TITLE

Chemical Retention of Composite Resin to Metal

AUTHOR(S)
Tenjoma, L. T.; Nicholls, J. I.; Townsend, J. T.; Harper, R. J.
PUB. DATE
January 1990
SOURCE
International Journal of Prosthodontics;Jan/Feb1990, Vol. 3 Issue 1, p78
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Three dental adhesives were used to chemically bond three dental veneering resins to a nickel-chromium alloy and a 52% gold alloy. As a control, all three veneering resins were applied directly to the aluminum-oxide-abraded surface without using an adhesive. The various combinations were subjected to a tensile load, and the tensile bond strength and failure location were recorded. The results indicated that the adhesives provided a statistically significant bond between the resin and the alloys.
ACCESSION #
37702921

 

Related Articles

  • 4-META Opaque Resin--A New Resin Strongly Adhesive to Nickel-Chromium Alloy. TANAKA, T.; NAGATA, K.; TAKEYAMA, M.; ATSUTA, M.; NAKABAYASHI, N.; MASUHARA, E. // Journal of Dental Research;Sep1981, Vol. 60 Issue 9, p1697 

    Opaque resins lacking adhesion and mechanical retention devices are required in positioning crowns; the average bond strength in such cases is 60-70 kg/cm�. An adhesive opaque resin containing 4-methacryloxyethyl trimellitate anhydride was prepared for use with acrylic veneer crowns, and...

  • A comparative analysis of shear bond strength of two veneer composite resins with Ni-Cr alloy subjected to different surface treatments. Sathe, Seema; Parkhedkar, R. D. // Journal of Indian Prosthodontic Society;Mar2007, Vol. 7 Issue 1, p28 

    The aim of this study was to evaluate shear bond strength between the Nickel-Chromium (Ni-Cr) alloy and composite veneer resin after different surface treatments using two different materials. Preparation samples (120) were equally divided into two categories on the basis of resin used: Category...

  • The tensile bond strength of various composite resins to alloy. Xin-Yi Yu; Jun-Wu Xu // Quintessence International;Feb1987, Vol. 18 Issue 2, p145 

    The article reports on a study in which the tensile bond strength of six commercially available adhesive composite resin systems was measured in order to determine whether significant differences exist between the tensile strengths of these products when mixed and manipulated according to the...

  • Physical Properties of a Nickel-Chromium Alloy for Enamel Veneering. LEINFELDER, K. F.; O'BRIEN, W. J. // Journal of Dental Research;Mar1971, Vol. 50 Issue 2, p508 

    The article presents a study which examines the physical properties of a nickel-chromium alloy used in the veneering of dental enamel. The tensile properties of dental restoration casts made from nickel-chromium alloys was tested with an autographic stress-strain recording extensometer. The...

  • Staining of resin-based veneering materials with coffee and tea. Chung Moon Um; Ruyter, I. Eystein // Quintessence International;May1991, Vol. 22 Issue 5, p377 

    Two light-activated, and three heat-polymerized, resin-based veneering materials were exposed to boiled coffee, filtered coffee, or tea at 50 °C and evaluated for color stability. Specimens immersed in distilled water in the dark at 37 °C for 4 months were also assessed. One of the...

  • An evaluation of retention and marginal seating of Ni-Cr alloy cast restorations using three different luting cements: An in vitro study. Pattanaik, Bikash K.; Nagda, S. J. // Indian Journal of Dental Research;Jan/Feb2012, Vol. 23 Issue 1, p20 

    Context: Clinical and laboratory studies regarding performance of recently introduced luting cements: Adhesive resin cement and resin-modified glass ionomer cement (GIC), are limited. Aims: To compare the retention and marginal seating of Ni-Cr alloy restorations using newer luting cements:...

  • Retrospective survey of resin-retained cast-metal palatal veneers for the treatment of anterior palatal tooth wear. Nohl, Francis S. A.; King, Paul A.; Harley, Kathy E.; Ibbetson, Richard J. // Quintessence International;Jan1997, Vol. 28 Issue 1, p7 

    Anterior palatal tooth wear is easily recognized, but its precise pathogenesis remains unknown. Treatment of this condition with cast-alloy palatal veneers used in combination with an adhesive cement is described. Forty-eight patients, aged 11 to 71, were treated with a total of 210 cast metal...

  • The Effect of Cement Volume on Crown Seating. Tan, Ken; Ibbetson, Richard // International Journal of Prosthodontics;Sep/Oct1996, Vol. 9 Issue 5, p445 

    This in vitro study examined the effect of cement volume on the seating of complete crowns. A spaced complete crown was made to fit a nickel-chromium replica mounted in a cementation jig that allowed static and dynamic seating. The crown was luted 10 times for each group using zinc phosphate...

  • DIRECT LAMINATE VENEERS. Knight, Geoffrey M. // Guident;Jun2013, Vol. 6 Issue 7, p14 

    The article deals with the benefits of direct laminate veneers. It notes that the use of direct laminates enable dental clinicians to demand lower fee than indirect procedures which enable more people to access the procedure. Direct laminates also require little if any tooth preparation....

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics