue 2, p161 

    Purpose: Improvements in the physical properties of modern composites have led to continuous expansion of their field of application to include extensive, occlusion-bearing posterior restorations and even metal-free polymer crowns. The objective of this clinical study was to investigate the...

  • Surface characterisation of the porcelain veneer crown (I). McClean, John W. // Quintessence International;Oct1979, Vol. 10 Issue 10, p65 

    The article discusses the surface characterisation of the porcelain veneer crown. Sintered diamond stones come in shapes and sizes which are claimed to be available for finishing porcelain. It advices that when grinding porcelain, the crown should always be kept wet through constant immersion in...

  • The Effect of Tooth Preparation Form on the Fit of Procera Copings. Lin, Ming-Tsuen; Sy-Muñoz, Jenny; Muñoz, Carlos A.; Goodacre, Charles J.; Naylor, W. Patrick // International Journal of Prosthodontics;Nov/Dec1998, Vol. 11 Issue 6, p580 

    Purpose: This study evaluated the marginal and internal adaptation of Procera copings using different tooth preparations. The variations comprised 4 finish line forms, 3 occlusal forms, 3 occlusocervical undulation forms to the proximal finish line, and 3 proximal auxiliary retention forms....

  • Implant Treatment in Elderly Patients. Jemt, Torsten // International Journal of Prosthodontics;Sep/Oct1993, Vol. 6 Issue 5, p456 

    A group of 48 patients, all more than 80 years old (mean age 82.7 years) at first implant surgery, who received a total of 254 implants, were followed in one clinical center. Of the exposed implants, 6 of 238 (2.5%) were found to be loose at second-stage surgery, and another 3 implants were lost...

  • Controlled indirect technique for fixed prostheses. Kabcenell, Jack L. // Quintessence International;Aug1988, Vol. 19 Issue 8, p549 

    The article presents a controlled indirect technique for fixed prostheses in dentistry. By the application of these techniques, a lot of chair time and patient discomfort is expected to be reduced while undergoing dental procedures like fitting of a crown or a fixed bridge prior to cementation....

  • Variable Reduced Metal Support for Collarless Metal Ceramic Crowns: A New Model for Strength Evaluation. Lehner, Christian R.; Mannchen, Roland; Scharer, Peter // International Journal of Prosthodontics;Jul/Aug1995, Vol. 8 Issue 4, p337 

    A newly designed specimen allowed strength testing of simulated collarless metal ceramic crowns. The design provided precision replication of specimens having ceramic veneers that were completely supported by metal or that were extended 1 and 2 mm beyond the metal support. Twelve specimens of...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics