TITLE

In vitro influence of Carisolv on shear bond strength of dentin bonding agents

AUTHOR(S)
Erhardt, Maria Carolina Guilherme; Amaral, Cristiane Mariote; De Castro, Ana Karina Barbiere Bedran; Ambrosano, Gláucia Maria Bovi; Pimenta, Luiz André Freire
PUB. DATE
November 2004
SOURCE
Quintessence International;Nov/Dec2004, Vol. 35 Issue 10, p801
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Objective: The aim of this study was to evaluate the influence of Carisolv on the shear bond strength (SBS) of hydrophilic adhesive systems in dentin. Method and materials: Two hundred bovine incisors were polished with 320-to 1,000-grit aluminum oxide paper and randomly divided into 10 groups (n = 20). The adhesive systems were used according to manufacturer's instructions, and a restorative resin composite (Definite) was inserted in a Teflon matrix and cured. The specimens were kept in humid storage for 7 days at 37'C. The SBS tests were performed in an EMIC universal testing machine with a crosshead speed at 0.5 mm/rnin. The mean values (MPa ± [5D]) were analyzed with analysis of variance and Dunnett and Tukey tests. Results: The results were expressed in decreasing values (MPa): G6 = 18.55 ± 6 95; G3 = 17.55 ± 5.73; G2 = 17.05 ± 5.33; G8 = 16.95 ± 7.13; G7 = 16.94 ± 5 22; G4 = 16.31 ± 3.38; G1 = 15.85 ± 4 45; G9 = 14.21 ± 5.87; G5 = 12.89 ± 3.79; and G10 = 12.31 ± 5.18. Conclusion: Carisolv did not interfere in the adhesion to dentin. but its cleanser technique did interfere. (Quintessence Int 2004,35:801-607}
ACCESSION #
37298752

 

Related Articles

  • Effect of 2% Chlorhexidine on Microtensile Bond Strength of Composite to Dentin. de Castro, Fabrício Luscino Alves; de Andrade, Marcelo Ferrarezi; Júnior, Sillas Luiz Lordello Duarte; Vaz, Luís Geraldo; Ahid, Fernando Jorge Mendes // Journal of Adhesive Dentistry;2003, Vol. 5 Issue 2, p129 

    Purpose: To evaluate the effect of 2% chlorhexidine on the microtensile bond strength of composite resin to dentin treated with three dentin bonding systems. Materials and Methods: Flat dentinal surfaces were prepared in 24 extracted human third molars. Teeth were randomly divided into 8...

  • Factors Contributing to the Incompatibility Between Simplified-step Adhesives and Self-cured or Dual-cured Composites. Part II. Single-bottle, Total-etch Adhesive. Tay, Franklin R.; Suh, Byoung I.; Pashley, David H.; Prati, Carlo; Shu-Fen Chuang; Feng Li // Journal of Adhesive Dentistry;2003, Vol. 5 Issue 2, p91 

    Purpose: As adhesives containing hydrophilic/acidic resin components are vulnerable to water movement after polymerization, this study tested the hypothesis that coupling of a single-bottle adhesive (OptiBond Solo Plus) to self/dual-cured composites is compromised by adhesive permeability, even...

  • Shear Bond Strength of One 4th and Two 7th Generation Bonding Agents when used by Operators with Different Bonding Experience. Söderholm, Karl-Johan M.; Guelmann, Marcio; Bimstein, Enrique // Journal of Adhesive Dentistry;2005, Vol. 7 Issue 1, p57 

    Purpose: To test the hypothesis that simpler-to-use dentin adhesives (7th-generation adhesives) perform better when used by inexperienced operators than do the more complex 4th-generation adhesives. Materials and Methods: Six operators with no previous experience regarding dental adhesives,...

  • Evaluating a Method of Artificially Hypermineralizing Dentin to Simulate Natural Conditions in Bonding Studies. Cilli, Renato; Prakki, Anuradha; de Araújo, Paulo Amarante // Journal of Adhesive Dentistry;2005, Vol. 7 Issue 4, p271 

    Purpose: This study tested an in vitro model of dentin hypermineralization, aiming to simulate naturally hypermineralized dentin for bond strength studies. The effect on bond strength of a double-etching treatment on the artificially hypermineralized substrate was also evaluated. Materials and...

  • Mechanical Disruption of Dentin Collagen Fibrils During Resin-Dentin Bond Testing. Tay, Franklin R.; Carvalho, Ricardo M.; Yiu, C. K. Y.; King, N. M.; Zhang, Y.; Agee, K.; Bouillaguet, S.; Pashley, David H. // Journal of Adhesive Dentistry;Autumn2000, Vol. 2 Issue 3, p175 

    Purpose: To determine if collagen fibrils on the dentin side of failed resin-dentin interfaces undergo mechanical disruption during microtensile bond testing. Materials and Methods: Extracted, caries-free human third molars were divided into four groups. The occlusal enamel was removed, leaving...

  • Modified Surface-active Monomers for Adhesive Bonding to Dentin. VENZ, S.; DICKENS, B. // Journal of Dental Research;Mar1993, Vol. 72 Issue 3, p582 

    PMGDM, a PMDM-type adhesive monomer, was synthesized from pyromellitic dianhydride and glycerol dimethacrylate. Only the para isomer of PMDM, a solid, is used in dental adhesives. The adhesive monomer PMGDM is a liquid and consists of a mixture of para- and meta isomers. This study shows that...

  • Adaptation of Adhesive Posts and Cores to Dentin After Fatigue Testing. Dietschi, Didier; Romelli, Massimo; Goretti, Alessandro // International Journal of Prosthodontics;Nov/Dec1997, Vol. 10 Issue 6, p498 

    An in vitro nondestructive fatigue test was applied to adhesive posts and cores made on endodontically treated human teeth. Five post-and-core systems were evaluated: one zircon oxide post, two titanium posts (with resinous or ceramic coating) and two resin-fiber posts. Each test specimen was...

  • Bond Strength of Resin Cement to Dentin and to Surface-treated Posts of Titanium Alloy, Glass Fiber, and Zirconia. Sahafi, Alireza; Peutzfeldt, Anne; Asmussen, Erik; Gotfredsen, Klaus // Journal of Adhesive Dentistry;2003, Vol. 5 Issue 2, p153 

    Purpose: To determine the effect of surface treatments on bond strength of two resin cements (ParaPost Cement and Panavia F) to posts of titanium alloy (ParaPost XH), glass fiber (ParaPost Fiber White), and zirconia (Cerapost), and to dentin. Materials and Methods: After embedding, planar...

  • BONDING AGENTS AND ADHESIVES. PHILLIPS, R. W. // Advances in Dental Research;Aug1988, Vol. 2 Issue 1, p150 

    Development of molecules which will adhere to tooth structure is a high-priority area of dental research. 'Although enamel and dentin present formidable obstacles to adhesive mechanisms, there is substantial progress in the formulation of agents which are already altering certain procedures,...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics