Assessment of Shear Bond Strength Between Three Denture Reline Materials and a Denture Base Acrylic Resin

Takahashi, Yutaka; Chai, John
November 2001
International Journal of Prosthodontics;Nov/Dec2001, Vol. 14 Issue 6, p531
Academic Journal
Purpose: This study reports the effect of five surface treatments on the bond strength established between three denture reline materials and a denture base resin. Materials and Methods: Cylindric columns of denture reline materials were bonded to columns of denture base resins that received one of the surface treatments: application of dichloromethane, the monomer of the denture base resin, the recommended bonding agent or the monomer of the denture reline material, polishing with 240-grit silicone carbide paper, and air abrasion. A control group without surface treatment was included for each material. Specimens were immersed in water for 1 day and then thermocycled. The strength at which the bond failed under shear was recorded. Results: None of the surface treatments significantly improved the bond strength of Kooliner. Triad bonding agent and denture base monomer applications most significantly improved the bond strengths of Triad and GC reline, respectively. Conclusion: Triad bonding agent and denture base monomer should be used in conjunction with Triad and GC reline, respectively, when relining a denture base resin.


Related Articles

  • A Technique for Removing Implant-Retained Denture: Direct Relining Complication. Duran, İbrahim; Yilmaz, Betül; Ural, Çağrı // Case Reports in Dentistry;6/23/2015, Vol. 2015, p1 

    The aim of this case report is to present a technique for removing the denture which locked to ball-attachment because of excessive hard relining resin material flows around the ball-attachment. An alternative method was used in the present case. A cylindrical resin was removed with a diamond...

  • Bonding procedures for Intraoral Repair of Exposed Metal with Resin Composite. Kiatsirirote, Kritira; Northeast, Simon E.; van Noort, Richard // Journal of Adhesive Dentistry;Winter1999, Vol. 1 Issue 4, p315 

    Purpose: To determine if tin plating can be recommended for intraoral repair of ceramic veneered cast restorations where metal of unknown composition is exposed by loss of ceramic. This study investigated the effectiveness of surface treatments incorporating tin plating and unfilled resin to...

  • An Abrasion Test for Composite Resins. EHRNFORD, LARS; DÉRAND, TORE; LARSSON, LARS-ÅKE; SVENSSON, ALVAR // Journal of Dental Research;Apr1980, Vol. 59 Issue 4, p716 

    An abrasive wear test for composite resins was proposed. A slurry of glass pearls and abrasive particles were used. The abrasive effect was examined for different particle sizes. Particle sizes were found which gave the same order of wear as found clinically for an amalgam, a composite resin,...

  • Inhibition of Marginal Leakage with a Dentin Bonding Agent. DUMSHA, T.; BIRON, G. // Journal of Dental Research;Oct1984, Vol. 63 Issue 10, p1255 

    Class V cavity preparations were treated in vitro with dentin bonding agents and composite. The teeth were thermally cycled, stained, and scored for marginal leakage, by a silver stain technique. The composite-only control group leaked significantly more than did the dentinbonding-treated...

  • Effect of multiple application of dentin bonding agent on marginal integrity of resin composite. Asakawa, T.; Manabe, A.; Itoh, K.; Tani, C.; Inoue, M.; Sasa, R. // Journal of Clinical Pediatric Dentistry;Spring2002, Vol. 26 Issue 3, p257 

    The purpose of the present study was to examine the effect of multiple application of dentin bonding agent to the adhesive surface on the marginal integrity of resin composite. The effect of multiple applications was evaluated by measuring the wall-to-wall polymerization contraction gap and by...

  • Outside-the-(Cavity-prep)-Box Thinking. Thompson, V.P.; Watson, T.F.; Marshall, G.W.; Blackman, B.R.K.; Stansbury, J.W.; Schadler, L.S.; Pearson, R.A.; Libanori, R. // Advances in Dental Research;Nov2013, Vol. 25 Issue 1, p24 

    Direct placement restorative materials must interface with tooth structures that are often compromised by caries or trauma. The material must seal the interface while providing sufficient strength and wear resistance to assure function of the tooth for, ideally, the lifetime of the patient....

  • Increased Wall-to-Wall Curing Contraction in Thin Bonded Resin Layers. FEILZER, A. J.; DE GEE, A. J.; DAVIDSON, C. L. // Journal of Dental Research;Jan1989, Vol. 68 Issue 1, p48 

    Wall-to-wall (WTW) polymerization contraction of filled and unfilled chemically and photo-initiated resins was studied in relation to the WTW distance. In an experimental set-up, the resins were bonded to two opposing disks, and the axial (WT7J displacement resulting from the polymerization...

  • Inhibition of Bacterial Growth under Composite Restorations Following GLUMA Pretreatment. FELTON, D.; BERGENHOLTZ, G.; COX, C. F. // Journal of Dental Research;Mar1989, Vol. 68 Issue 3, p491 

    The purpose of this investigation was to test in five adult monkeys the effects of aglutaraldehyde-containing dentin bonding agent, GLUMA, on bacterial colonization in Class V cavities restored with composite resin. Experimental groups consisted of immediate placement of GLUMA and composite...

  • An evaluation and comparison of shear bond strength of composite resin to dentin, using newer dentin bonding agents. Hegde, Mithra N.; Bhandary, Shruti // Journal of Conservative Dentistry;Apr/Jun2008, Vol. 11 Issue 2, p71 

    The purpose of this study was to assess the shear bond strength of Total etch Prime and Bond NT and self etch newer dentin bonding agents Clearfil S3, Xeno III Bond, Clearfil Protect Bond and G Bond used to bond composite resin to dentin, and to compare the difference in the shear bond strengths...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics