TITLE

Flow serration and shear-band propagation in bulk metallic glasses

AUTHOR(S)
Chen, H. M.; Huang, J. C.; Song, S. X.; Nieh, T. G.; Jang, J. S. C.
PUB. DATE
April 2009
SOURCE
Applied Physics Letters;4/6/2009, Vol. 94 Issue 14, p141914
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Flow serration in bulk metallic glasses (BMGs) was analyzed using high-sensitivity strain gauges. Based on the displacement-time profile for one serration, shear-band propagating speed was determined and found to be insensitive to the applied strain rates. The disappearance of serration at high strain rates is a result that the signal of displacement burst was overwhelmed by the applied strain rate. In comparison with the ductile Pd-based and brittle Mg-based BMGs, the ductility of BMGs appears to be closely related to the dynamics during shear-band propagation.
ACCESSION #
37580304

 

Related Articles

  • The Self-Organized Critical Behavior in Pd-based Bulk Metallic Glass. Zhong Wang; Jiaojiao Li; Wei Zhang; Junwei Qiao; Baocheng Wang // Metals (2075-4701);2015, Vol. 5 Issue 3, p1188 

    Bulk metallic glasses (BMGs) deform irreversibly through shear banding manifested as serrated-flow behavior during compressive tests. The strain-rate-dependent plasticity under uniaxial compression at the strain rates of 2 × 10-2, 2 × 10-3, and 2 × 10-4·s-1 in a Pd-based BMG is...

  • Investigation of Shrinkage-induced Stresses in Stereolithography Photo-curable Resins. Dimitirs Karalekas; Despina Rapti; Emmanuel E Gdoutos; A Aggelopoulos // Experimental Mechanics;Dec2002, Vol. 42 Issue 4, p439 

    An experimental study has been undertaken to investigate the shrinkage characteristics of acrylic-based and epoxy-based stereolithography (SL) photopolymer resin systems after they have been laser cured and post-cured under ultraviolet (UV), and thermal exposure. The induced residual stresses...

  • Negative strain rate sensitivity in bulk metallic glass and its similarities with the dynamic strain aging effect during deformation. Dalla Torre, Florian H.; Dubach, Alban; Siegrist, Marco E.; Löffler, Jörg F. // Applied Physics Letters;8/28/2006, Vol. 89 Issue 9, p091918 

    Detailed investigations were carried out on the deformation behavior of Zr-based monolithic bulk metallic glass and bulk metallic glass matrix composites. The latter, due to splitting and multiplication of shear bands, exhibits larger compressive strains than the former, without significant loss...

  • Atomic scale characterization of shear bands in an amorphous metal. Qi-Kai Li; Mo Li // Applied Physics Letters;6/12/2006, Vol. 88 Issue 24, p241903 

    The shear bands in a model amorphous CuZr metallic glass are examined using atomistic simulations. The localized shear zones are characterized at atomic scales by the nearest-neighbor atomic bond rotation angle, the nearest-neighbor atomic bond length, the atomic volume, and the potential...

  • Shear band melting and serrated flow in metallic glasses. Georgarakis, K.; Aljerf, M.; Li, Y.; LeMoulec, A.; Charlot, F.; Yavari, A. R.; Chornokhvostenko, K.; Tabachnikova, E.; Evangelakis, G. A.; Miracle, D. B.; Greer, A. L.; Zhang, T. // Applied Physics Letters;7/21/2008, Vol. 93 Issue 3, p031907 

    Scanning electron microscopy observations of shear steps on Zr-based bulk metallic glasses show direct evidence of shear band melting due to heat generated by elastic energy release. The estimated range of attained temperatures and the observed morphologies are consistent with shear steps...

  • Internal stresses of deformation origin in bulk metallic glasses of the Pd-Cu-Ni-P system. Afonin, G.; Khonik, S.; Kaloyan, A.; Khonik, V. // Physics of the Solid State;Nov2012, Vol. 54 Issue 11, p2150 

    The effective internal shear stresses arising during unloading of bulk Pd-Cu-Ni-P metallic glasses deformed under conditions of homogeneous flow below the glass transition temperature T have been determined using measurements of the torque relaxation. It has been shown that the level of...

  • On the origin of elastic strain limit of bulk metallic glasses. Ding, J.; Cheng, Y. Q.; Ma, E. // Applied Physics Letters;1/6/2014, Vol. 104 Issue 1, p011912-1 

    All bulk metallic glasses exhibit a large and almost universal elastic strain limit. Here, we show that the magnitude of the yield strain of the glass state can be quantitatively derived from a characteristic property of the flow state typical in running shear bands (the root cause of yielding)....

  • Shear Band Patterns in Metallic Glasses under Static Indentation, Dynamic Indentation, and Scratch Processes. Subhash, Ghatu; Hongwen Zhang // Metallurgical & Materials Transactions. Part A;Dec2007, Vol. 38 Issue 12, p2936 

    The deformation structure in terms of shear band patterns in bulk metallic glasses (BMGs) under static indentation, dynamic indentation, and dynamic scratch tests has been investigated. The evolved shear band patterns appear to be a strong function of loading rate, although the plastic regions...

  • Shear banding instabilities in amorphous solids: Predicting the yield strain. Dasgupta, Ratul; Hentschel, H. George E.; Joy, Ashwin; Procaccia, Itamar // AIP Conference Proceedings;Feb2013, Vol. 1518 Issue 1, p162 

    We present a short review of the theory of shear localization which results in shear bands in amorphous solids. As this is the main mechanism for the failure of metallic glasses, understanding the instability is invaluable in finding how to stabilize such materials against the tendency to shear...

Share

Read the Article

Courtesy of your local library

Public Libraries Near You (See All)
Looking for a Different Library?

Other Topics