TITLE

Anisotropic properties in Fe–Pt thick film magnets

AUTHOR(S)
Nakano, M.; Shibata, S.; Yanai, T.; Fukunaga, H.
PUB. DATE
April 2009
SOURCE
Journal of Applied Physics;Apr2009, Vol. 105 Issue 7, p07A732
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
As-deposited Fe–Pt thick films prepared by a pulsed laser deposition method with the laser power higher than 5 W had L10 ordered phase without a substrate heating system. As the laser power increased, the properties of the obtained films changed from isotropic to anisotropic ones. It was also confirmed that x-ray diffraction analysis agrees with the anisotropic phenomenon in crystalline structure with increasing laser power.
ACCESSION #
37610725

 

Related Articles

  • Change in the direction of anisotropy in PLD-fabricated Sm-Co thick film magnets. Nakano, M.; Yamaguchi, K.; Yanai, T.; Yamashita, F.; Fukunaga, H. // Journal of Applied Physics;Apr2009, Vol. 105 Issue 7, p07A729 

    Pulsed laser deposition (PLD) method with a substrate heating system enabled us to obtain Sm-Co thick film magnets with the thickness of several ten microns. With increasing a substrate temperature from 673 to 1073 K, the direction of anisotropy changed from in-plane to perpendicular one. The...

  • PLD-fabricated anisotropic Nd–Fe–B thick films with Ga additive. Nakano, M.; Tsutsumi, S.; Yanai, T.; Yamashita, F.; Fukunaga, H. // Journal of Applied Physics;Apr2009, Vol. 105 Issue 7, p07A739 

    In this report, an evaluation on magnetic properties of pulsed laser deposition (PLD)-made anisotropic films with Ga additive was carried out. Coercivity, remanence, and (BH)max values of a film prepared from a Nd2.6Fe14B including Ga target were approximately 850 kA/m, 0.95 T, and 150 kJ/m3,...

  • Enhancement in coercivity of Pulsed Laser Deposition-fabricated Fe-Pt thick film magnets by reducing droplets. Nakano, M.; Urakawa, D.; Yanai, T.; Fukunaga, H. // Journal of Applied Physics;Apr2012, Vol. 111 Issue 7, p07A737 

    A high-speed Pulsed Laser Deposition method with the deposition rate of several ten microns per hour followed by a post-annealing process enabled us to obtain isotropic Fe-Pt thick film magnets with the L10 order phase. In the study, we investigated the relationship between droplets and...

  • Epitaxial growth of γ-CoV2O6 thin films: Structure, morphology, and magnetic properties. Lenertz, M.; Colis, S.; Ulhaq-Bouillet, C.; Dinia, A. // Applied Physics Letters;5/27/2013, Vol. 102 Issue 21, p212407 

    We report on the epitaxial growth of 100 nm thick triclinic γ-CoV2O6 thin films deposited by pulsed laser deposition on TiO2(100) substrate. The layers were grown in narrow experimental conditions, at 600 °C and 0.1 millibar oxygen pressure. X-ray diffraction and transmission electron...

  • Exquisite growth control and magnetic properties of yttrium iron garnet thin films. Chi Tang; Aldosary, Mohammed; Zilong Jiang; Houchen Chang; Madon, Benjamin; Chan, Kyle; Mingzhong Wu; Garay, Javier E.; Jing Shi // Applied Physics Letters;3/7/2016, Vol. 108 Issue 10, p102403-1 

    A layer-by-layer epitaxialgrowth up to 227 atomic layers of ferrimagnetic insulator yttrium irongarnet (YIG) thin films is achieved on (110)-oriented gadolinium gallium garnet substrates using pulsed laser deposition. Atomically smooth terraces are observed on YIG films up to 100?nm in...

  • Effect of Substrates on Superconducting Properties of MgB Thick Films Fabricated by Spraying Method. Ozabaci, M.; Aksan, M. A.; Yakinci, M. E. // Journal of Superconductivity & Novel Magnetism;Feb2011, Vol. 24 Issue 1/2, p357 

    MgB thick films have been prepared on AlO, MgO and SrTiO ceramic substrates using the spray method with two different heat-treatment cycles, 925 °C with 10 min (Group A) and 610 °C with 24 h (Group B). The structural/microstructural (XRD, SEM) and transport (R-T, MR-T) properties of the...

  • High critical-current density with less anisotropy in BaFe2(As,P)2 epitaxial thin films: Effect of intentionally grown c-axis vortex-pinning centers. Hikaru Sato; Hidenori Hiramatsu; Toshio Kamiya; Hideo Hosono // Applied Physics Letters;5/5/2014, Vol. 104 Issue 18, p1 

    We report herein a high and isotropic critical-current density Jc for BaFe2(As,P)2 epitaxial films. The isotropy of Jc with respect to the magnetic-field direction was improved significantly by decreasing the film growth rate to 2.2Ã…/s. The low growth rate served to preferentially align...

  • Pulsed laser deposition conditions and superconductivity of FeSe thin films. Tsukada, A.; Luna, K.; Hammond, R.; Beasley, M.; Zhao, J.; Risbud, S. // Applied Physics A: Materials Science & Processing;Jul2011, Vol. 104 Issue 1, p311 

    We report the effects of growth conditions on the superconducting properties of FeSe films epitaxially grown on LaAlO substrates by pulsed laser deposition (PLD). Customary materials characterization techniques [X-ray diffraction (XRD), in-situ X-ray photoelectron spectroscopy (XPS), in-situ...

  • Effect of silver addition on structural, electrical and magnetic properties of Fe3O4 thin films prepared by pulsed laser deposition. Master, Ridhi; Choudhary, R. J.; Phase, D. M. // Journal of Applied Physics;Apr2012, Vol. 111 Issue 7, p073907 

    The structural, electrical, and magnetic properties of Agx-(Fe3O4)1-x (x = 0, 0.02, 0.10) composite films were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), resistivity as well as magnetization measurements. The samples used in the present work were prepared by...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics