TITLE

Welding Rods and Wires

AUTHOR(S)
Lewis, Sam
PUB. DATE
April 2009
SOURCE
Assembly;Apr2009, Vol. 52 Issue 4, p20
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
The article discusses the welding processes for connecting metal wires and rods to form different structures. Several welding methods are used to join wires, including lap, mash, butt and percussion welding. Mash and butt welding connect wires together by using heat and pressure, while percussion welding uses enough power supply to curved the two wires.
ACCESSION #
37584896

 

Related Articles

  • Support Requirements for Welded-Wire Reinforcement in Slabs. Neuber, Joseph // Concrete International;Sep2006, Vol. 28 Issue 9, p39 

    The article examines proper support spacing for welded-wire reinforcement in slabs. The six common stock styles of welded-wire reinforcement sheets that were tested are listed. Spacing of slab bolster upper bar supports along the 10 ft side of the sheets was varied in 1 ft increments from 6 to 1...

  • RESEARCH ON OBTAINING TUBULAR RODS TYPE Fe-25% Cr-4% W-Ti-La USED FOR CLADDING. STANCIU, G.; ŞERBAN, C. E.; BINCHICIU, E.; MORARU, C. G. // Bulletin of the Transilvania University of Brasov, Series I: Eng;2011, Vol. 4 Issue 2, p93 

    The paper presents research carried out for new materials for flame cladding or WIG welding. These materials contain layers with low dilution and high resistance to abrasion and corrosion combined with intense thermomechanical shock. In the first part of the research the tests for the composite...

  • The Wiring Method of the Transformer AC withstand voltage Test. Li Yan; Wang Qinghao; Wang Enlu; Cong Peiyan; Huang Yuxias; Meng Yu; Liu Chuanbo; Zhang Ning; Li Zhi; Qi Yice // Applied Mechanics & Materials;2014, Issue 543-547, p722 

    This paper briefly expounds the determination of transformer pressure value, and introduces the principles of power frequency ac withstand voltage, variable frequency series resonance withstand voltage and multi-frequency induced withstand voltage. It also expounds the ac withstand voltage...

  • Hurst Boiler Commissions 1st US Poultry Litter-Fueled Boiler.  // Power Engineering;Feb2016, Vol. 120 Issue 2, p5 

    The article reports on the first poultry litter-fueled boiler to be commissioned by the oil and gas supplier Hurst Boiler at the cogeneration facility in Clinton, North Carolina.

  • Research & Development.  // Nuclear Plant Journal;Sep/Oct2013, Vol. 31 Issue 5, p46 

    The article discusses various researches and developments by the Electric Power Research Institute (EPRI) related to nuclear power industry. It states that the Welding & Repair Technology Center of EPRI has been working to develop a welding machine for welding and repairing thinning walls of...

  • Pressure Welding Machines, Ltd. (PWM) U.K. Hall 9 B41.  // Wire Journal International;Feb2012, Vol. 45 Issue 2, p92 

    The article offers information on Pressure Welding Machines Ltd., a participant in the 2012 wire exhibition in Düsseldorf, Germany, which will showcase its energy-efficient and manual powered cold-pressure welders.

  • RESEARCH OF DYNAMIC AND TEMPERATURE INFLUENCE ON THE TENSION IN THE OBJECTS OF HIGH ALTITUDE. Turonoks, Francis; Kiselovs, Valentins; Strautmanis, Guntis // Transport & Engineering;2007, Vol. 24 Issue 7, p167 

    The tension of a brick 100 metres high flue is researched. The influence of the sledge-hammer's external percussive affections is determined. The temperature influence on the probability of the cracking is estimated. The calculation of the flue's constructions according to the carrying capacity...

  • Investigations of acoustoelastic characteristics of rod waves in heat-treated steel wires using the electromagnetic-acoustic method. Murav'ev, V.; Murav'eva, O.; Platunov, A.; Zlobin, D. // Russian Journal of Nondestructive Testing;Aug2012, Vol. 48 Issue 8, p447 

    The main patterns in the propagation of rod waves in steel wires and vicalloy alloy in the as-delivered state and after various annealing temperatures under the conditions of tensile loads were investigated using the electromagnetic-acoustic method.

  • Influence of heat treatment of TRIP steel wire rod on structure and mechanical properties. Pilarczyk, Jan W.; Muskalski, Zbigniew; Golis, Bogdan; Wiewiórowka, Sylwia; Suliga, Maciej; Nickoletopoulos, Nicholas // Wire Journal International;Nov2007, Vol. 40 Issue 11, p80 

    The article examines the effect of heat treatment of TRIP steel wire rod on structure and mechanical properties. According to the authors, the application of accelerated cooling of the wire rod on the Stelmor line yielded a structure composed of a ferrite matrix with pearlite and bainite. They...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics